* Sea-Bird SBE 9 Raw Data File:
* FileName = C:\CRUISE\OC354\OC354013.DAT
* Software Version 4.222
* Temperature SN = 2271
* Conductivity SN = 1860
* Number of Bytes Per Scan = 24
* Number of Voltage Words = 4
* System UpLoad Time = Dec 06 1999 02:07:00
* NMEA Latitude = 40 15.73 N
* NMEA Longitude = 073 46.91 W
* NMEA UTC (Time) = 07:07:27
* Store Lat/Lon Data = Add to Header Only
* Command Line = seasave 
** R/V OCEANUS, WHOI    
** STATION #: ctd station 13
** down valley transect
# nquan = 18
# nvalues = 113
# units = metric
# name 0 = scan: scan number
# name 1 = pr: pressure [db]
# name 2 = timeH: time [h]
# name 3 = timeJ: time [julian days]
# name 4 = latitude: latitude [degrees]
# name 5 = longitude: longitude [degrees]
# name 6 = t090: temperature, ITS-90 [deg C]
# name 7 = c0mS/cm: conductivity [mS/cm]
# name 8 = sal00: salinity, PSS-78 [PSU]
# name 9 = v1: voltage, number  1 [V]
# name 10 = v5: voltage, number  5 [V]
# name 11 = v6: voltage, number  6 [V]
# name 12 = alt: altimeter [m]
# name 13 = sigma-é00: density, sigma-theta [kg/m^3]
# name 14 = flS: fluorometer, sea tech
# name 15 = xmiss: transmissometer
# name 16 = depS: depth, salt water [m]
# name 17 = nbin: number of scans per bin
# span 0 = 144, 3087
# span 1 = 3.000, 59.000
# span 2 = 0.002, 0.036
# span 3 = 340.08826, 340.08968
# span 4 = 40.26217, 40.26217
# span 5 = -73.78183, -73.78183
# span 6 = 10.9232, 12.9650
# span 7 = 36.092760, 39.411735
# span 8 = 32.1354, 33.5289
# span 9 = 0.863, 3.927
# span 10 = 0.079, 0.456
# span 11 = 3.429, 4.176
# span 12 = 7.63085, 101.86161
# span 13 = 24.5591, 25.2619
# span 14 = 1.726e+00, 7.862e+00
# span 15 = 68.58, 83.53
# span 16 = 2.977, 58.538
# span 17 = 10.0000, 23.0000
# interval = decibars: 0.5                              
# start_time = Dec 06 1999 02:07:00
# bad_flag = -9.990e-29
# sensor 0 = Frequency  0  temperature, 2271, 22-Jul-99
# sensor 1 = Frequency  1  conductivity, 1860, 22-Jul-99, cpcor = -9.5700e-08
# sensor 2 = Frequency  2  pressure, 63505, 10-11-1996
# sensor 3 = Extrnl Volt  1  fluorometer, sea tech, 75S
# sensor 4 = Extrnl Volt  4  altimeter
# sensor 5 = Extrnl Volt  5  seapoint turbidity meter, 1391
# sensor 6 = Extrnl Volt  6  transmissometer, 218D
# datcnv_date = Apr 04 2002 08:08:26, 4.234
# datcnv_in = OC354013.DAT OC354.CON
# datcnv_skipover = 0
# wildedit_date = Apr 04 2002 08:08:41, 4.234
# wildedit_in = OC354013.CNV
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_npoint = 100
# wildedit_vars = scan pr timeH timeJ latitude longitude t090 c0mS/cm sal00 v1 v5 v6 alt sigma-é00 flS xmiss
# wildedit_excl_bad_scans = yes
# celltm_date = Apr 04 2002 08:08:49, 4.234
# celltm_in = OC354013.CNV
# celltm_alpha = 0.0300, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary, 
# filter_date = Apr 04 2002 08:08:57, 4.234
# filter_in = OC354013.CNV
# filter_low_pass_tc_A = 0.035
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars = pr timeH v1
# filter_low_pass_B_vars = scan
# loopedit_date = Apr 04 2002 08:09:12, 4.234
# loopedit_in = OC354013.CNV
# loopedit_minVelocity = 0.250          
# loopedit_excl_bad_scans = yes
# binavg_date = Apr 04 2002 08:09:20, 4.234
# binavg_in = OC354013.CNV
# binavg_bintype = Pressure Bins
# binavg_binsize = 0.50
# binavg_excl_bad_scans = yes
# binavg_downcast_only = no
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# derive_date = Apr 04 2002 08:09:29, 4.234
# derive_in = OC354013.CNV OC354.CON
# file_type = ascii
*END*