Link to USGS Home Page

METHODS FOR SAMPLING AND INORGANIC ANALYSIS OF COAL
U.S. Geological Survey Bulletin 1823

Edited by D.W. Golightly and F.O. Simon

This manual presents a collection of detailed procedures used in geochemical laboratories of the U.S. Geological Survey for the chemical characterization of coal.


CONTENTS

Methods for Sampling and Inorganic Analysis of Coal - Introduction
By D.W. Golightly and F.O. Simon

Abstract
Introduction
References


Sampling of Coal Beds for Analysis
By R.W. Stanton

Abstract
Purposes of sampling a coal bed
Historical perspective of sampling
Sampling for rank classification
Sampling for chemical analysis
Sampling for other purposes
Procedure for channel sampling
Procedure for sampling drill core
Coal bed descriptions
Identification of carbonaceous shale layers
Sampling thick coal beds
Summary
References


Preparation of Coal for Analysis
By F.G. Walthall and S.L. Fleming, II

Abstract
Introduction
Equipment and procedures
     
Sample preparation (grinding) laboratory - equipment
     
Safety equipment and provisions
     
Safety procedures
     
Maintenance of equipment
     
Sample preparation (grinding) laboratory - facilities
     
Crushing and grinding
     
Description of procedure
     
Ashing procedure
     
Cleaning of work area and equipment
References


Automated Semiquantitative Direct-Current Arc Spectrographic Determination of 64 Elements in Coal Ash

By A.F. Dorrzapf, Jr., C.J. Skeen, and W.B. Crandell

Abstract
Introduction
The method
Exposure procedure
The scanning microphotometer system
The minicomputer configuration
Data handling
Wavelength calibration
Concentration calibration
Spectral-interference corrections
Plate emulsion calibration
Quality control
Conclusions
References


The Determination of 4l Elements in Whole Coal by Instrumental Neutron Activation Analysis
By C.A. Palmer and P.A. Baedecker

Abstract
Introduction
Activation analysis
Experimental methods and procedures
     Sample preparation
     
Standards
     
Counting facilities
     
Data reduction
     
Quality control
Discussion
References


The Determination of Major and Minor Elements in Coal Ash and of Chlorine and Phosphorus in Whole Coal by X-Ray Fluorescence Spectrometry
By R.G. Johnson, G.A. Sellers, and S.L. Fleming, II

Abstract
Introduction
Experimental methods and procedures
     
Equipment and supplies
     
Coal ash
     
Whole coal
Conclusions
References


Analysis of Coal Ash by Atomic Absorption Spectrometric and Spectrophotometric Methods
By F.W. Brown and Hezekiah Smith

Abstract
Introduction
Spectrophotometric procedures
Atomic absorption spectrometric methods
Precision of analysis
Preparation of sample solution
     
Reagents and supplies
     
Procedure
Determination of silicon (as SiO2)
     
Reagents and equipment
     
Procedure
Determination of aluminum (as Al203)
     
Reagents, supplies, and equipment
     
Procedure
Determination of phosphorus (as P205)
     
Reagents and equipment
     
Procedure
Determination of titanium (as TiO2)
     
Reagents and equipment
     
Procedure
Determination of calcium, iron, magnesium, manganese, potassium, and sodium
     
Reagents and equipment
     
Procedure for calcium, iron, magnesium, and manganese
     
Procedure for potassium and sodium
Conclusions
References


The Determination of Selected Elements in Coal Ash by Atomic Absorption Spectrometry
By J .S. Kane

Abstract
Introduction
Experimental methods and procedures
     
Dissolution of samples
     
Cadmium extraction
     
Calibration solutions
Instrumentation
Discussion of results
     
Manganese
     
Lead
     
Zinc
     
Copper
     
Lithium
     
Sodium
     
Magnesium
     
Cadmium
References


The Determination of Mercury in Whole Coal by Cold-Vapor Atomic Absorption Spectrometry
By P.J. Aruscavage and Roosevelt Moore

Abstract
Introduction
Experimental equipment and methods
     
Equipment
     
Reagents
     
Calibration standards
     
Coal standards
Procedures
     
Dissolution of samples
     
Determination of mercury
Discussion
References


The Determination of Fluoride in Coal by Ion-Selective Electrode
By Herbert Kirschenbaum

Abstract
Introduction
Experimental methods and procedures
     
Equipment
     
Reagents
     
Procedure
Accuracy, precision, and detectability
References


The Determination of Forms of Sulfur in Coal
By Norma Rait and P.J. Aruscavage

Abstract
Introduction
Experimental equipment and methods
     
Sample requirements
     
Laboratory, supplies, and equipment
     
Methods
          
Total sulfur
          
Laboratory setup for the separation of forms of sulfur
          
Monosulfide sulfur separation and determination
          
Sulfate sulfur separation and determination
          
Pyritic sulfur separation and determination
          
Calculation of organically bound sulfur
Discussion
References


Appendix: Reference Materials for Coal Analysis
By D.W. Golightly and F.O. Simon

Sulfur in coal: NBS standards 2682 through 2685
Trace mercury in coal: NBS standard 1630
Concentrations of elements in NBS-SRM coals and coal fly ash
MINTEK coal standards: South African reference materials
BCR reference materials
     CRM 065 coal
     
CRM 038 fly ash from pulverized coal
Premium coal sample program, Argonne National Laboratory
Coal and coal-ash standards for trace elements and radioactivity, International Atomic Energy Agency
Trace metals in coal
Alpha Resources, Inc.
U.S. Geological Survey coal standard:
Preliminary data for whole coal


FIGURES

  1. Flowchart for samples and analyses of coals
  2. Correlation of facies of a single coal bed
  3. Natural gamma and high-resolution density logs of a coal bed showing log responses of coal and impure coal or parting
  4. Container for collection of core samples
  5. Example of description of generalized stratigraphic section of the Upper Freeport coal bed
  6. Ash yields of 134 facies samples of the Upper Freeport coal bed
  7. X-ray radiograph of an undisturbed coal core showing mineral impurities and coal lithotype layers
  8. Sample preparation laboratories
  9. Sample preparation procedure for coals
  10. Splitting procedure
  11. Spectrum of NBS coal standard 1632 collected 5 days after irradiation
  12. Lead absorbance as a function of iron concentration in the sample matrix
  13. Zinc correlation plot
  14. Diagram of arrangement of instrumentation for the measurement of mercury in coal
  15. Two typical calibration curves
  16. Flowchart for the separation of the forms of sulfur
  17. Photograph of setup
  18. Diagrams of apparatus

TABLES

  1. Lower determination limits for elements in coal or coal ash, listed by method of analysis
  2. Selected ASTM standard methods
  3. Types of samples and purposes for which samples are commonly collected
  4. Instrumentation and operating conditions
  5. Spectral lines used in spectrographic analysis, listed in order of decreasing intensity
  6. Direct current arc spectrographic analyses of NBS standard reference material coal fly ash
  7. Long-lived (>10 h) radionuclides
  8. Short-lived indicator radionuclides
  9. Concentrations of 40 elements in multiple-element standards used for the analysis of coal
  10. Interferences in INAA due to neutron-induced fission of (235)U
  11. Instrumental operating conditions for XRF analysis of coal ash
  12. Concentration ranges provided by rock standards for the XRF analysis of coal ash
  13. XRF calibration of iron in coal ash: simple linear regression analysis results
  14. Operating conditions for XRF analysis of whole coal
  15. XRF calibration of P205 in whole coal: simple linear regression analysis results
  16. Operating conditions for atomic absorption spectrometry
  17. Estimated precision of analysis
  18. Compositions of coal ashes determined by methods based on atomic absorption spectrometry (AAS) or spectrophotometry and on X-ray fluorescence (XRF) spectrometry
  19. Operating parameters: flame and graphite-furnace atomization
  20. Detection limits, sensitivities, and calibration ranges for flame and graphite-furnace atomic absorption spectrometry
  21. Alternate operating parameters for flame atomic absorption spectrometry and calibration ranges
  22. Concentrations of eight elements in the NBS 1633 coal fly ash determined by atomic absorption spectrometric methods
  23. Concentrations of analytes determined for NBS standard reference material 1633a and for quality-control samples
  24. Some typical concentration ranges of analytes in coal ashes originating from different regions of the United States
  25. Concentrations of mercury determined by cold-vapor atomic absorption spectrometry for selected coal and fly-ash standards
  26. Dilutions for preparation of individual calibration standards
  27. Total sulfur in coal
  28. Monosulfide sulfur in coal
  29. Sulfate sulfur in coal
  30. Pyritic sulfur in coal
  31. Pyritic sulfur in coal by direct method
  32. Organically bound sulfur in coal by direct method
  33. Organically bound sulfur in coal by indirect method

ACRONYMS

AAS atomic absorption spectrometry
AES atomic emission spectrography (or spectrometry)
AFT ash fusion temperature
ASTM American Society for Testing and Materials
BCR Community Bureau of Reference (Commission of the European Communities, Brussels)
CAL calorific value
CRM certified reference material (BCR)
FSI free swelling index
HGI Hardgrove grindability index
ICP inductively coupled plasma
INAA instrumental neutron activation analysis
ISA infrared spectrometric sulfur analyzer
ISE ion selective electrode
LOI loss on ignition
MINTEK Council for Mineral Technology, South Africa
NBS National Bureau of Standards
NCRDS National Coal Resources Data System (USGS)
PVC polyvinylchloride
RSD relative standard deviation
SARM South African reference material (MINTEK)
SPGR specific gravity
SRM standard reference material (NBS)
TRIGA thermal reactor installation--General Atomic Company
USCHEM United States Chemistry data base within NCRDS
USGS United States Geological Survey
WDXRF wavelength dispersive x-ray fluorescence
XRF x-ray fluorescence

[ Coal Quality CD ]


Created by the EERT WWW Staff.

[an error occurred while processing this directive]