U.S. DEPARTMENT OF THE INTERIOR / U.S. GEOLOGICAL SURVEY U.S. GEOLOGICAL SURVEY DIGITAL DATA SERIES DDS-13 International Phase of Ocean Drilling Seismic Line 1 Demultiplexed Data Cape Hatteras to Mid-Atlantic Ridge README.1ST INTRODUCTION This CD-ROM is part of a 39 disc collection containing the demultiplexed seismic data from a 3400-km-long multichannel seismic-reflection profile extending from Cape Hatteras, N.C., to the rift valley of the Mid-Atlantic Ridge. The data were collected in 1974 as part of the International Phase of Ocean Drilling (IPOD) which was jointly funded by the U.S. Geological Survey (USGS) and the National Science Foundation's Deep Sea Drilling Project (DSDP). Each disc in the collection contains: * Binary files of SEG-Y format demultiplexed seismic data for a portion of the profile. * Graphic image files of the original observers' logs kept during data acquisition. * A text file of shotpoint locations and a graphic image of a figure illustrating those locations. * DOS-based software allowing: - interactive display of the SEG-Y demultiplexed data. - interactive display of the observers' logs graphic images. - interactive SEG-Y data review and editing. * Documentation. Please see OVERVIEW.TXT in the DOCFILES subdirectory for more information. 1 This CD-ROM has been produced in accordance with the International Standards Organization (ISO) 9660 standard. The data and text files can be read by any platform having CD-ROM driver software that supports this standard. DOS SOFTWARE INSTALLATION The software on disc may be used from the DOS command line or through a menu system which may be installed. To run the software from the command line, use the programs as described by the appropriate documents. Please see SOFTWARE, below. In order to install the menu system: * Place the CD-ROM in the CD-ROM reader. * Make the CD-ROM reader the current working directory. * Type INSTALL. This will place a file named DDS13.BAT in a user-specified directory which will execute the menu system. To use the menu system, make that user-specified directory the current working directory, and type "DDS13" at the DOS command line. This information is repeated in the documentation file GETSTART.TXT. MINIMUM DOS SYSTEM REQUIREMENTS The minimum DOS system requirements to use the data and display software are as follows: * IBM or compatible personal computer, having an 80286 or higher numbered processor. An 80386 or higher is recommended. * 512 kb RAM. * MS- or PC-DOS version 3.1 or later. * Microsoft MSCDEX version 2.1 or later. * CD-ROM drive with ISO 9660 software driver. * EGA, VGA, or Hercules graphics system. 2 DISCLAIMER This Compact Disc-Read Only Memory (CD-ROM) publication was prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of the information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Although all data and software published on this CD-ROM have been used by the USGS, no warranty, expressed or implied, is made by the USGS as to the accuracy of the data and related materials and/or functioning of the software. The act of distribution shall not constitute any such warranty and no responsibility is assumed by the USGS in the use of this data, software, or related materials. 3