H11446_2M_UTM: 2-m Bathymetric Grid of National Oceanic and Atmospheric Administration (NOAA) Survey H11446 in Long Island Sound, North of Orient Point, New York (UTM Zone 18, NAD83)

Metadata also available as - [Outline] - [Parseable text]

Frequently-anticipated questions:


What does this data set describe?

Title:
H11446_2M_UTM: 2-m Bathymetric Grid of National Oceanic and Atmospheric Administration (NOAA) Survey H11446 in Long Island Sound, North of Orient Point, New York (UTM Zone 18, NAD83)
Abstract:
The U.S. Geological Survey (USGS), in cooperation with the Connecticut Department of Environmental Protection and National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities along this part of Long Island Sound, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. Interpretive data layers were derived from the multibeam echo-sounder data and sidescan-sonar data collected north of Orient Point, New York. During April 2010, bottom photographs and surficial sediment data were acquired as part of a ground-truth reconnaissance survey. For more information on the ground-truth survey see <http://quashnet.er.usgs.gov/data/2010/10010/>.
  1. How should this data set be cited?

    National Oceanic and Atmospheric Administration, and U.S. Geological Survey, 2011, H11446_2M_UTM: 2-m Bathymetric Grid of National Oceanic and Atmospheric Administration (NOAA) Survey H11446 in Long Island Sound, North of Orient Point, New York (UTM Zone 18, NAD83): Open-File Report 2010-1100, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    McMullen, K.Y., Poppe, L.J., Danforth, W.W., Blackwood, D.S., Schaer, J.D., Guberski, M.R., Wood, D.A., and Doran, E.F., 2011, Surficial Geology of the Sea Floor in Long Island Sound Offshore of Orient Point, New York: Open-File Report 2010-1100, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    Other_Citation_Details: CD-ROM

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -72.325982
    East_Bounding_Coordinate: -72.226380
    North_Bounding_Coordinate: 41.183078
    South_Bounding_Coordinate: 41.137708

  3. What does it look like?

    <https://pubs.usgs.gov/of/2010/1100/data/bathy/grids/utm/h11446_2m_utm.gif> (GIF)
    Thumbnail image showing the 2-m gridded bathymetry collected during NOAA survey H11446 in UTM Zone 18

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 22-Sep-2008
    Ending_Date: 21-Oct-2008
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: raster digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 2392 x 4107 x 1, type Grid Cell

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 18
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.999600
      Longitude_of_Central_Meridian: -75.000000
      Latitude_of_Projection_Origin: 0.000000
      False_Easting: 500000.000000
      False_Northing: 0.000000

      Planar coordinates are encoded using row and column
      Abscissae (x-coordinates) are specified to the nearest 2.000487
      Ordinates (y-coordinates) are specified to the nearest 2.000487
      Planar coordinates are specified in meters

      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257222.

      Vertical_Coordinate_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: Mean lower low water
      Depth_Resolution: 0.1
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Explicit depth coordinate included with horizontal coordinates

  7. How does the data set describe geographic features?

    Entity_and_Attribute_Overview:
    A 2-m grid of the multibeam bathymetry from NOAA survey H11446 in UTM Zone 18, NAD83.


Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    U.S. Geological Survey
    c/o Katherine McMullen
    Field and Laboratory Technician
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2277 (voice)
    (508) 457-2310 (FAX)
    kmcmullen@usgs.gov


Why was the data set created?

To release an ESRI binary grid of the 2-m bathymetry generated from NOAA survey H11446 north of Orient Point, New York in UTM Zone 18, NAD83.


How was the data set created?

  1. From what previous works were the data drawn?

    (source 1 of 1)
    National Ocean Survey, National Oceanic and Atmospheric Adminis, Unpublished Material, H11446 bathymetry.

    Type_of_Source_Media: disc
    Source_Contribution: Original processed multibeam bathymetric data.

  2. How were the data generated, processed, and modified?

    Date: 2008 (process 1 of 5)
    Bathymetric data were acquired in extended Triton data format (XTF) and recorded digitally through an ISIS data acquisition system. RESON 8101 and 8125 multibeam echosounders hull-mounted on two 29' launches deployed from the NOAA ship Thomas Jefferson were used to acquire the sounding data. All positioning and attitude were determined with Trimble DSM212L DGPS receivers and Applanix POS/MV Model 320 v.4 inertial navigation systems. The data were processed using CARIS HIPS (Hydrographic Image Processing System) software for quality control, and to incorporate sound velocity and tidal corrections. Sound velocity corrections were derived using frequent SEACAT CTD (conductivity-temperature-depth) profiles. Typically, a CTD cast was conducted every three to four hours of multibeam acquisition. Tidal zone corrections were calculated from data acquired at the New London, CT, and New Haven Harbor, CT, tidal gauges. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The data were gridded to 2-m resolution and saved as a CARIS HIPS database. Vertical datum is mean lower low water; X and Y units are meters; UTM Zone 18, NAD83.

    Person who carried out this activity:

    National Oceanic and Atmospheric Administration
    c/o Jasper Schaer
    Field Operations Officer
    439 West York Street
    Norfolk, VA 23510
    USA

    757-441-6726 (voice)
    jasper.schaer@noaa.gov

    Data sources produced in this process:
    • CARIS HIPS database

    Date: 2010 (process 2 of 5)
    The field sheet from survey H11446 (average depths, not the shoal based fieldsheets) was imported into the Fledermaus v6.7 program DMagic to make an equivalent digital terrain model (DTM) file. The floating point format for each sounding depth point is preserved during data import. Additionally, this fieldsheet was imported into DMagic as "gridded data", therefore re-gridding of data did not occur during the import process and thus preserved the original resolutions of the CARIS fieldsheet: H11446 2-meter cell size. Projection information for the H11446 CARIS fieldsheet is: UTM Zone 18N NAD 83.

    Person who carried out this activity:

    Bill Danforth
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598

    508-548-8700 x2274 (voice)
    508-457-2310 (FAX)
    bdanforth@usgs.gov

    Data sources used in this process:
    • CARIS HIPS database

    Data sources produced in this process:

    • h11446_2m.dtm

    Date: 2010 (process 3 of 5)
    The H11446 DTM file was then exported as an ESRI ASCII raster file from the DMagic program (H11446_2m.asc). The export process preserves the floating point values of the grid cell nodes.

    Person who carried out this activity:

    Bill Danforth
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543
    USA

    508-548-8700 x2274 (voice)
    508-457-2310 (FAX)
    bdanforth@usgs.gov

    Data sources used in this process:
    • h11446_2m.dtm

    Data sources produced in this process:

    • H11446_2m.asc

    Date: 2010 (process 4 of 5)
    The H11446 ESRI ASCII raster file was imported into ArcMap v9.3 using the ASCII to Raster tool (ArcToolbox, Conversion Tools, To Raster). The only option set here is to import each sounding grid cell value as a floating point number. The resulting grid, H11446_2m_utm, retains the original CARIS fieldsheet 2 meter grid cell size.

    Person who carried out this activity:

    Bill Danforth
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598

    508-548-8700 x2274 (voice)
    508-457-2310 (FAX)
    bdanforth@usgs.gov

    Data sources used in this process:
    • H11446_2m.asc

    Data sources produced in this process:

    • h11446_2m_utm

    Date: 2010 (process 5 of 5)
    The spatial reference for the H11446 grid was then matched to the original fieldsheet by editing the spatial information properties for the grid in ArcCatalog v9.3. The coordinate system is UTM Zone 18N, and the datum selected is NAD 83.

    Person who carried out this activity:

    Bill Danforth
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598

    508-548-8700 x2274 (voice)
    508-457-2310 (FAX)
    bdanforth@usgs.gov

    Data sources used in this process:
    • h11446_2m_utm

    Data sources produced in this process:

    • h11446_2m_utm

  3. What similar or related data should the user be aware of?

    Schattgen, P. Tod , 2008, H11446: Descriptive Report H11446, National Ocean Survey, National Oceanic and Atmospheric Administration, Atlantic Hydrographic Branch, Norfolk, VA.

    Online Links:

    Poppe, L.J., McMullen, K.Y., Ackerman, S.D., Blackwood, D.S., Irwin, B.J., Schaer, J.D., Lewit, P.G., and Doran, E.F., 2010, Sea-Floor Geology and Character Offshore of Rocky Point, New York: Open-File Report 2010-1007, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    Other_Citation_Details: DVD
    Poppe, L.J., DiGiacomo-Cohen, M.L., Doran, E.F., Smith, S.M., Stewart, H.F., and Forfinski, N.A., 2007, Geological interpretation and multibeam bathymetry of the sea floor in the vicinity of the Race, eastern Long Island Sound: Open-File Report 2007-1012, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    Other_Citation_Details: DVD
    Poppe, L.J., Denny, J.F., Williams, S.J., Moser, M.S., Forfinski, N.A., Stewart, H.F., and Doran, E.F., 2007, The geology of Six Mile Reef, eastern Long Island Sound: Open-File Report 2007-1191, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    Other_Citation_Details: DVD
    McMullen, K.Y., Poppe, L.J., Danforth, W.W., Blackwood, D.S., Schaer, J.D., Ostapenko, A.J., Glomb, K.A., and Doran, E.F., 2010, Surficial Geology of the Sea Floor in Long Island Sound Offshore of Plum Island, New York: Open-File Report 2010-1005, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    Other_Citation_Details: CD-ROM


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

    Navigation was by differential GPS. CARIS HIPS was used to process bathymetry data including correcting for antenna offset.

  3. How accurate are the heights or depths?

    The vertical resolution of the original bathymetry data is approximately 0.5% of the water depth.

  4. Where are the gaps in the data? What is missing?

    All collected data were processed and used to produce this dataset.

  5. How consistent are the relationships among the observations, including topology?

    No additional checks for consistency were performed on this data.


How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None
Use_Constraints:
Data are not to be used for navigation purposes. Public domain data are freely redistributable with proper metadata and source attribution. Please recognize the National Oceanic and Atmospheric Administration (NOAA) and U.S. Geological Survey (USGS) as the originators of this information.

  1. Who distributes the data set? (Distributor 1 of 1)

    U.S. Geological Survey
    c/o Larry Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2314 (voice)
    (508) 457-2310 (FAX)
    lpoppe@usgs.gov

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor the National Oceanic and Atmospheric Administration (NOAA), nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS or NOAA in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  4. How can I download or order the data?

  5. What hardware or software do I need in order to use the data set?

    The user must have a program capable of reading the ESRI grid data format. The user must have software capable of uncompressing archived zip files, such as WinZip or Pkware.


Who wrote the metadata?

Dates:
Last modified: 10-Nov-2010
Metadata author:
Katherine McMullen
U.S. Geological Survey
Field and Laboratory Technician
384 Woods Hole Road
Woods Hole, MA 02543-1598
USA

(508) 548-8700 x2277 (voice)
(508) 457-2310 (FAX)
kmcmullen@usgs.gov

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
Metadata extensions used:


Generated by mp version 2.8.25 on Wed Nov 10 12:46:14 2010