Revision History for SIR 2013–5227

Charles E. Heywood

Simulation of Groundwater Flow in the “1,500-Foot” Sand and “2,000-Foot” Sand, with Scenarios to Mitigate Saltwater Migration in the “2,000-Foot” Sand of the Baton Rouge Area, Louisiana
-----------------------------------------------------
Posted online March 17, 2014

-----------------------------------------------------
Revised and reposted June 11, 2014, version 1.2

Page 24, table 4: Parameter values corrected as follows:

Horizontal hydraulic conductivity

Parameter name		Calibrated value
k_2400sand		10.0
k_2400sand2		40.0
k_2800sand		35.8

Fault hydraulic characteristic

Parameter name		Calibrated value
fault_2kmid			8.0E-5
fault_2ka			3.0E-5
fault_2kb			3.0E-5
fault_2kc			3.0E-5


Revised and reposted April 28, 2014, version 1.1

Added version number to cover, spine, and front matter.
Page 12:  “Hydrogeologic Framework” section, reference to table 1 changed to table 2.
Page 20:  “Internal Flow Package” section, reference to fig. 1 changed to fig. 12.
Page 20:  Replaced, “the representation for layer 1 and where indicated in figure 1, whereas in layers 8 through 22 the fault is offset 1,000 ft south of the representation for layer 1.” with “its surface location as indicated in figure 1, whereas in layers 8 through 22 the fault is offset 1,000 ft south of its surface location.”
Page 24:  Table 4, replaced reference to figure 12 with figure 13.
Page 48:  “Scenario 1: Continued Groundwater Withdrawals at 2007 Rates” section, added “A,B” to fig. 17 reference.