U.S. DEPARTMENT OF THE INTERIOR / U.S. GEOLOGICAL SURVEY
                                
                                
                   U.S. GEOLOGICAL SURVEY DIGITAL DATA SERIES DDS-13
                                
                         International Phase of Ocean Drilling
                           Seismic Line 1 Demultiplexed Data
                          Cape Hatteras to Mid-Atlantic Ridge
                                







                                   AUTHORS

                                 F.N. Zihlman
                                  C.C. Abston
                                  D.J. Taylor
                                  W.A. Agena
                                  H.O. Oliver


                       Compiled and Edited by F.N. Zihlman


                             U.S. Geological Survey
                             P.O. Box 25046, MS-960
                             Denver Federal Center,
                                Denver, CO 80225






















                                    1


                             TECHNICAL INFORMATION
                        MINIMUM DOS SYSTEM REQUIREMENTS

              This  CD-ROM  was  produced  in  accordance with the ISO 9660
          standard; however,  it is intended for use only on DOS-based com-
          puter  systems.   The minimum system requirements to use the data
          with the software provided on this disc are as follows:
           DOS

               * IBM or compatible personal computer, having an 80286 or
                 higher numbered processor.  An 80386 or higher is greatly
                 suggested.
               * 512 kb RAM.
               * MS- or PC-DOS version 3.1 or later.
               * Microsoft MSCDEX version 2.1 or later.
               * CD-ROM drive with ISO 9660 software driver.
               * EGA/VGA/Hercules graphics system.
               * Hard disk drive



              To get started: DOS users should make the  CD-ROM  drive  the
          active drive; then type INSTALL<RETURN>.






       End of text; press the Escape key to continue.


                                        2