Skip past header information
USGS - science for a changing world
NOAA Logo with link to NOAA Home Page.CT DEP Logo with link to CT DEP Home Page.  

U.S. Geological Survey Open-File Report 2010–1100

Surficial Geology of the Sea Floor in Long Island Sound Offshore of Orient Point, New York


Conversion Factors

Skip past contents information

SI to Inch/Pound

Multiply By To obtain
Length
centimeter (cm) 0.3937 inch (in.)
millimeter (mm) 0.03937 inch (in.)
meter (m) 3.281 foot (ft)
meter (m) 1.094 yard (yd)
kilometer (km) 0.6214 mile (mi)
kilometer (km) 0.5400 mile, nautical (nmi)
Area
square kilometer (km²) 0.3861 square mile (mi²)
square meter (m²) 10.76 square foot (ft²)

Phi-notation (Krumbein, 1934) as used in this report is defined as: Φ = -log 2 (d), where d is the grain diameter in millimeters. Phi-class intervals in millimeters are given in the data dictionary in the Sediments section of this report.

The frequencies of sidescan sonar and multibeam bathymetry are measured in kilohertz (kHz), 1,000 periods per second.

The vertical datum for tidal-zone measurements is mean lower low water.

Skip USGS links group

Accessibility FOIA Privacy Policies and Notices

Take Pride in America logo USAGov logo U.S. Department of the Interior | U.S. Geological Survey
End of USGS links group