Metadata: Identification_Information: Citation: Citation_Information: Originator: Vedder, J.G. Originator: Stanley, R.G. Originator: Graham, S.E. Originator: Valin, Z.C. Publication_Date: 2001 Publication_Time: Title: Geologic map and digital database of the San Rafael Mtn. 7.5- minute Quadrangle, Santa Barbara County, California Edition: 1.0 Geospatial_Data_Presentation_Form: geologic map Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: USGS OFR 01-290 Publication_Information: Publication_Place: Menlo Park, CA Publisher: U.S. Geological Survey Other_Citation_Details: Online_Linkage: http://geopubs.wr.usgs.gov/open-file/of01-290 Description: Abstract: This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (srm_expl.txt, srm_expl.pdf), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:24,000 or smaller. Purpose: This database and accompanying plot files depict the distribution of geologic materials and structures at a regional (1:24,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, mineral and energy resources, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes. In addition, this map does not take the place of fault-rupture hazard zones designated by the California State Geologist (Hart and Bryant, 1997). Similarly, the database cannot be substituted for comprehensive maps that systematically identify and classify landslide hazards. Supplemental_Information: Procedures_Used: The databases in this report were compiled in ARC/INFO, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, California), with version 3.0 of the menu interface ALACARTE (Fitzgibbon and Wentworth, 1991, Fitzgibbon, 1991, Wentworth and Fitzgibbon, 1991). The files are COVERAGE (ARC/INFO vector data) format. Coverages are stored in uncompressed ARC export format (ARC/INFO version 8.0.2). ARC/INFO export files (files with the .e00 extension) can be converted into ARC/INFO coverages in ARC/INFO (see below) and can be read by some other Geographic Information Systems, such as MapInfo via ArcLink and ESRI's ArcView (version 1.0 for Windows 3.1 to 3.11 is available for free from ESRI's web site: http://www.esri.com). The digital compilation was done in version 7.2.1 of ARC/INFO with version 3.0 of the menu interface ALACARTE (Fitzgibbon and Wentworth, 1991, Fitzgibbon, 1991, Wentworth and Fitzgibbon, 1991). The geologic map information was digitized from stable originals of the geologic maps at 1:24,000 scale. The author manuscripts (pen on mylar) were scanned using a Altek monochrome scanner with a resolution of 800 dots per inch. The scanned images were vectorized and transformed from scanner coordinates to projection coordinates with digital tics placed by hand at quadrangle corners. The scanned lines were edited interactively by hand using ALACARTE, color boundaries were tagged as appropriate, and some scanning artifacts visible at 1:24,000 were removed. Reviews_Applied_to_Data: This report has undergone two scientific peer reviews, one digital database review, and review of the plotfiles for conformity with USGS map standards. Related_Spatial_and_Tabular_Data_Sets: This report consists of a set of geologic map database files (Arc/Info coverages) and supporting text and plotfiles. In addition, the report includes two sets of plotfiles (PostScript and PDF format) that will generate map sheets and pamphlets similar to a traditional USGS Open-File Report. These files are described in the explanatory pamphlets (srm.ps, srm.pdf, and srm.txt). The base map layers used in the preparation of the geologic map plotfiles were scanned from a scale-stable version of the USGS 1:24,000 topographic maps of the San Rafael Mtn. (1959, photorevised 1988) 7.5-minute quadrangle. The map has a 40 foot contour interval. Other_References_Cited: Other references cited are listed in the explanatory pamphlets (scvmf.ps, scvmf.pdf, and scvmf.txt) Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2001 Currentness_Reference: The date given is the publication date. The information in the report is the most up-to-date available at the time of publication. Status: Progress: Pre-Publication Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -119.8749999 East_Bounding_Coordinate: -119.74990599 North_Bounding_Coordinate: 34.74999996 South_Bounding_Coordinate: 34.62498399 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: geology Theme_Keyword: bedrock geology Theme_Keyword: surficial geology Theme_Keyword: geologic history Theme_Keyword: Franciscan complex Theme_Keyword: geologic structures Theme_Keyword: Big Pine fault Theme_Keyword: Hildreth fault Theme_Keyword: Little Pine fault Theme_Keyword: Mission Pine anticline Theme_Keyword: Hurricane Deck Syncline Theme_Keyword: Camuesa fault Theme_Keyword: geologic map Theme_Keyword: digital database Place: Place_Keyword_Thesaurus: None Place_Keyword: United States of America Place_Keyword: California Place_Keyword: Santa Barbara County Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: Landslide deposits Stratum_Keyword: Young alluvium Stratum_Keyword: Old alluvium Stratum_Keyword: Paso Robles(?) Formation Stratum_Keyword: Careaga Sandstone Stratum_Keyword: Unnamed sandstone intrusive into the Monterey Formation Stratum_Keyword: Unnamed intrusive and extrusive rocks Stratum_Keyword: Monterey Formation Stratum_Keyword: Hurricane Deck Formation of Thomas and others (1988) Stratum_Keyword: Unnamed mudstone Stratum_Keyword: Unnamed sandstone Stratum_Keyword: Vaqueros(?) Formation Stratum_Keyword: Simmler(?) Formation Stratum_Keyword: Mudstone and subordinate sandstone Stratum_Keyword: Sandstone and subordinate mudstone and conglomerate Stratum_Keyword: Mudstone and subordinate sandstone Stratum_Keyword: Sandstone, mudstone, and subordinate conglomerate Stratum_Keyword: Sandstone and subordinate mudstone Stratum_Keyword: Mudstone and subordinate sandstone Stratum_Keyword: Espada Formation of Dibblee (1950, 1966) Stratum_Keyword: Franciscan Complex Stratum_Keyword: Serpentinite Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: Mesozoic Temporal_Keyword: Jurassic Temporal_Keyword: Cretaceous Temporal_Keyword: Cenozoic Temporal_Keyword: Tertiary Temporal_Keyword: Paleocene Temporal_Keyword: Oligocene Temporal_Keyword: Miocene Temporal_Keyword: Pliocene Temporal_Keyword: Quaternary Temporal_Keyword: Pleistocene Temporal_Keyword: Holocene Access_Constraints: None Use_Constraints: Uses of this digital geologic map should not violate the spatial resolution of the data. Although the digital form of the data removes the constraint imposed by the scale of a paper map, the detail and accuracy inherent in map scale are also present in the digital data. The fact that this database was edited for a scale of 1:24,000 means that higher resolution information is not present in the dataset. Plotting at scales larger than 1:24,000 will not yield greater real detail, although it may reveal fine-scale irregularities below the intended resolution of the database. Similarly, where this database is used in combination with other data of higher resolution, the resolution of the combined output will be limited by the lower resolution of these data. This report is preliminary and has not been reviewed for conformity with the U.S. Geological Survey editorial standards. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Western Earth Surface Processes Team Contact_Person: Database coordinator Contact_Address: Address_Type: mailing address Address: 345 Middlefield Road, MS 975 City: Menlo Park State_or_Province: CA Postal_Code: 94025 Country: USA Browse_Graphic: Browse_Graphic_File_Name: Browse_Graphic_File_Description: Browse_Graphic_File_Type: Data_Set_Credit: Reconnaissance geologic mapping by H.E. Clifton, D.L. Durham, H.D. Gower, and J.G. Vedder, April-May 1965. Selective geologic mapping, including helicopter overflights, by Hugh McLean and J.G. Vedder, September 1980; September 1981. Detailed geologic mapping of Franciscan Complex by A.D. Wahl, 1990-1992. Detailed geologic mapping by R.G. Stanley and J.G. Vedder, September 1996; June, September, and October 1997. Detailed geologic mapping by R.G. Stanley, June, September, and October 1998. We thank the United States Department of Agriculture, U.S. Forest Service, for facilitating access to remote parts of the Los Padres National Forest, and the owners and employees of Rancho San Fernando Rey for providing access to private lands. We also thank R.E. Denison (University of Texas at Dallas) for providing a strontium isotopic age on shell material from the unnamed Miocene sandstone (unit Tss); Scott Graham, Zenon Valin, and Todd Fitzgibbon (U.S. Geological Survey, Menlo Park) for assisting with digital preparation of the map; Robert G. Bohannon (U.S. Geological Survey, Menlo Park) and Scott A. Minor (U.S. Geological Survey, Denver, CO) for technical reviews; and Paul Stone (U.S. Geological Survey, Menlo Park) for suggestions that improved the clarity of the map and accompanying materials. Security_Information: Security_Classification_System: None Security_Classification: Unclassified Security_Handling_Description: None Native_Data_Set_Environment: SunOS, 5.5.1, sun4u UNIX, ARC/INFO version 7.2.1 Cross_Reference: Citation_Information: Originator: Originator: Originator: Publication_Date: Title: Geospatial_Data_Presentation_Form: Series_Information Series_Name: Issue_Identification: Other_Citation_Details: Online_Linkage: Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: See Entity_Attribute_Information Quantitative_Attribute_Accuracy_Assessment: Attribute_Accuracy_Value: See Explanation Attribute_Accuracy_Explanation: Attribute accuracy is described, where present, with each attribute defined in the Entity and Attribute Section. Logical_Consistency_Report: Polygon and chain-node topology present Completeness_Report: The report is intended to describe completely the surficial deposits and bedrock geology at 1:24,000 scale. Geologic information only mappable at larger scale has been omitted. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Well located data items are intended to have a horizontal positional accuracy within .5 mm at 1:24,000 scale, or within 12 meters on the ground. The general positional accuracy of each line in the database is indicated within the LTYPE field in the Arc Attribute Table (see below). Points in the database are generally considered to be well located. The position of each data item is derived from the USGS topographic base map, and therefore additional inaccuracies arising from inaccuracies in the base map may also be encountered. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: No vertical positional data recorded. Lineage: See also Supplemental_Information: Source_Information: Source_Citation: Citation_Information: Originator: Publication_Date: Title: Series_Information: Series_Name: Issue_Identification: Source_Scale_Denominator: Type_Of_Source_Media: Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: Source_Currentness_Reference: Source_Citation_Abbreviation: Source_Contribution: Process_Step: Process_Description: Geologic linework was scanned, converted to vector data, and edited on-screen to repair errors visible at map scale. Polygon topology was created and each polygon tagged on-screen. Structural information was digitized by hand on-screen. Plotfiles were created in ArcPlot. Cloud_Cover: Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point SDTS_Point_and_Vector_Object_Type: String SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Map_Projection: Map_Projection_Name: Polyconic: Longitude_of_Central_Meridian: -119_ 48' 45" Latitude_of_Projection's_Origin: 34_ 37' 30" False_Easting: 0.0 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 1.0 Ordinate_Resolution: 1.0 Planar_Distance_Units: METERS Geodetic_Model: Horizontal_Datum_Name: NAD27 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.4 Denominator_of_Flattening_Ratio: 294.98 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: SRM_GEO.PAT Entity_Type_Definition: Attribute table of SRM_GEO.PAT. Entity_Type_Definition_Source: ARC/INFO Attribute: Attribute_Label: - Attribute_Definition: Attribute table of SRM_GEO.PAT. Attribute_Definition_Source: ARC/INFO Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: AREA Attribute_Definition: Area of poly/region in square coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Positive real numbers Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: PERIMETER Attribute_Definition: Perimeter of poly/region in coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Positive real numbers Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_GEO# Attribute_Definition: Internal feature number Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_GEO-ID Attribute_Definition: User-assigned feature number Attribute_Definition_Source: User-defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Integer Enumerated_Domain_Value_Definition: Set equal to SRM_GEO# Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: PTYPE Attribute_Definition: Geologic unit label Attribute_Definition_Source: author Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: KJe Enumerated_Domain_Value_Definition: Espada Formation of Dibblee, 1950 and 1966 Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: KJf Enumerated_Domain_Value_Definition: Franciscan Complex Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Km Enumerated_Domain_Value_Definition: Mudstone and subordinate sandstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Ks Enumerated_Domain_Value_Definition: Sandstone and subordinate mudstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Ksm Enumerated_Domain_Value_Definition: Mudstone and subordinate sandstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Kss Enumerated_Domain_Value_Definition: Sandstone and subordinate mudstone and conglomerate Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Ku Enumerated_Domain_Value_Definition: Sandstone, mudstone, and subordinate conglomerate Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: QTprf Enumerated_Domain_Value_Definition: Paso Robles(?) Formation Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qls Enumerated_Domain_Value_Definition: Landslide deposits Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa1 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa2 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa3 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa4 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa5 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qoa6 Enumerated_Domain_Value_Definition: Old alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Qya Enumerated_Domain_Value_Definition: Young alluvium Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: TKs Enumerated_Domain_Value_Definition: Mudstone and subordinate sandstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tca Enumerated_Domain_Value_Definition: Careaga Sandstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Th Enumerated_Domain_Value_Definition: Hurricane Deck Formation of Thomas and others (1988) Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Ti Enumerated_Domain_Value_Definition: Unnamed intrusive and extrusive rocks Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tm Enumerated_Domain_Value_Definition: Monterey Formation Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tmc Enumerated_Domain_Value_Definition: Unnamed mudstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Ts Enumerated_Domain_Value_Definition: Simmler(?) Formation Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tsi Enumerated_Domain_Value_Definition: Unnamed sandstone intrusive into the Monterey Formation Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tss Enumerated_Domain_Value_Definition: Unnamed sandstone Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: Tv Enumerated_Domain_Value_Definition: Vaqueros(?) Formation Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: sp Enumerated_Domain_Value_Definition: Serpentinite Enumerated_Domain_Value_Definition_Source: author Entity_Type: Entity_Type_Label: SRM_GEO.AAT Entity_Type_Definition: Attribute table of SRM_GEO. Entity_Type_Definition_Source: ARC/INFO Attribute: Attribute_Label: - Attribute_Definition: Attribute table of SRM_GEO. Attribute_Definition_Source: ARC/INFO Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: FNODE# Attribute_Definition: Internal number of from-node Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: TNODE# Attribute_Definition: Internal number of to-node Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: LPOLY# Attribute_Definition: Internal number of poly to left of arc Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: RPOLY# Attribute_Definition: Internal number of poly to right of arc Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: LENGTH Attribute_Definition: Length of arc in coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Positive real numbers Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_GEO# Attribute_Definition: Internal feature number Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_GEO-ID Attribute_Definition: User-assigned feature number Attribute_Definition_Source: User-defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Integer Enumerated_Domain_Value_Definition: Set equal to SRM_GEO# Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: LTYPE Attribute_Definition: Type of geologic or geographic feature denoted by a line in the database. Attribute_Definition_Source: author Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: contact, approx. located Enumerated_Domain_Value_Definition: Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:24,000) or within about 48 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: contact, certain Enumerated_Domain_Value_Definition: Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: contact, inferred Enumerated_Domain_Value_Definition: Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. The existence of the contact is inferred from structural and stratigraphic relationships observed elsewhere. Enumerated_Domain: Enumerated_Domain_Value: fault, approx. located Enumerated_Domain_Value_Definition: Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:24,000) or within about 48 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: fault, certain Enumerated_Domain_Value_Definition: Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: fault, concealed Enumerated_Domain_Value_Definition: Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: fault, inferred Enumerated_Domain_Value_Definition: Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: map boundary Enumerated_Domain_Value_Definition: Edge of the mapped area. Used primarily to bound polygons at the edge of the map database. The location of the boundary is well located as described in Positional_Accuracy. Enumerated_Domain_Value_Definition_Source: author Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: SRM_STR.PAT Entity_Type_Definition: Attribute table of SRM_STR. Entity_Type_Definition_Source: ARC/INFO Attribute: Attribute_Label: - Attribute_Definition: Attribute table of SRM_STR. Attribute_Definition_Source: ARC/INFO Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: AREA Attribute_Definition: Degenerate area of point Attribute_Definition_Source: Assigned Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 0 Enumerated_Domain_Value_Definition: No area for points Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: PERIMETER Attribute_Definition: Degenerate perimeter of point Attribute_Definition_Source: Assigned Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 0 Enumerated_Domain_Value_Definition: No perimeter for points Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: SRM_STR# Attribute_Definition: Internal feature number Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_STR-ID Attribute_Definition: User-assigned feature number Attribute_Definition_Source: User-defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Integer Enumerated_Domain_Value_Definition: Calculated to equal SRM_STR# Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: PTTYPE Attribute_Definition: The type of planar feature which was observed and the orientation of which was measured at this point. Attribute_Definition_Source: author Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: apparent dip of beds Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The true strike and dip of the layers could not be ascertained. The angle between the layers and the horizontal was measured by a geologist standing at an observation point that may or may not have been located along the strike of bedding. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: bedding estimated from afar Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were measured by a geologist standing more than about 12 m from this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: bedding estimated from airphoto Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were estimated by a geologist using aerial photographs. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: bedding measured on ground Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were measured by a geologist standing on the ground at this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: flat bedding Enumerated_Domain_Value_Definition: Horizontal sedimentary layers were observed at this point, either on the ground or on aerial photographs. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: ot bedding estimated from afar Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were measured by a geologist standing more than about 12 m from this point. In addition, sedimentary structures or other features were observed at or near this point that showed the layers were overturned. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: ot bedding estimated from airphoto Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were estimated by a geologist using aerial photographs. In addition, sedimentary structures or other features were observed at or near this point that showed the layers were overturned. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: ot bedding measured on ground Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. The strike and dip of these layers were measured by a geologist standing on the ground at this point. In addition, sedimentary structures or other features were observed at or near this point that showed the layers were overturned. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: vert bedding est. from airphoto Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. These layers are now vertical. The strike of these layers was estimated by a geologist using aerial photographs. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: vert bedding estimated from afar Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. These layers are now vertical. The strike of these layers was measured by a geologist standing more than about 12 m from this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: vert bedding measured on ground Enumerated_Domain_Value_Definition: Originally horizontal sedimentary layers were observed at this point. These layers are now vertical. The strike of these layers was measured by a geologist standing on the ground at this point. Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: DIP Attribute_Definition: The inclination of planar structures measured in degrees down from horizontal. Attribute_Definition_Source: author Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 90 Attribute_Units_of_Measure: degrees Attribute_Measurement_Resolution: 1 Attribute: Attribute_Label: STRIKE Attribute_Definition: The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north. Attribute_Definition_Source: author Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 359 Attribute_Units_of_Measure: degrees Attribute_Measurement_Resolution: 1 Entity_Type: Entity_Type_Label: SRM_STR.AAT Entity_Type_Definition: Attribute table of SRM_STR. Entity_Type_Definition_Source: ARC/INFO Attribute: Attribute_Label: - Attribute_Definition: Attribute table of SRM_STR. Attribute_Definition_Source: ARC/INFO Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: FNODE# Attribute_Definition: Internal number of from-node Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: TNODE# Attribute_Definition: Internal number of to-node Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: LPOLY# Attribute_Definition: Internal number of poly to left of arc Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: RPOLY# Attribute_Definition: Internal number of poly to right of arc Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: LENGTH Attribute_Definition: Length of arc in coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Positive real numbers Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_STR# Attribute_Definition: Internal feature number Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sequential unique positive integer Enumerated_Domain_Value_Definition: Enumerated_Domain_Value_Definition_Source: Attribute: Attribute_Label: SRM_STR-ID Attribute_Definition: User-assigned feature number Attribute_Definition_Source: User-defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Integer Enumerated_Domain_Value_Definition: Calculated to equal SRM_STR# Enumerated_Domain_Value_Definition_Source: author Attribute: Attribute_Label: LTYPE Attribute_Definition: The type of fold axis or other structural linear feature that does not bound geologic units. Faults and contacts are described in a separate coverage. Attribute_Definition_Source: author Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: f.a., anticline, approx. located Enumerated_Domain_Value_Definition: The surface trace of the axis of an anticline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., anticline, certain Enumerated_Domain_Value_Definition: The surface trace of the axis of an anticline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., anticline, concealed Enumerated_Domain_Value_Definition: The surface trace of the axis of an anticline. The axis is obscured by overlying mapped units, so it is not well located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., anticline, inferred Enumerated_Domain_Value_Definition: The surface trace of the axis of an anticline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. The existence of the fold is inferred from structural and stratigraphic relationships observed elsewhere. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., ot anticline, approx. located Enumerated_Domain_Value_Definition: The surface trace of the axis of an anticline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:24,000) or within about 48 meters on the ground. Evidence that the anticline is overturned was observed, although that observation may not have been made at this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., ot syncline, approx. located Enumerated_Domain_Value_Definition: The surface trace of the axis of an syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:24,000) or within about 48 meters on the ground. Evidence that the syncline is overturned was observed, although that observation may not have been made at this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., ot syncline, certain Enumerated_Domain_Value_Definition: The surface trace of the axis of a syncline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Evidence that the syncline is overturned was observed, although that observation may not have been made at this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., ot syncline, inferred Enumerated_Domain_Value_Definition: The surface trace of the axis of an syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Evidence that the syncline is overturned was observed, although that observation may not have been made at this point. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., syncline, approx. located Enumerated_Domain_Value_Definition: The surface trace of the axis of a syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:24,000) or within about 48 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., syncline, certain Enumerated_Domain_Value_Definition: The surface trace of the axis of a syncline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., syncline, concealed Enumerated_Domain_Value_Definition: The surface trace of the axis of a syncline. The axis is obscured by overlying mapped units, so it is not well located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Enumerated_Domain: Enumerated_Domain_Value: f.a., syncline, inferred Enumerated_Domain_Value_Definition: The surface trace of the axis of a syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:24,000) or within about 120 meters on the ground. Enumerated_Domain_Value_Definition_Source: author Overview_Description: Entity_and_Attribute_Overview: The databases in this report were compiled in ARC/INFO, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, California). Almost all the attributes in the various attribute tables of the coverages included in the report are set or calculated by Arc/Info. The exceptions are "coveragename"-ID, LTYPE, PTYPE, PTTYPE, STRIKE, and DIP. "coveragename"-ID is required by internal policy to be sequential. This ensures the highest compatibility of our databases with other GISs. Therefore "coveragename"-ID is calculated equal to "coveragename"#, which is a unique, sequential integer assigned by Arc/Info to each data record. LTYPE, PTYPE, and PTTYPE are author added items to the coverage AAT or PAT that are used to describe the type of line (LTYPE), area (PTYPE), or point (PTTYPE) being recorded. All coverages with AAT and PAT present include these items in the data structure. Each has WIDTH 35, OUTPUT 35, TYPE C. STRIKE and DIP are author added items to the coverage PAT that record information about the orientation of planar geologic structures. Both have WIDTH 3, OUTPUT 3, TYPE I. These items are recorded in the tables SRM-STR.PAT of the structure coverage. The base map layers are included for visual reference only and contain no data attributes or attribute tables. Entity_and_Attribute_Detail_Citation: This report combined with the explanatory pamphlet: srm_expl.txt and srm_expl.pdf Distribution_Information: Distributor: U.S. Geological Survey Contact_Information: Digital Form Contact_Person_Primary: Contact_Person: Database Coordinator Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing address Address: 345 Middlefield Rd., M/S 975 City: Menlo Park State_or_Province: CA Postal_Code: 94025 Country: USA Digital_Transfer_Option Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://geopubs.wr.usgs.gov/open-file/of01-290 Offline_Option: Send a request with an Exabyte tape to the Database Coordinator via the contact information given above. Offline_Media: 8 mm Exabyte tape Recording_Capacity: 2.3 GB or 5.0 GB Recording_Format: TAR file compressed with gzip Compatibility_Information: Distribution_Liability: The U.S. Geological Survey (USGS) provides these geographic data "as is." The USGS makes no guarantee or warranty concerning the accuracy of information contained in the geographic data. The USGS further makes no warranties, either expressed or implied as to any other matter whatsoever, including, without limitation, the condition of the product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user. Although these data have been processed successfully on computers at the USGS, no warranty, expressed or implied, is made by the USGS regarding the use of these data on any other system, nor does the fact of distribution constitute or imply any such warranty. In no event shall the USGS have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of use of or reliance on the geographic data or arising out of the delivery, installation, operation, or support by USGS. This digital, geologic map database of the San Rafael Mtn. 7.5'quadrangle, 1:24,000 map-scale, and any derivative maps thereof, is not meant to be used or displayed at any scale larger than 1:24,000 (e.g., 1:12,000). Metadata_Reference_Information: Metadata_Date: 20011011 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Richard G. Stanley Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: Mailing Address: 345 Middlefield Rd., M/S 969 City: Menlo Park State_or_Province: CA Postal_Code: 94025 Country: USA Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: 19940608 Metadata_Time_Convention: Local Time Metadata_Security_Information: Metadata_Security_Classification_System: None Metadata_Security_Classification: Unclassified Metadata_Security_Handling_Description: None