Example 4
Example 4

This example shows the different types of lode deposits.  The background geology is classified according to TERRANE with only five units showing.

The following files were used to draw this view:
  \circum\shp\geol5m\rox5mte.asx
  \circum\shp\base\w_mask.asx
  \circum\shp\base\hydro.asx
  \circum\shp\depos\lodedep.bob

--------------------------------------------------
To reproduce this view, click the 'SurView' button to launch SurView to view these files. Then modify the display attributes to show only the five specific terrane units in the background as follows:

1. locate the 'Rox5mte.asx' Geology (Terrane) legend by re-arranging (dragging) the legend windows

2. right click on the 'Rox5mte.asx' Geology (Terrane) legend to display the legend configuration dialog box

3. click on the 'Subset...' button to display a dialog box containing a selection menu

4. select the units containing the rocks of interest (eg. Island arc terrane, Turbidite basin terrane, etc.)

5. click the 'Ok' button to close the 'Subset' dialog box

6. click the 'Ok' button to close the legend configuration dialog box and redraw the picture

--------------------------------------------------
To view the lode deposit symbol legend:
1. select Edit | Display Attributes from SurView's main menu to display a list of attributes for all of the files in the current File Display List

2. double-click on the 'point-scale factors' attribute for the 'lodedep.bob' file to display a dialog box for the scale factors and the symbols used for each deposit type

3. Note that SurView can not print this 'legend'

NOTE: You will not be able to save the changes you make during this SurView session (since the files are write-protected on the CD-ROM).