Identification_Information: Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 2010 Title: MVILLE_05M: Bathymetric data, stored as elevation above IGLD85, collected by the U.S. Geological Survey within the St. Clair River offshore of Marysville, Michigan, 2008 (ESRI GRID) Edition: 1.0 Geospatial_Data_Presentation_Form: raster digital data Series_Information: Series_Name: Open-File Report Issue_Identification: 2010-1035 Publication_Information: Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA Publisher: U.S. Geological Survey, Coastal and Marine Geology Program Online_Linkage: http://pubs.usgs.gov/of/2010/1035/gis_catalog/bathymetry/mville_05m.zip Online_Linkage: http://pubs.usgs.gov/of/2010/1035/html/gis.html Larger_Work_Citation: Citation_Information: Originator: Jane F. Denny Originator: David S. Foster Originator: Charles R. Worley Originator: Barry J. Irwin Publication_Date: 2010 Title: Geophysical data collected from the St. Clair River between Michigan and Ontario, Canada, 2008-016-FA Edition: 1.0 Geospatial_Data_Presentation_Form: online Series_Information: Series_Name: Open-File Report Issue_Identification: 2010-1035 Publication_Information: Publication_Place: Woods Hole Coastal and Marine Science Center Publisher: U.S. Geological Survey Online_Linkage: http://pubs.usgs.gov/of/2010/1035/ Description: Abstract: In 2008, the U.S. Geological Survey (USGS), Woods Hole Coastal and Marine Science Center (WHCMSC), in cooperation with the U.S. Army Corps of Engineers conducted a geophysical and sampling survey of the riverbed of the Upper St. Clair River between Port Huron, MI, and Sarnia, Ontario, Canada. The objectives were to define the Quaternary geologic framework of the St. Clair River to evaluate the relationship between morphologic change of the riverbed and underlying stratigraphy. This report presents the geophysical and sample data collected from the St. Clair River, May 29-June 6, 2008 as part of the International Upper Great Lakes Study, a 5-year project funded by the International Joint Commission of the United States and Canada to examine whether physical changes in the St. Clair River are affecting water levels within the upper Great Lakes, to assess regulation plans for outflows from Lake Superior, and to examine the potential effect of climate change on the Great Lakes water levels ( http://www.iugls.org). This document makes available the data that were used in a separate report, U.S. Geological Survey Open-File Report 2009-1137, which detailed the interpretations of the Quaternary geologic framework of the region. This report includes a description of the suite of high-resolution acoustic and sediment-sampling systems that were used to map the morphology, surficial sediment distribution, and underlying geology of the Upper St. Clair River during USGS field activity 2008-016-FA . Video and photographs of the riverbed were also collected and are included in this data release. Future analyses will be focused on substrate erosion and its effects on river-channel morphology and geometry. Ultimately, the International Upper Great Lakes Study will attempt to determine where physical changes in the St. Clair River affect water flow and, subsequently, water levels in the Upper Great Lakes. Purpose: This grid represents approximately 4.5 kilometers of swath bathymetric data collected within the Upper St. Clair River, May 29 - June 4, 2008. These data are used to define the morphology of the riverbed. These data were collected offshore of Marysville, Michigan and used to compare the geologic framework with the northernmost survey area. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20080529 Ending_Date: 20080601 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -82.462293 East_Bounding_Coordinate: -82.446677 North_Bounding_Coordinate: 42.933208 South_Bounding_Coordinate: 42.922457 Keywords: Theme: Theme_Keyword_Thesaurus: General Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Woods Hole Coastal and Marine Science Center Theme_Keyword: WHCMSC Theme_Keyword: Coastal and Marine Geology Program Theme_Keyword: CMGP Theme_Keyword: bathymetry Theme_Keyword: swath bathymetry Theme_Keyword: interferometry Theme_Keyword: SEA SWATHplus 234 kHz Theme_Keyword: sea-floor morphology Theme_Keyword: WHCMSC field activity serial number 08016 Theme_Keyword: ESRI Grid Theme_Keyword: USGS R/V Rafael Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme_Keyword: geoscientificInformation Theme_Keyword: imageryBaseMapsEarthCover Theme_Keyword: inlandWaters Place: Place_Keyword_Thesaurus: General Place_Keyword: North America Place_Keyword: United States Place_Keyword: Michigan Place_Keyword: Great Lakes Place_Keyword: Upper Great Lakes Place_Keyword: Lake Huron Place_Keyword: St. Clair River Place_Keyword: Upper St. Clair River Place_Keyword: Marysville Place_Keyword: Canada Place_Keyword: Ontario Access_Constraints: None Use_Constraints: These data are NOT to be used for navigation. Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543 Country: USA Contact_Voice_Telephone: 508-548-8700 x2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: http://pubs.usgs.gov/of/2010/1035/gis_catalog/bathymetry/mville/mville_05m_sm.jpg Browse_Graphic_File_Description: Thumbnail image of the color-coded swath bathymetry Browse_Graphic_File_Type: JPEG Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.2.6.1500 Cross_Reference: Citation_Information: Originator: David S. Foster Originator: Jane F. Denny Publication_Date: 2009 Title: Quaternary Geologic Framework of the St. Clair River between Michigan and Ontario, Canada Edition: 1.0 Geospatial_Data_Presentation_Form: on-line document Series_Information: Series_Name: Open-File Report Issue_Identification: 2009-1137 Publication_Information: Publication_Place: Woods Hole Coastal and Marine Science Center Publisher: U.S. Geological Survey, Coastal and Marine Geology Program Online_Linkage: http://pubs.usgs.gov/of/2009/1137/ Data_Quality_Information: Logical_Consistency_Report: All bathymetric data were collected during USGS cruise 08016 using a SWATHplus 234-kHz swath bathymetric system and an Octopus F180R Attitude and Positioning System. Quality control was conducted during processing of the data. Any spurious data or artifacts were removed or minimized. Completeness_Report: Swath bathymetric data (lines 84 - 91) were processed and used to generate the bathymetric grid. Gaps present in this data set fall within shallow water areas where the swath width of the bathymetric system decreased to less than the 75-m survey trackline spacing. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Differential Global Positioning System (DGPS) navigation data were acquired with the forward, or primary, Octopus F180R Attitude and Positioning system DGPS antenna and transmitted via a network connection to the SWATHplus data collection software. The F180R Attitude and Positioning system uses 2 L1 antennas for position and heading and an Inertial Measurement Unit (IMU) for motion sensing. The F180R IMU is mounted on the rigid sidemount used to deploy the SWATHplus bathymetric system, and is located directly above the SWATHplus transducers. The F180R antennas are mounted on a rigid horizontal pole, 3 meters above the F180R IMU, offset in a forward/aft configuration (see 'source contribution' for a full description of the F180R). DGPS accuracy is 1 to 3 meters, depending on the distance from a US Coast Guard coastal repeater station (http://www.navcen.uscg.gov/). Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: DGPS navigation was used to record horizontal and vertical position (x,y,z) of bathymetric soundings during data acquisition aboard the USGS R/V Rafael. An additional DGPS antenna, connected to an Ashtech Z-Xtreme receiver, was attached at the center of the rigid horizontal pole used to mount the Octopus F180R Attitude and Positioning system antennas. Real Time Kinematic GPS (RTK-GPS) corrections were applied to the Ashtech Z-Xtreme navigation data during post-processing in order to provide sub-meter vertical accuracy for bathymetric soundings. Fort Gratiot, MI, a Continuously Operating Reference Station (CORS) (http://www.ngs.noaa.gov/CORS/), was used as the reference station for the RTK-GPS corrections. A rover RTK-GPS station was established at the tidal benchmark at the U.S. Coast Guard Base at Port Huron in order to determine the offset between North American Vertical Datum of 1988 (NAVD 88) (vertical datum referenced at the CORS site) and the International Great Lakes Datum 1985 (IGLD 85) referenced at the tidal benchmark. The following offsets were applied to the shipboard DGPS data during post-processing: vertical offset between NAVD 88 and IGLD 85, the measured distance between the DGPS antenna and SWATHplus transducer, and the depth of the transducer below the water line. The resulting values were applied to the bathymetric soundings during processing to provide a measure of depth relative to IGLD 85. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Type_of_Source_Media: disc Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20080529 Ending_Date: 20080602 Source_Currentness_Reference: ground condition Source_Contribution: Swath-bathymetric and acoustic-backscatter data were acquired with a SEA, Ltd., SWATHplus interferometric sonar operating at a 234-kHz frequency (http://www.sea.co.uk/swathplus.aspx?nav=products). The SWATHplus transducer was mounted at the bow of the USGS R/V Rafael. Bathymetric data were acquired over variable swath widths ranging from 10 to 100 m, in water depths of about 1 to 25 m. A total of 109 km of swath bathymetric data were collected. SWATHplus acquisition software (version 3.05.90) was used to digitally log the bathymetric data at a rate of 30 pings/second and 3,072 samples per swath (ping) in the SWATHplus SXR format. Data collection parameters are saved into a SWATHplus session file in SEA's SXS format. These files can be later used for data replay. An Octopus F180R Attitude and Positioning system (see: ) recorded ship motion (heave, pitch, roll, and yaw). These data were transmitted via network connection to the SWATHplus data collection software. The Octopus F180R Inertial Measurement Unit (IMU) was mounted directly above the SWATHplus transducers, to minimize lever arm offsets that can lead to positioning errors. The F180R uses two L1 antennas for position and heading accuracy. The antennas are mounted on a rigid horizontal pole, 3 meters above the F180R IMU, with a horizontal separation of 1 meter and are offset from the IMU in a forward/aft configuration. The forward offset of the primary antenna from the IMU is 0.5 meters, with no port/starboard offset. Eight sound-velocity profiles were acquired during survey operations at roughly 4-hr intervals using an Applied Microsystems SV Plus V2 Velocimeter (Applied Microsystems, 2008). Process_Step: Process_Description: SWATHplus Configuration Offsets of the SWATHplus transducers and DGPS navigation antenna from the Octopus F180R Attitude and Positioning System Inertial Measurement Unit (IMU), which is the designated common reference point (CRP), were verified as entered correctly into the SWATHplus session file for the survey. Offsets forward, below, and to the right (starboard) of the CRP are considered positive: Primary navigation antenna to IMU: Height offset: -3 meters, Forward offset: 0 meters, Starboard offset: 0 meters Draft of the MRU below water line: 0.63 meters. Offset of SWATHplus transducer 1 (port side) from the CRP: Height offset: 0.158 meters Forward offset: -0.019 meters Starboard offset: -0.11 meters Offset of SWATHplus transducer 2 (starboard side) from the CRP: Height offset: 0.158 meters Forward offset: -0.019 meters Starboard offset: 0.11 meters Software: SWATHplus 3.05.19.0 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Sound Velocity Profiles Data from eight sound velocity profiles were incorporated into the SWATHplus session file. The velocity data is stored in Microsoft Office Excel 2003 SP3 commas-separated values (csv) format, and the location and time, as well as the velocity information, were extracted from the csv file and entered into the sound velocity profile dialog in SWATHplus. Sound velocity information closest in time to the bathymetric data collected are utilized by the SWATHplus program to correct for variations in sound velocity through the water column, minimizing ray bending effects that can produce erroneous depth soundings. Software: SWATHplus 3.05.19.0 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 5084572310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Bathymetric Filters Various filters were set in the SWATHplus software in order to refine the depth of the seafloor across the swath for each ping based on the phase and amplitude of the returning sonar signal. Only the filters listed below were set, all others were turned off. Filter settings: Low amp: 100; Range: Max amplitude 1 meter, min amplitude 0 meters; Phase Confidence: 70 percent; Angle Proximity: 25 sample window, range 0.11, threshold 9 samples, Minimum elevation -120 degrees; Box: Minimum Depth 0 meters, Minimum Horizontal Range 1 meter; Median sample window size 5; Along track 1: Max depth difference 10 meters, window size 5, learn rate 0.6 Along track 2: Max depth difference 5 meters, window size 1, learn rate 0.9; Mean output processed pixel size: 0.2 meters. Software: SWATHplus 3.05.19.0 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 5084572310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Patch test, used to calibrate roll offsets, lines were replayed through the SWATHplus software after the velocity profiles (for that day) and filters were set and saved in the SWATHplus session file. Processed data files were saved in the SWATHplus sxp format. The patch test processed sxp files (p1 p8.sxp) were imported into the SWATHplus Grid Processor program and run 2 times through the calibration tool to determine any static offsets for roll. Results: Port roll offset = +0.254 degrees, Stbd roll offset = -1.037 degrees. These offsets were then entered into the SWATHplus session file. Software: Grid Processor 3.05.19 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 5084572310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Post-Processed Navigation (RTK corrections applied to DGPS data): The Ashtech Z-Xtreme receiver collected position (x,y) and elevation (z) data of the DGPS antenna during survey operations (see: Source Contribution for antenna configuration). DGPS position data (xyz) were recorded with HYPACK Hydrographic Survey Software (http://www.hypack.com/). Real-Time Kinematic (RTK) corrections based on vertical position data from the Fort Gratiot, Michigan National Geodetic Survey Continuously Operating Reference Stations (CORS) were applied to the recorded antenna heights (z) during post-processing using NovAtels Waypoint GrafNav post-processing high-precision package, a static kinematic/baseline processor (http://www.novatel.com/). A rover RTK-GPS station was established at the tidal benchmark at the U.S. Coast Guard Base at Port Huron in order to determine the offset between North American Vertical Datum of 1988 (NAVD 88) (vertical datum referenced at the CORS site) and the International Great Lakes Datum 1985 (IGLD 85) referenced at the tidal benchmark. An offset was applied to the RTK-corrected antenna heights to convert the reference heights to the local chart datum, International Great Lakes Datum 198 (IGLD85). Additional offsets were applied to translate the height of the antenna to the waterline. The resulting data file contained date, time (every second) and height of waterline relative to IGLD85. (Navigation data are stored in American Standard Code for Information Interchange (ASCII) files. Offsets were applied using GNUs Not Unix (GNU) gawk 3.1.5 programming language). NovAtel GrafNav 8.1.0; GNU gawk 3.1.5; HYPACK 8.2.3.7 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 5084572310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: The date, time (every second) and height of waterline relative to IGLD85 were imported to The MathWorks MATLAB technical computing software (version 7.4.0 (R2007a)). A median filter (medfilt1) using a 361 boxcar (approximately a 6 minute filter) was applied to smooth the chatter present in the elevation data. The filtered elevations were then exported from MATLAB. A GNU gawk script was used to downsample the output file from every second to every minute: BEGIN { latmin = 0.0}{min= substr($1,4,2); if(lastmin !=min) {printf("%s %s %.2f\n", $1, $2, $3)} lastmin=min;} The filtered elevations at one-minute time intervals were then entered into SEA, LTD SWATHplus software as a Tide in the following format: HR:MN DD/MM/YYYY XXX.XX, where HR=hour, MN=minute, DD=day, MM= month, YYYY=year, XXX.XX=tide. MATLAB 7.4.0 (R2007a) Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 5084572310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Raw SXR bathymetry data were replayed line by line through the SEA SWATHplus software to generate processed SWATHplus sxp files. The following information was stored within the SWATHplus session files and applied to the raw bathymetric soundings: eight sound velocity profiles, TIDE (RTK-corrected water level heights relative to IGLD85), roll offsets calculated during pre-survey patch test, draft of the transducer below the water line, and the measured angles and relative positions of the swath bathymetric transducers. The SWATHplus software applies the pitch, roll, heave, and heading data supplied by the F180R IMU, to compensate depth solutions across the swath for any ship motion. Software: SWATHplus 3.05.19.0 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700x2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: All the processed SWATHplus sxp files were imported into CARIS HIPS/SIPS Hydrographic Data Processing System software (www.caris.com) using the CARIS HIPS Conversion Wizard (specifying the SWATHplus format, RawData (sxp files), a CARIS HIPS project, vessel, and julian day, ground coordinates [UTM zone 17N WGS84] and speed of sound of 1450 meters/second as measured at the SWATHplus transducer face). The conversion wizard converts depth, navigation, and motion data recorded in the sxp files into an internal CARIS HIPS format. The SXP files were then edited using the following filters: across track distance 7 times nadir depth (reduces the swath width to seven times the water depth in order to reduce noise in the outer range), across track angle of 2 degrees (calculates the slope of each beam in degrees to the prior and post beams within the same swath. If slopes exceed the specified value and are of opposite sign the beam is rejected), Missing neighbors: port and starboard, forward and aft, and any 2 of 4 (filters the soundings if neighboring soundings to the port and starboard, forward and aft, or if two of the four neighboring beams are missing) (http://www.caris.com). Individual files were further edited with the SWATH EDITOR where remaining outliers were manually removed. Field sheets were then created with UTM zone 17N, WGS84 projection and used to organize the processed bathymetric data and generate A Bathymetry Associated with Statistical Error (BASE) surfaces. Three BASE surfaces were created at the following resolutions: 0.5, 2.0 and 5.0 meters and the swath angle Surface Type (default). The maximum footprint size in the BASE surface that a sounding was utilized was set to 9 pixels, and the include status for soundings were set to accepted, examined, and outstanding. Individual field sheets and BASE surfaces were generated for the Upper St. Clair, Marysville and Port Lambton study areas. Each of the BASE surfaces was interpolated in CARIS HIPS. The interpolation is only applied to areas of no data, and helped to fill in small gaps in the surface. Parameters used for the interpolation were: Matrix size 5X5 pixels, minimum number of neighboring pixels required for interpolation was 6. Software: CARIS HIPS/SIPS 6.1 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane F. Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02536 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: Interactive Visualization Systems (IVS) Data Magician software (version 6.7.0k) was used to import the CARIS BASE surfaces. These data were imported as Gridded Data in the CARIS Base Surface File Type. The CARIS Base Surfaces were converted and saved in IVS dtm and geo format. The 0.5 m bathymetric grid contained data gaps at nadir. The filters used within the SWATHplus software eliminated noisy data near nadir, resulting in data gaps of less than 5 meters at nadir. To fill these data gaps, the IVS command dtmmerge from within the Fledermaus Commander was used to merge the high-resolution 0.5 meter grid with the lower resolution 2.0 grid. Dtmmerge in file1_highres.dtm file2_lowres.dtm out output.dtm cellsize 0.5 By default, the lower resolution grid is used to fill data gaps present within the higher resolution grid, with the output grid reflecting the high-resolution input grid: 0.5 meters. The final grid was exported from IVS Data Magician as an Arcview Grid (ESRI ASCII grid). Software: IVS DMagic 6.7.0 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane F. Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02536 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: The ESRI ASCII grid was then imported to ArcGIS 9.2 using the ASCII to Raster Tool within ArcToolbox - Conversion Tools - To Raster. The projection of the grid was then defined as UTM, zone 17N, WGS84, using Arc Toolbox, Data Management Tools, Projections and Transformations, Define Projection. Software: ESRI ArcGIS 9.2 Process_Date: 2009 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane F. Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02536 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Process_Step: Process_Description: The bathymetric grid was converted from RASTER to ASCII using ArcGIS 9.2, ArcToolbox, Conversion Tools, From Raster, Raster to ASCII. ArcGIS 9.2 Process_Date: 2010 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jane F. Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Grid Cell Row_Count: 2344 Column_Count: 2508 Vertical_Count: 1 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 17 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.999600 Longitude_of_Central_Meridian: -81.000000 Latitude_of_Projection_Origin: 0.000000 False_Easting: 500000.000000 False_Northing: 0.000000 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 0.500199 Ordinate_Resolution: 0.500199 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: D_WGS_1984 Ellipsoid_Name: WGS_1984 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257224 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: International Great Lakes Datum (IGLD) 1985 Altitude_Resolution: 0.5 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit depth coordinate included with horizontal coordinates Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: Jane Denny Contact_Organization: U.S. Geological Survey Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543 Country: USA Contact_Voice_Telephone: 508-548-8700 x2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Resource_Description: Downloadable Data Distribution_Liability: Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: WinZip Format_Version_Number: 9.0 Format_Information_Content: WinZip file containing ASCII raster grid, ESRI binary grid and metadata for bathymetric data collected during USGS cruise 08016. File_Decompression_Technique: Use WinZip or pkUnzip Transfer_Size: 3774 KB Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: htp://pubs.usgs.gov/of/2010/1035/gis_catalog/bathymetry/mville_05m.zip Access_Instructions: Data can be downloaded via the World Wide Web (WWW) Fees: none Technical_Prerequisites: The grid contained in the mville_05m.zip file is available as an ESRI Binary grid and an ASCII grid with an ESRI header. However, the folder structure within mville_05m.zip is critical to proper use of the ESRI binary grid. To utilize these data, the user must have a GIS software package capable of reading ESRI Binary grids or ASCII grids with ESRI headers, or be able to manipulate an ASCII matrix with a geospatial header. The ASCII raster files can be easily converted to ESRI grid format in either ArcView with Spatial Analyst extension (Import Data Source: ASCII Raster) or ArcGIS with Spatial Analyst extension (ASCII to Raster). The user should select floating point grid (as opposed to integer grid) when converting the bathymetry data. Metadata_Reference_Information: Metadata_Date: 20110125 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Jane F. Denny Contact_Position: Geologist Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543 Country: USA Contact_Voice_Telephone: 508-548-8700 x 2311 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: jdenny@usgs.gov Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time Metadata_Access_Constraints: none Metadata_Use_Constraints: none Metadata_Extensions: Online_Linkage: http://www.esri.com/metadata/esriprof80.html Profile_Name: ESRI Metadata Profile