|
SI to Inch/Pound
| Multiply |
By |
To obtain |
Length |
| millimeter (mm) |
0.03937 |
inch (in.) |
| centimeter (cm) |
0.3937 |
inch (in.) |
| meter (m) |
3.281 |
feet (ft) |
| meter (m) |
1.094 |
yard (yd) |
| kilometer (km) |
0.6214 |
mile (mi) |
| kilometer (km) |
0.5400 |
mile, nautical (nmi) |
Area |
| square meter (m²) |
4,047 |
acre |
| square kilometer (km²) |
247.1 |
acre |
Volume |
| cubic meter (m³) |
1.308 |
cubic yard (yd³) |
Flow rate |
| centimeter per second (cm/s) |
0.3937 |
inch per second (in/s) |
| meter per second (m/s) |
3.281 |
foot per second (ft/s) |
| cubic meter per second (m³/s) |
35.31 |
cubic foot per second (ft³/s) |
The frequency of multibeam bathymetry is measured in kilohertz (kHz), one thousand periods per second.
Horizontal coordinate information projected in Universal Transverse Mercator (UTM) Zone 18 is referenced to the North American Datum of 1983 (NAD 83); horizontal information in geographic coordinates is referenced to the World Geodetic System 1984 (WGS 84). The vertical datum for tidal-zone measurements is mean lower low water (MLLW).
Abbreviations
CT DEEP - Connecticut Department of Energy and Environmental Protection
DGPS - differential global positioning system
DTM - digital terrane model
GIS - geographic information system
kyBP - thousands of years before present
MBES - multibeam echosounder
mg - milligram
NOAA - National Oceanic and Atmospheric Administration
OSV - ocean survey vessel
R/V - research vessel
SEABOSS - Seabed Observation and Sampling System
USGS - U.S. Geological Survey |
U.S. Department of the Interior |
U.S. Geological Survey
