Identification_Information: Citation: Citation_Information: Originator: Steve P Schilling Originator: Sarah Doelger Originator: David R. Sherrod Originator: Larry G. Mastin Originator: William E. Scott Publication_Date: 2007 Title: Digital Data for Volcano Hazards at Newberry Volcano, Oregon Geospatial_Data_Presentation_Form: vector digital data Series_Information: Series_Name: U.S. Geological Survey Open-file Report Publication_Information: Publication_Place: Vancouver, WA Publisher: U.S. Geological Survey Online_Linkage: http://vulcan.wr.usgs.gov/Volcanoes/Newberry/Hazards/OFR97-513/OFR97-513_inlined.html Description: Abstract: Newberry shield volcano is located in central Oregon and has 25 vents that have been active during several eruptions over the past 10,000 years. Such past events at Newberry have included both quiet lava flows and explosive discharges of pumice and ash. The volcano is presently quiet, however, future eruptions could have impacts on the campgrounds, resorts, and lakes within the volcano's caldera as well as the settlements in the Paulina Creek valley west of the mountain. Scientists at the USGS Cascade Volcano Observatory created a GIS data layer, nbhaz, to depict zones subject to the effects of an explosive pyroclastic eruption (tephra fallout, pyroclastic flows, and ballistics). Additionaly, the same GIS data set includes: 1) Lava flow hazard zones, both within and out of the caldera. 2) A hazard zone for volcanic gasses. 3) A hazard zone for lahars/floods in Paulina Creek. Finally, a separate GIS data layer, nbwells, depicts drill holes on the flanks of Newberry Volcano that were used to estimate the probability of coverage by future lava flows. Purpose: These volcanic hazard zones are intended for use by public and private agencies to view, overlay with other Geographic Information System (GIS) data sets, and make maps of hazards from potential future eruptions of volcanoes in the Newberry Crater region. It is critical to understand the nature of the boundaries of the volcanic hazard zones. Although arcs serve as boundaries of hazard zones, the degree of hazard does not change abruptly at these boundaries. Rather, a volcanic hazard decreases gradually with increased distance from the volcano and above the valley floor. These volcanic hazards also span a range of size and recurrence. The hazard zones delineated in this data set portray events believed most likely from future activity in the Newberry Crater area. Areas outside the hazard zones, especially those having low relief, should not be regarded as hazard-free. Too many uncertainties exist in source, size, and mobility of future events to locate boundaries of zero-hazard zones with confidence. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1997 Currentness_Reference: 1997 Status: Progress: Complete Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -121.679118 East_Bounding_Coordinate: -120.929479 North_Bounding_Coordinate: 44.134751 South_Bounding_Coordinate: 43.369722 Keywords: Theme: Theme_Keyword_Thesaurus: none Theme_Keyword: lava flow Theme_Keyword: caldera Theme_Keyword: pyroclastic eruption Theme_Keyword: shield volcano Place: Place_Keyword_Thesaurus: none Place_Keyword: Newberry Volcano Place_Keyword: Cascade Range Place_Keyword: Oregon Access_Constraints: none Use_Constraints: Although digital data is easy to view at nearly any scale or projection, each vector data set has a compilation scale that determines the accuracy and reliable use of the data set. The vectors in this data set were compiled and checked for accuracy at a scale of 1:100,000 and thereby should only be used at 1:100,000 or smaller scales. The data set is inappropriate for use at scales larger than 1:100,000. Doing so will produce inaccurate and unreliable results. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Cascade Volcano Observatory Contact_Address: Address_Type: mailing and physical address Address: 1300 SE Cardinal Ct. Suite 100 City: Vancouver State_or_Province: WA Postal_Code: 98683 Contact_Voice_Telephone: 360-993-8900 Contact_Facsimile_Telephone: 360-993-8980 Data_Set_Credit: U.S. Geological Survey Volcano Hazards Program Security_Information: Security_Classification_System: none Security_Classification: Unclassified Security_Handling_Description: none Native_Data_Set_Environment: Microsoft Windows 2000 Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 8.3.0.800 Cross_Reference: Citation_Information: Originator: David R. Sherrod Originator: Larry G. Mastin Originator: William E. Scott Originator: Steven P. Schilling Publication_Date: 1997 Title: Volcano Hazards at Newberry Volcano, Oregon Series_Information: Series_Name: U.S. Geological Survey Open-file Report Issue_Identification: 97-513 Publication_Information: Publication_Place: Vancouver, WA Publisher: U.S. Geological Survey Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: See Entity_Attribute_Information Quantitative_Attribute_Accuracy_Assessment: Attribute_Accuracy_Value: See Explaination Attribute_Accuracy_Explanation: The attribute accuracy is described, where present, with each attribute defined in the Entity and Attribute Section. Logical_Consistency_Report: Polygon and chain-node topology present. Hazard zonation polygons are logically consistent throughout coverage. Completeness_Report: This data set includes hazard zones that may be affected by lahars, pyroclastic flows, lava flows, and volcanic gases during future activity of Newberry Volcano and other volcanic vents in the area. Additionally, it shows drill holes made on the north and south flanks of Newberry Volcano that were used to estimate coverage of future lava flows. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Original linework and points were compiled on mylar greenlines of U.S. Geological Survey topographic quadrangles created according to National Map Accuracy Standards. Digitized linework was plotted, registered to original linework, and inspected visually for discrepency of greater than a linewidth (approximately 0.007 inches). For computer modelling, Digital Elevation Models having cell sizes of about 62 ground meters or about 2 millimeters on the map at 1:100,000 scale were derived from Digital Line Graph contour layers that were created according to National Map Accuracy Standards. All linework and points were plotted with DLG contour layers to check for positional accuracy as are reasonable according to geologic and hydrologic principles. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: 1:100,000 scale Digital Line Graph (DLG) contours have contour intervals of either 50 or 40 meters as well as Digital Elevation Models have vertical accuracies according to the National Map Accuracy Standards. All linework and points were plotted with DLG contour layers to check for positional accuracy as are reasonable according to geologic and hydrologic principles. Lineage: Process_Step: Process_Description: Linework and points were captured by hand digitizing. Digitizing procedures: Arcs and points were digitized in tablet inches from lines inked on 1:24,000 or 1:100,000 scale topographic mylar greenlines. Each quadrangle was registered to the digitizer and re-registered to ensure that tics could be relocated with an RMS equal to or less than 0.004. Lines were digitized using a NODESNAP CLOSEST .05 and a weed tolerance of 0. A second coverage was CREATEd from the first. In INFO, the tics were changed from inch coordinates to decimal degree coordinates and saved. The decimal degree coordinate coverage was converted to a UTM projection using: INPUT PROJECTION GEOGRAPHIC UNITS DD PARAMETERS OUTPUT PROJECTION UTM UNITS METERS ZONE 10 PARAMETERS END Each coverage in inches was TRANSFORMed to the empty UTM coverage ensuring the transformation RMS was equal or less than 0.004 inches. The individual coverages were edgematched and merged into a single coverage. Coverages were checked for digitizing accuracy both before and after merging by plotting linework at 1:24,000 or 1:100,000 scale as appropriate and overlain on original linework. Process_Date: Unknown Process_Step: Process_Description: Metadata imported. Source_Used_Citation_Abbreviation: C:\DOCUME~1\sdoelger\LOCALS~1\Temp\xml1A93.tmp Process_Step: Process_Description: Metadata imported. Source_Used_Citation_Abbreviation: E:\doelger\newberry_meta\newberry.xml Process_Step: Process_Description: Metadata imported. Source_Used_Citation_Abbreviation: E:\doelger\newberry_meta\metadata.xml Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Entity point Point_and_Vector_Object_Count: 3 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 4 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Complete chain Point_and_Vector_Object_Count: 30 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Label point Point_and_Vector_Object_Count: 11 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains Point_and_Vector_Object_Count: 11 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 4 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 10 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.999600 Longitude_of_Central_Meridian: -123.000000 Latitude_of_Projection_Origin: 0.000000 False_Easting: 500000.000000 False_Northing: 0.000000 Planar_Coordinate_Information: Coordinate_Representation: Abscissa_Resolution: 0.000128 Ordinate_Resolution: 0.000128 Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1927 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.400000 Denominator_of_Flattening_Ratio: 294.978698 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: nbwells.pat Entity_Type_Definition: Point Attribute Table Entity_Type_Definition_Source: Scientific interpretation, field mapping, and experience Attribute: Attribute_Label: FID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: AREA Attribute_Definition: Area of feature in internal units squared. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Area is always zero for point coverages. Values are automatically generated. Attribute: Attribute_Label: PERIMETER Attribute_Definition: Perimeter of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Perimeter is always zero for point coverages. Values are automatically generated. Attribute: Attribute_Label: NBWELLS# Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: NBWELLS-ID Attribute_Definition: User-defined feature number. Attribute_Definition_Source: ESRI Attribute: Attribute_Label: NAME Attribute_Definition: Indicates the name of each data point Attribute_Definition_Source: Scientific interpretation Attribute: Attribute_Label: ENTITY-TYPE Attribute_Definition: Indicates whether the data point is a well or flow vent Attribute_Definition_Source: Scientific interpretation Overview_Description: Entity_and_Attribute_Overview: NBWELLS.PAT - Point Attribute Table The attributes FID, Shape, AREA, PERIMETER, NBHAZ#, and NBHAZ-ID are created and maintained automatically for internal use by Arc/INFO software. ENTITY-TYPE is defined as having a width of 10, output of 10, and as a character value. The characters are words that simply note whether the data point is a well or a flow vent. NAME is defined as having a width of 10, an output of 10, and as having a character value. The characters are the names given to each data point by scientists. Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: nbhaz.aat Entity_Type_Definition: Arc Attribute Table Entity_Type_Definition_Source: Scientific interpretation, field mapping, and experience Attribute: Attribute_Label: FID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: FNODE# Attribute_Definition: Internal node number for the beginning of an arc (from-node). Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: TNODE# Attribute_Definition: Internal node number for the end of an arc (to-node). Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: LPOLY# Attribute_Definition: Internal node number for the left polygon. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: RPOLY# Attribute_Definition: Internal node number for the right polygon. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: LENGTH Attribute_Definition: Length of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: NBHAZ# Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: NBHAZ-ID Attribute_Definition: User-defined feature number. Attribute_Definition_Source: ESRI Attribute: Attribute_Label: DATA Attribute_Definition: arcs for all zones in the coverage Attribute_Definition_Source: Field mapping, experience, and interpretation Attribute: Attribute_Label: LCODE Attribute_Definition: Line code for drawing arcs of hazard zones LCODE is defined as having a with of 3, an output of 3, and an integer value. The attribute can have values from 0 - 99. Each value represents the arcs that delineate SPECIFIC hazard areas in and around Newberry Crater. 0 Shows three (proximal and distal) hazard zones around Newberry. The zone with the outermost boundary is a region that would be subject to lava flows from eruptions on the Newberry volcano flank and from other vents in the greater area. The inner and smaller zone is subject to explosive pyroclastic eruptions of small to moderate volume in or near the caldera. Hazards here may include tephra falls, pyroclastic flows/surges, ballistic projectiles, and lava flows. The zone that extends to the west of the zones mentioned above shows the hazard area for lahars and floods on Paulina Creek in the event of volcanically induced surges of water from Pualina Lake. 1 Shows the southernmost extent of the lahar hazard zone on the Paulina Prarie 2 Shows the western boundary of the lahar hazard zone on the Paulina Prarie (boundary is dashed on map). It should be noted that attribute values both 1 and 2 show boundaries inferred by scientists. It is possible that very large lahars or floods could extend beyond these boundares. Areas immediately outside the boundary lines should not necessarily be considered free of hazard. 99 Shows the hazard zone surrounding the crater that would be subject to volcanic gasses during periods of volcanic unrest and increased gas emission. Additionally, the value represents the area of the upper west flank where Paulina Canyon might not contain peak flows during an exceptionally large flood event. Attribute_Definition_Source: Field mapping, experience, and interpretation Detailed_Description: Entity_Type: Entity_Type_Label: nbhaz.pat Entity_Type_Definition: Polygon Attribute Table Entity_Type_Definition_Source: Field mapping, experience, and interpretation Attribute: Attribute_Label: FID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: AREA Attribute_Definition: Area of feature in internal units squared. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: PERIMETER Attribute_Definition: Perimeter of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: NBHAZ# Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: NBHAZ-ID Attribute_Definition: User-defined feature number. Attribute_Definition_Source: ESRI Attribute: Attribute_Label: PCODE Attribute_Definition: Polygon code for hazard zones Attribute_Definition_Source: Field mapping, experience, and interpretation Attribute: Attribute_Label: PATTERN Attribute_Definition: Attribute for drawing additional polygons Attribute_Definition_Source: Field mapping, experience, and interpretation Overview_Description: Entity_and_Attribute_Overview: NBHAZ.AAT - Arc Attribute Table The attributes FID, Shape, FNODE#, TNODE#, LPOLY#, RPOLY#, LENGTH, NBHAZ#, and NBHAZ-ID are created and maintained automatically for internal use by Arc/INFO software. DATA is defined as having a width of 30, an output of 30, and a character value. The attribute identifies the arcs that delineate ALL of the hazard zones created by scientists for Newberry Volcano and the surrounding region. LCODE is defined as having a with of 3, an output of 3, and an integer value. The attribute can have values from 0 - 99. Each value represents the arcs that delineate SPECIFIC hazard areas in and around Newberry Crater. 0 Shows three (proximal and distal) hazard zones around Newberry. The zone with the outermost boundary is a region that would be subject to lava flows from eruptions on the Newberry volcano flank and from other vents in the greater area. The inner and smaller zone is subject to explosive pyroclastic eruptions of small to moderate volume in or near the caldera. Hazards here may include tephra falls, pyroclastic flows/surges, ballistic projectiles, and lava flows. The zone that extends to the west of the zones mentioned above shows the hazard area for lahars and floods on Paulina Creek in the event of volcanically induced surges of water from Pualina Lake. 1 Shows the southernmost extent of the lahar hazard zone on the Paulina Prarie 2 Shows the western boundary of the lahar hazard zone on the Paulina Prarie (boundary is dashed on map). It should be noted that attribute values both 1 and 2 show boundaries inferred by scientists. It is possible that very large lahars or floods could extend beyond these boundares. Areas immediately outside the boundary lines should not necessarily be considered free of hazard. 99 Shows the hazard zone surrounding the crater that would be subject to volcanic gasses during periods of volcanic unrest and increased gas emission. Additionally, the value represents the area of the upper west flank where Paulina Canyon might not contain peak flows during an exceptionally large flood event. NBHAZ.PAT - Polygon Attribute Table The attributes FID, Shape, AREA, PERIMETER, NBHAZ#, AND NBHAZ-ID are created and maintained automatically for internal use by Arc/INFO software. PCODE is defined as having a width of 3, an output of 3, and an integer value. The values represent the different polygons of each hazard zone in the coverage (each Hazard zone is described above with the arc attribute table values). 1 Shows the proximal hazard area on the volcano which is the zone for explosive pyroclastic eruptions of small to moderate volume in or near the caldera. 3 Shows the hazard zone for lahars and floods on Paulina Creek 4 Shows the zone that is subject to lava flows from vents in the greater Newberry region. 5 Shows the remaining area in the coverage that includes parts of the lower flanks of Newberry volcano and the surrounding region that both have a low probability of future eruptions or being covered by lava. PATTERN is defined as having a width of 1, an output of 1, and an integer value. The attribute values identify two additional hazard polygons. 1 Shows the area of the upper west flank where Paulina Creek canyon might not contain peak flows during a large flood event. 2 Shows the zone for volcanic gases. Distribution_Information: Resource_Description: Downloadable Data Distribution_Liability: This dataset has not been approved for release or publication by the Director of the USGS. The USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Distribution of the database files assumes that all components of the database will be used together. Use of any one ArcInfo coverage outside the context of the other coverages is considered inappropriate or misuse. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Transfer_Size: 0.043 Metadata_Reference_Information: Metadata_Date: 20060815 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Cascade Volcano Observatory Contact_Person: CVO Staff Contact_Address: Address_Type: mailing and physical address Address: 1300 SE Cardinal Ct. Suite 100 City: Vancouver State_or_Province: WA Postal_Code: 98683 Contact_Voice_Telephone: 360-993-8900 Contact_Facsimile_Telephone: 360-993-8980 Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Profile_Name: ESRI Metadata Profile