bh_2mmbbath: Multibeam Bathymetry 2 meter/pixel of Boston Harbor and Approaches | |
Data format: Raster Dataset - ESRI GRID File or table name: bh_2mmbbath Coordinate system: Universal Transverse Mercator Theme keywords: U.S. Geological Survey, USGS, Coastal and Marine Geology Program, CMGP, Woods Hole Science Center, WHSC, Massachusetts Office of Coastal Zone Management, CZM, Seafloor, Marine Geology, ArcGIS Raster, Sidescan, Sidescan Sonar, Edgetech, 272-T, Klein, 5500, National Oceanic and Atmospheric Administration, NOAA, National Ocean Service, NOS, NOAA Ship Whiting, Hydrographic Survey, oceans and estuaries, elevation, imageryBaseMapsEarthCover |
|
Abstract:
These data are high-resolution bathymetric measurements of the seafloor from Boston Harbor and the harbor approaches, Massachusetts. Approximately 170 km² of sidescan sonar and bathymetric data were collected by the National Oceanic and Atmospheric Administration (NOAA) Ship Whiting in 2000 and 2001 and reprocessed and gridded by the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS). |
Metadata elements shown with blue text are defined in the Federal Geographic Data Committee's (FGDC) Content Standard for Digital Geospatial Metadata (CSDGM). Elements shown with green text are defined in the ESRI Profile of the CSDGM. Elements shown with a green asterisk (*) will be automatically updated by ArcCatalog. ArcCatalog adds hints indicating which FGDC elements are mandatory; these are shown with gray text.
These data are high-resolution bathymetric measurements of the seafloor from Boston Harbor and the harbor approaches, Massachusetts. Approximately 170 km² of sidescan sonar and bathymetric data were collected by the National Oceanic and Atmospheric Administration (NOAA) Ship Whiting in 2000 and 2001 and reprocessed and gridded by the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS).
These data were collected by the National Oceanic and Atmospheric Administration (NOAA) National Ocean Service (NOS) branch as part of their periodic hydrographic mapping for nautical charting. The raw datasets were provided by NOAA to the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS) in Woods Hole, MA as part of a cooperative agreement to provide high resolution bathymetry and backscatter intensity maps and digital GIS information for resource management, scientific research, industry and the public.
ground condition
Data are not intended for navigational use. These data should not be used at resolutions for which it is not intended. Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey (USGS) as the source of this information.
384 Woods Hole Rd.
These data have not been quantitatively compared to previous hydrographic data, although they generally agree with qualitative comparison of published NOAA charts.
All of the NOAA survey vessels were equipped with Trimble DSM212L Differential Global Positioning System (DGPS) receivers. Launch 1005, which collected all of the multibeam bathymetry, was also equipped with a TSS POS/MV Model 320 (Position and Orientation System for Marine Vessels). Standard bathymetric processing, including tide corrections, soundings accuracy, and quality control were done by the NOAA Office of Coast Survey.
Tidal datum for this project is Mean Lower Low Water (MLLW). The tide station at Boston, MA (844-3970) was the control for the vertical datum.
The original geophysical data for this project were collected during four hydrographic surveys conducted by NOAA NOS in 2000 and 2001 on the NOAA Ship Whiting and its launches 1005/1014. Multibeam bathymetric data were acquired with a Reson SeaBat 8101 and sidescan sonar backscatter data were acquired with Edgetech model 272-T (100 kHz) or the Klein T-5500 (455 kHz) sonar systems.
A hull-mounted Reson SeaBat 8101 acquired the shallow-water multibeam data for all four surveys. The Reson 8101 was operated at a frequency of 240 kHz and a maximum speed of 6 knots. The system is designed for operation in water depths of 5 to 125 m, and has a horizontal range of 75 to 500 m that depends on water depth. Each time the system fires or "pings", it collects 101 individual soundings in a swath oriented perpendicular to the vessel track. Acquisition was monitored in real time with the ISIS software (version 5.29) and recorded to XTF format. NOAA Office of Coast Survey converted the XTF data to Caris HDCS (Hydrographic Data Cleaning System) format, then processed and tide-corrected the data with Caris HIPS (Hydrographic Information Processing System) software. The Caris HIPS database was transfered to the USGS/CZM in 2004 for use in this project.
Tide-corrected multibeam soundings were exported from Caris HIPS at a 2-meter grid interval for each of the survey areas and reformatted for input into the Swathed processing software (University of New Brunswick Ocean Mapping Group). The soundings were gridded using the “weigh_grid” routine creating 2-meter bathymetry grids. The OMG grid format (.r4) was converted to ASCII raster format.
c/o U.S. Geological Survey
384 Woods Hole Rd.
The ASCII raster format files were each imported to ArcGIS 9.0 using ArcToolbox ("Ascii to Raster") and then merged to create a master grid of multibeam bathymetry.
c/o U.S. Geological Survey
384 Woods Hole Rd.
Internal feature number.
ESRI
c/o U.S. Geological Survey
384 Woods Hole Rd.
Although this data set has been used by the U.S. Geological Survey (USGS), no warranty, expressed or implied, is made by the USGS as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
ESRI Grid
c/o U.S. Geological Survey
384 Woods Hole Rd.