USGS Open-File Report 2004-1443, Operation Manual for a Time-Series, Storm-Activated Suspended Sediment Sampler Deployed in the Coastal Ocean, Appendix 5

USGS Open-File Report 2004-1443, Operation Manual: Time-Series, Storm-Activated Suspended Sediment Sampler Deployed in the Coastal Ocean

Appendix 5

McLane Research Laboratories, USA
Water Transfer System Version: atwts1_3.c

╒═══════════════════════════════════════╕

│Main Menu │

╘═══════════════════════════════════════╛

S/N 453 PORT == 0

Fri Jan 18 10:28:04 2002

<1> Set Time <5> Deploy System

<2>Diagnostics <6> Offload Data

<3> Fill containers <7> Adjust ducer constants

<4>Sleep <8>About

<9> EEPROM data backup cache

Computer Font Selection ?		User Font 5
Clock reads 01/18/102 10:28:07
Change time & date (Yes/No)		[N] ?
Enter date & time of deployment [01/18/102 10:28:10] ?		1/18/102 10:35:00
Enter time delay until calibration sample [hr] (0 to 24) ?		0
Enter expected recovery date [01/18/102 10:28:31] ?		1/30/102 8:00
Enter expected number of storms (1 to 22) ?		4
Enter number of samples per storm (1 to 5) ?		5

> schedule .....

‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑VERIFICATION‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑

Event 1 of 3 = 01/18/102 10:35:00

Event 2 of 3 = 01/22/102 09:39:31

Event 3 of 3 = 01/26/102 08:49:45

Modify an event (Yes/No)		[N] ?
Enter PSDEV threshold that indicates a storm wave event[mbar](>0.01) ?		35
Enter PSDEV threshold duration [minutes] (1 to 1440) ?		2
Enter delay between storms [hrs] (0 to 240) ?		0
Enter number of pressure readings per PSDEV calculation (30 to100) ?		60
Enter interval between PSDEV calculations [min] (2 to 2) ?		2
Enter interval A1 [minutes] (2 to 600) ?		4

Computer Font		User Font
Enter interval A2 [minutes](2 to 600) ?		4
Enter sampling interval between maxima [minutes] (1 to 5760) ?		4
Enter time delay between maxima [minutes] (0 to 3) ?		3
Enter %% of elapsed deployment for first reduction (0 to 100) ?		50
Enter %% of elapsed deployment for second reduction (51 to 100) ?		70
Enter %% of elapsed deployment before time‑series only (71to 100) ?		80
Enter %% of threshold reduction (1st reduction) (0 to 100) ?		20
Enter %% of threshold reduction (2nd reduction) (20 to 100) ?		30

Computer Font		User Font
Enter pumping flow rate [ml/min] (50 to 125) ?		100
Enter minimum flow rate [ml/min] (20 to 100) ?		50
Enter volume per sample [ml] (10 to 10000) ?		250
Enter pumping time limit [seconds] (1 to 310) ?		300
Enter flushing water volume [ml] (0 to 500) ?		20
Enter the sampling period for pumping flow rates [secs] (1 to 60) ?		30

Current Header reads ‑

Do you want a different header (Yes/No) [N] ?

System shows the following ‑

01/18/102 10:30:45 27.4 Vb 6 EC 2349 mb 34.1 psi PORT = 00

Are you ready to deploy (Yes/No) [N] ? y

System is ready. Remove communication cable & deploy