Point Shapefile with a Point Every 100 meters Along the Neuse River 2005 Resistivity Survey Tracklines

Metadata also available as - [Outline] - [Parseable text]

Frequently-anticipated questions:

What does this data set describe?

Title:
Point Shapefile with a Point Every 100 meters Along the Neuse River 2005 Resistivity Survey Tracklines
Abstract:
The Neuse River Estuary in North Carolina is a broad, V-shaped water body located on the southwestern end of Pamlico Sound. This estuary suffers from severe eutrophication for which several water quality models have recently been developed to aid in the management of nutrient loading to the estuary. In an effort to help constrain model estimates of the fraction of nutrients delivered by direct ground-water discharge, continuous resistivity profile (CRP) measurements were made during the spring of 2004 and 2005. CRP is used to measure electrical resistivity of sediments, a property that is sensitive to difference in salinity of submarine ground water. The 2004 and 2005 surveys used floating resistivity streamers of 100 m and 50 m respectively. The depth penetration of the streamers is approximately 20% of the streamer length which translates to approximately 20-25 m with the 100 m streamer and 12-14 m with the 50 m streamer. These data were processed using AGI's EarthImager 2D software. CRP data enables the mapping of the extent and depth of the fresher ground water within the estuary.
  1. How should this data set be cited?

    Cross, VeeAnn A. , 2005, Point Shapefile with a Point Every 100 meters Along the Neuse River 2005 Resistivity Survey Tracklines:.

    Online Links:

    This is part of the following larger work.

    Cross, VeeAnn A. , Bratton, John F. , Bergeron, Emile, Meunier, Jeff K. , Crusius, John, and Koopmans, Dirk, 2005, Continuous Resistivity Profiling Data from the Upper Neuse River Estuary, North Carolina, 2004-2005: Open-File Report 2005-1306, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -77.033727
    East_Bounding_Coordinate: -76.812014
    North_Bounding_Coordinate: 35.124350
    South_Bounding_Coordinate: 34.936800

  3. What does it look like?

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 03-May-2005
    Ending_Date: 05-May-2005
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: vector digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Vector data set. It contains the following vector data types (SDTS terminology):

      • Entity point (974)

    2. What coordinate system is used to represent geographic features?

      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000000. Longitudes are given to the nearest 0.000000. Latitude and longitude values are specified in Decimal degrees.

      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257222.

  7. How does the data set describe geographic features?

    res_100mpnts_05

    FID
    Internal feature number. (Source: ESRI)

    Sequential unique whole numbers that are automatically generated.

    Shape
    Feature geometry. (Source: ESRI)

    Coordinates defining the features.

    ID
    Unique number assigned to each point when the shapefile was created. (Source: Software generated.)

    Range of values
    Minimum:1
    Maximum:974

    DIST
    Distance from the beginning of the line in meters. (Source: Software defined.)

    Range of values
    Minimum:0
    Maximum:33600
    Units:meters

    LINENAME
    String indicating the resistivity line that the point belongs to. (Source: Software generated.)

    character set

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    John F. Bratton
    U.S. Geological Survey
    384 Woods Hole Rd.
    Woods Hole, MA 02543-1598

    (508) 548-8700 x2254 (voice)
    (508) 457-2310 (FAX)

Why was the data set created?

This ArcView shapefile is used to provide the correlation between the resistivity profiles and their location with the Neuse River.

How was the data set created?

  1. From what previous works were the data drawn?

    (source 1 of 1)
    Source_Contribution:
    These data were acquired with an AGI SuperSting Marine system that is described at the website: www.agiusa.com/marinesystem.shtml. The particular system used for this acquisition was an 11 electrode array with electrodes spaced 5 meters apart. The potential electrodes are made of graphite, with the remaining electrodes stainless steel. A dipole-dipole configuration was used for the data collection in which two fixed current electrodes are assigned with the measurement of voltage potentials between electrode pairs in the remaining electrodes. Each line of data acquisition records several files. The two files necessary for processing are the *.stg and *.gps file. The STG file contains the resistivity data, while the GPS file contains the navigation information.

  2. How were the data generated, processed, and modified?

    (process 1 of 1)
    The avenue script (VAC_pntsfromline.ave) was run on the restracklines_05 shapefile to generate a point every 100m along the trackline. This process was done prior to any of the polylines being split to reflect processed sections of the resistivity data.

    Data sources used in this process:

    • restracklines_05.shp

    Data sources produced in this process:

    • res_100mpnts_05.shp

  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

  5. How consistent are the relationships among the observations, including topology?

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None.
Use_Constraints:
The U.S. Geological Survey must be referenced as the originator of the dataset in any future products or research derived from these data.

  1. Who distributes the data set? (Distributor 1 of 1)

    John F. Bratton
    U.S. Geological Survey
    384 Woods Hole Rd.
    Woods Hole, MA 02543-1598

    (508) 548-8700 x2254 (voice)
    (508) 457-2310 (FAX)

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    These data were prepared by an agency of the United States Government. Neither the United States government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof. Although all data published in this report have been used by the USGS, no warranty, expressed or implied, is made by the USGS as to the accuracy of the data and related materials and/or the functioning of the software. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of this data, software, or related materials.

  4. How can I download or order the data?

Who wrote the metadata?

Dates:
Last modified: 01-Nov-2005
Metadata author:
VeeAnn A. Cross
U.S. Geological Survey
Marine Geologist
384 Woods Hole Rd.
Woods Hole, MA 02543-1598

(508) 548-8700 x2251 (voice)
(508) 457-2310 (FAX)
vatnipp@usgs.gov

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
Metadata extensions used:

Generated by mp version 2.8.6 on Tue Nov 01 14:50:33 2005