Enhanced TIFF Sidescan-Sonar Mosaic of Overton Arm - Lake Mead, Nevada: Geographic Coordinates

Metadata also available as - [Outline] - [Parseable text]

Frequently-anticipated questions:

What does this data set describe?

Title:
Enhanced TIFF Sidescan-Sonar Mosaic of Overton Arm - Lake Mead, Nevada: Geographic Coordinates
Abstract:
Lake Mead is a large interstate reservoir located in the Mojave Desert of southeastern Nevada and northwestern Arizona. It was impounded in 1935 by the construction of Hoover Dam and is one of a series of multi-purpose reservoirs on the Colorado River. The lake extends 183 km from the mouth of the Grand Canyon to Black Canyon, the site of Hoover Dam, and provides water for residential, commercial, industrial, recreational, and other non-agricultural users in communities across the southwestern United States. Extensive research has been conducted on Lake Mead, but a majority of the studies have involved determining levels of anthropogenic contaminants such as synthetic organic compounds, heavy metals and dissolved ions, furans/dioxins, and nutrient loading in lake water, sediment, and biota (Preissler, et al., 1998; Bevans et al, 1996; Bevans et al., 1998; Covay and Leiker, 1998; LaBounty and Horn, 1997; Paulson, 1981). By contrast, little work has focused on the sediments in the lake and the processes of deposition (Gould, 1951). To address these questions, sidescan-sonar imagery and high-resolution seismic-reflection profiles were collected throughout Lake Mead by the USGS in cooperation with researchers from University of Nevada Las Vegas (UNLV). These data allow a detailed mapping of the surficial geology and the distribution and thickness of sediment that has accumulated in the lake since the completion of Hoover Dam. Results indicate that the accumulation of post-impoundment sediment is primarily restricted to former river and stream beds that are now submerged below the lake while the margins of the lake appear to be devoid of post-impoundment sediment. The sediment cover along the original Colorado River bed is continuous and is typically greater than 10 m thick through much of its length. Sediment thickness in some areas exceeds 35 m while the smaller tributary valleys typically are filled with less than 4 m of sediment. Away from the river beds that are now covered with post-impoundment sediment, pre-impoundment alluvial deposits and rock outcrops are still exposed on the lake floor.
Supplemental_Information:
This previously published dataset is provided as a courtesy in Open-File Report 1150 "Surficial Geology of the Floor of Lake Mead (Arizona and Nevada) as Defined by Sidescan-sonar Imagery, Lake Floor Topography and Post-impoundment Sediment Thickness", available online: <https://pubs.usgs.gov/of/2009/1150/>. Improvements have been made to this metadata file even though the originally published data have not been modified.
  1. How should this data set be cited?

    Twichell, David C. , and Cross, VeeAnn A. , 2003, Enhanced TIFF Sidescan-Sonar Mosaic of Overton Arm - Lake Mead, Nevada: Geographic Coordinates:.

    Online Links:

    This is part of the following larger work.

    Twichell, David C. , Cross, VeeAnn A. , and Belew, Stephen D. , 2003, Mapping the floor of Lake Mead (Nevada and Arizona): Preliminary discussion and GIS data release: Open-File Report 03-320, U.S. Geological Survey, Woods Hole Field Center, Woods Hole, MA.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -114.452408
    East_Bounding_Coordinate: -114.318663
    North_Bounding_Coordinate: 36.489514
    South_Bounding_Coordinate: 36.152868

  3. What does it look like?

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 01-Apr-2001
    Ending_Date: 26-Apr-2001
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: remote-sensing image

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 18677 x 6003 x 1, type Pixel

    2. What coordinate system is used to represent geographic features?

      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000018. Longitudes are given to the nearest 0.000022. Latitude and longitude values are specified in Decimal degrees.

      The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.

  7. How does the data set describe geographic features?

    Entity_and_Attribute_Overview:
    The pixel value represents the DN return value of the sidescan-sonar system. A high value (ie 254) indicates a highly reflective lake floor surface, while a low value (ie 0) indicates low reflectance.

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    David C. Twichell
    U.S. Geological Survey
    Oceanographer
    384 Woods Hole Rd.
    Woods Hole, MA 02543-1598

    (508) 548-8700 x2266 (voice)
    (508) 457-2310 (FAX)
    dtwichell@usgs.gov

Why was the data set created?

This sidescan-sonar imagery is used to map the morphology of the lake floor and determine the extent of sediment distribution on the lake floor.

How was the data set created?

  1. From what previous works were the data drawn?

  2. How were the data generated, processed, and modified?

    (process 1 of 8)
    Sidescan sonar imagery was collected using a Datasonics SIS-1000 sidescan sonar system and logged to a Triton QMIPS data logging computer.

    (process 2 of 8)
    The digital sidescan data were then processed and mapped to provide proper geographic locations of features identified in the imagery. The processing steps included subsampling the raw sidescan data using a median filtering routine to suppress speckle noise and reduce file size, and correct for slant-range distortion, signal attenuation, and dropped sonar lines using XSonar (Danforth et al., 1991). After these processing steps, the imagery was mapped into its proper geographic location using techniques summarized by Paskevich (1996). Individual sidescan swaths were mapped with each pixel geographically positioned at a resolution of 2 m/pixel. Due to the difficult nature of working in a lake environment, XSonar was modified by Danforth to incorporate the ability to exclude portions of the imagery from the beam angle correction routine. This enabled the stark contrast between highly reflection rock outcrops and fine-grained sediment deposits to be preserved. This enhancement was not available in 2001 when the data were collected, so the data were reprocessed in 2001. Processing the data up to this point was done be VeeAnn Cross.

    Data sources used in this process:

    • Danforth, W.W., O'Brien, T.F., and Schwab, W.C., 1991, USGS image processing system: near real-time mosaicking of high-resolution sidescan-sonar data: Sea Technology, Jan., 1991, p. 54-59.
    • Paskevich, V.F., 1996, MAPIT: An improved method for mapping digital sidescan sonar data using the Woods Hole Image Processing System (WHIPS) software: U.S. Geological Survey Open-File Report 96-281, 73p.

    (process 3 of 8)
    Non-overlapping swaths were then brought into the remote sensing software package PCI. The techniques for generating the composite digital sidescan mosaic are summarized by Paskevich (1992). Processing of the data from this point on was done by David C. Twichell.

    Data sources used in this process:

    • Paskevich, V.F., 1992, Digital mapping of sidescan sonar data with the Woods Hole Image Processing System software: U.S. Geological Survey Open-File Report 92-536, 87p.

    (process 4 of 8)
    Because of the close relationship of the imagery to the topography of the lake, a shaded-relief image generated from the DEM with the 10m contours burned into it was imported to PCI and the sidescan-sonar image strips were georeferenced to it. Misalignments based on the ground control points that were selected between the sidescan-sonar imagery and the DEM after georeferencing were less than 20m in all areas of the lake except a small section of Black Canyon and part of Boulder Canyon.

    (process 5 of 8)
    The mosaic then had a linear stretch applied to the data to reduce the valid data range from 0-255 to 0-254. When mapped on a white background, the background can be made transparent in the GIS without affecting the data.

    (process 6 of 8)
    Once the mosaics were completed, noise and areas of no data were trimmed from the fringes of the completed mosaic. The lake shoreline as defined by the U.S. Bureau of Reclamation was used to trim noise and nodata areas that fell beyond the limits of the lake.

    (process 7 of 8)
    A root stretch was applied in PCI to the sidescan image to help enhance the features. The root stretch was from 15-220 with resulting values between 0 and 254. This was done so that the white background (255) could be made transparent in the GIS.

    (process 8 of 8)
    The UTM projected image was the reprojected to Geographic coordinates using BlueMarble's Geographic Transformer software. Transform parameters used a resolution of 2m/pixel and a central latitude of 36N.

  3. What similar or related data should the user be aware of?

    Bevans, H.E., Goodbred, S.L., Miesner, J.F., Watkins, S.A., Gross, T.S., Denslow, N.D., and Choeb, T., 1996, Synthetic organic compounds and carp endocrinology and histology, Las Vegas Wash and Las Vegas and Callville bays of Lake Mead Nevada: Water-Resources Investigations 96-4266, U.S. Geological Survey.

    Bevans, H.E., Lico, M.S., and Lawrence, S.J., 1998, Water quality in the Las Vegas Valley area and the Carson and Truckee River basins, Nevada and California, 1992-1996: Circular 1170, U.S. Geological Survey.

    Couvay, K.J., and Leiker, T.J., 1998, Synthetic organic compounds in water and bottom sediment from streams, detention basins, and sewage-treatment plant outfalls in Las Vegas Valley, Nevada, 1997: Open-File Report 98-633, U.S. Geological Survey.

    Gould, H.R., 1951, Some quantitative aspects of Lake Mead turbidity currents: SEPM Special Publication No. 2, Society of Economic Paleontologists and Mineralogists.

    LaBounty, J.F., and Horn, M.J., 1997, The influence of drainage from the Las Vegas Valley on the limnology of Boulder Basin, Lake Mead, Arizona-Nevada: Journal of Lake and Reservoir Management v. 13.

    Paulson, L.J., 1981, Nutrient management with hydroelectric dams on the Colorado River: Technical Report #8, Lake Mead Limnological Research Center, Department of Biological Sciences, University of Nevada, Las Vegas, Nevada.

    Preissler, A.M., Roach, G.A., Thomas, K.A., and Wilson, J.W., 1998, Water resources data, Nevada, water year 1998: Water Resources Data Nevada NV-98-1, U.S. Geological Survey.

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

    The ship was navigated with P-CODE GPS. The towfish was deployed at approximately the same depth each day, with little variation during the course of the survey. Therefore range to fish values are assumed consistent and accurate.

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

    All imagery necessary to map the lake floor was used.

  5. How consistent are the relationships among the observations, including topology?

    All these data were collected with the same sidescan-sonar towfish. The majority of the data comprising this mosaic was acquired at a 1500m total swath width. In some small areas, data gaps were filled with data collected at a 750m total swath width. However, in each case, the data were resampled to a 2 m pixel size.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: NONE
Use_Constraints:
The U.S. Geological Survey must be referenced as the originator of the dataset in any future products or research derived from these data.

  1. Who distributes the data set? (Distributor 1 of 1)

    David C. Twichell
    U.S. Geological Survey
    Oceanographer
    384 Woods Hole Rd.
    Woods Hole, MA 02543-1598

    (508) 548-8700 x2266 (voice)
    (508) 457-2310 (FAX)
    dtwichell@usgs.gov

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  4. How can I download or order the data?

  5. What hardware or software do I need in order to use the data set?

    The user must be capable of uncompressing the WinZip file. In addition, to view the TIFF image spatially, the user must have software that is capable of reading the GeoTIFF header information, or alternatively, read the TIFF world file spatial reference information.

Who wrote the metadata?

Dates:
Last modified: 04-Aug-2009
Metadata author:
VeeAnn A. Cross
U.S. Geological Survey
Marine Geologist
384 Woods Hole Rd.
Woods Hole, MA 02543-1598

(508) 548-8700 x2251 (voice)
(508) 457-2310 (FAX)
vatnipp@usgs.gov

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
Metadata extensions used:

Generated by mp version 2.9.6 on Tue Aug 04 15:07:12 2009