Processed continuous resistivity profile data collected in Northport Harbor on Long Island, New York on May 13, 2008

Metadata also available as - [Questions & Answers] - [Parseable text]

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator: John F. Bratton
Originator: VeeAnn A. Cross
Publication_Date: 2012
Title:
Processed continuous resistivity profile data collected in Northport Harbor on Long Island, New York on May 13, 2008
Edition: 1
Series_Information:
Series_Name: Open-File Report
Issue_Identification: 2011-1041
Publication_Information:
Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA
Publisher: U.S. Geological Survey, Coastal and Marine Geology Program
Online_Linkage:
<https://pubs.usgs.gov/of/2011/1041/data/resistivity/proc_resis/northport/may13_proc.zip>
Online_Linkage: <https://pubs.usgs.gov/of/2011/1041/html/catalog.html>
Larger_Work_Citation:
Citation_Information:
Originator: V.A. Cross
Originator: J.F. Bratton
Originator: J. Crusius
Originator: C.W. Kroeger
Originator: C.W. Worley
Publication_Date: 2012
Title:
Continuous Resistivity Profiling Data from Northport Harbor and Manhasset Bay, Long Island, New York
Series_Information:
Series_Name: Open-File Report
Issue_Identification: 2011-1041
Publication_Information:
Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA
Publisher: U.S. Geological Survey, Coastal and Marine Geology Program
Other_Citation_Details: CD-ROM
Online_Linkage: <https://pubs.usgs.gov/of/2011/1041/>
Description:
Abstract:
An investigation of coastal groundwater systems was performed along the north shore of Long Island, New York during May 2008 to constrain nutrient delivery to Northport Harbor and Manhasset Bay by delineating locations of likely groundwater discharge. The embayments are bounded by steep moraines and are underlain by thick fine-grained sediments deposited in proglacial lakes during the last ice age. Beach sand and gravel overlie the glacial deposits along the coast. The continuous resistivity profiling (CRP) surveys that were conducted indicate the existence of low-salinity groundwater in shore-parallel bands, typically 25 to 50 meters wide, along the shorelines of both bays. Piezometer sampling and seepage meter deployments in intertidal and subtidal areas of the two bays confirmed the presence and discharge of brackish and low-salinity groundwater. The large tidal ranges (up to 3 meters), and the steep onshore topography and hydraulic gradients are important variables controlling coastal groundwater discharge in these areas. For more information on the survey involved in this project, see <http://quashnet.er.usgs.gov/data/2008/08007/>.
Purpose:
This dataset provides the processed continuous resistivity profile (CRP) data collected on May 13, 2008 in Northport Harbor on Long Island, New York. The CRP system (AGI SuperSting) images the subsurface electrical properties of an estuarine, riverine or lacustrine environment. Resistivity differences can be attributed to subsurface geology (conductive vs less conductive layers) and hydrogeologic conditions with fresh water exhibiting high resistivity and saline conditions showing low resistivity. This also acts as an archive of these data.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 20080513
Currentness_Reference: ground condition
Status:
Progress: Complete
Maintenance_and_Update_Frequency: None planned
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -73.367
East_Bounding_Coordinate: -73.353100
North_Bounding_Coordinate: 40.909683
South_Bounding_Coordinate: 40.888367
Keywords:
Theme:
Theme_Keyword_Thesaurus: General
Theme_Keyword: U.S. Geological Survey
Theme_Keyword: USGS
Theme_Keyword: Coastal and Marine Geology Program
Theme_Keyword: CMGP
Theme_Keyword: Woods Hole Coastal and Marine Science Center
Theme_Keyword: WHCMSC
Theme_Keyword: Field Activity Number 2008-007-FA
Theme_Keyword: Info Bank ID T-1-08-LI
Theme_Keyword: navigation
Theme_Keyword: bathymetry
Theme_Keyword: Continuous Resistivity Profiling
Theme_Keyword: CRP
Theme_Keyword: R/V Terrapin
Theme_Keyword: Lowrance GPS
Theme_Keyword: AGI SuperSting
Theme_Keyword: processed data
Theme_Keyword: groundwater
Theme_Keyword: submarine groundwater
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Category
Theme_Keyword: elevation
Theme_Keyword: location
Theme_Keyword: oceans
Theme_Keyword: oceans and estuaries
Theme_Keyword: oceans and coastal
Theme_Keyword: geoscientificInformation
Place:
Place_Keyword_Thesaurus: General
Place_Keyword: North America
Place_Keyword: North Atlantic
Place_Keyword: United States
Place_Keyword: New York
Place_Keyword: Long Island
Place_Keyword: Northport Harbor
Place_Keyword: Suffolk County
Place_Keyword: Long Island Sound
Access_Constraints: None.
Use_Constraints:
The public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: VeeAnn A. Cross
Contact_Organization: U.S. Geological Survey
Contact_Position: Marine Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: Woods Hole Coastal and Marine Science Center
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700 x2251
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: vatnipp@usgs.gov
Native_Data_Set_Environment:
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.2.6.1500
Cross_Reference:
Citation_Information:
Originator: Advanced Geosciences, Inc.
Publication_Date: 2008
Title:
Instruction Manual for EarthImager 2D, version 2.2.8, Resistivity and IP inversion software
Publication_Information:
Publication_Place: Austin, Texas
Publisher: Advanced Geosciences, Inc.
Online_Linkage: <http://www.agiusa.com>
Cross_Reference:
Citation_Information:
Originator: Advanced Geosciences, Inc.
Publication_Date: 2003
Title:
Instruction Manual for the Marine Log Manager Module of the Administrator for SuperSting Software, Release 1.3.7
Publication_Information:
Publication_Place: Austin, Texas
Publisher: Advanced Geosciences, Inc.
Online_Linkage: <http://www.agiusa.com>

Data_Quality_Information:
Logical_Consistency_Report:
All the data files were handled in the same manner. All data collected on this day were collected with the 15-m streamer.
Completeness_Report:
All usable data collected on this day were processed. The processed files are included in this dataset. Collected data files not processed due to navigation issues are L8F2, L9F1 and L9F2. One file was too short to process - L13F1. Additionally, there isn't a line 17, 18 or 19. Those files were never collected at all due to GPS problems. And while the naming convention is usually L*F*, lines 21 and 22 break this convention by being called F21L1 and F22L2.
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report:
The navigation system used was a Lowrance 480M with an LGC-2000 Global Positioning System (GPS) antenna. The antenna was located at the anchor point for the resistivity streamer, which is also directly above the fathometer transducer mount point. The GPS system is published to be accurate to within 10 meters.
Vertical_Positional_Accuracy:
Vertical_Positional_Accuracy_Report:
All bathymetry values were collected by the 200 kHz Lowrance fathometer. The fathometer was mounted starboard side aft, directly below the GPS antenna and the resistivity streamer tow point. The transducer was approximately 0.30 meters below the sea surface, and this draft was not corrected for. The Lowrance manufacturer indicates the speed of sound used by the system to convert to depths is 4800 feet/second (1463 meters/second). All values are assumed to be accurate to within 1 meter.
Lineage:
Source_Information:
Source_Contribution:
The continuous resistivity profile (CRP) system used on this cruise was an AGI SuperSting marine system described at the website: www.agiusa.com/marinesystem.shtml. Two different streamers were used for data collection - not simultaneously. One streamer was a 50-m streamer with an 11 electrode array with electrodes spaced 5 meters apart. The other streamer was a 15-m streamer with an 11 electrode array with electrodes spaced 1.5 meters apart. In both cases, the source electrodes are graphite, while the receiver electrodes are stainless steel. A dipole-dipole configuration was used for the data collection in which two fixed current electrodes are assigned with the measurement of voltage potential between electrode pairs in the remaining electrodes. The maximum depth below the water surface the streamer can reach is approximately ¼ the streamer length. So for the 50-m streamer, maximum depth is about 12.5 meters, while the 15 meter streamer can reach about 3.75 meters. Each line of data acquisition records several files. The two files necessary for processing are the *.stg and the *.gps file. The STG file contains the resistivity data, while the GPS file contains the navigation information. The navigation system used in concert with the CRP system is a Lowrance LMS-480M with an LGC-2000 GPS antenna and a 200 kHz fathometer transducer. The transducer also contains a temperature sensor. Lowrance indicates the speed of sound used by the system is 4800 feet/second. Both the temperature and depth information are recorded in the logged GPS file. The CRP system images the subsurface electrical properties of an estuarine, riverine or lacustrine environment. Resistivity differences can be attributed to subsurface geology (conductive vs less conductive layers) and hydrogeologic conditions with fresh water exhibiting high resistivity and saline conditions showing low resistivity.
Process_Step:
Process_Description:
The resistivity data (*rescale.stg) were merged with the navigation data (*.gps) and linearized using AGI's Marine Log Manager software. (Note that the Marine Log Manager version is different than the software version of the AGISSAdmin software of which it is a part - although shipped together, the software is developed separately). The version of Marine Log Manager used was AGI SSAdmin MLM v 1.3.4.217. Because the original data collection did not have the appropriate offset for the first electrode, a GPS offset of -2 was used to process the data. Additionally, the *rescale.stg files were used in the processing to account for another problem in the initial acquisition which set the wrong electrode spacing. The rescaling is explained in the metadata for the raw data available from <https://pubs.usgs.gov/of/2011/1041/html/catalog.html>. The output from this process is a linearized STG file and a DEP file which contains water depths at distances along line. This process step and all subsequent process steps were performed by the same person - VeeAnn A. Cross.
Source_Used_Citation_Abbreviation: *.gps
Source_Used_Citation_Abbreviation: *rescale.stg
Process_Date: 200805
Source_Produced_Citation_Abbreviation: *lin.stg
Source_Produced_Citation_Abbreviation: *.dep
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: VeeAnn A. Cross
Contact_Organization: U.S. Geological Survey
Contact_Position: Marine Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: Woods Hole Coastal and Marine Science Center
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700 x2251
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: vatnipp@usgs.gov
Process_Step:
Process_Description:
Each DEP file was checked for anomalous bathymetry values, or duplicated distance along line values, and those lines in the file were deleted.
Process_Date: 200805
Process_Step:
Process_Description:
EarthImager software does not require that a default resistivity value for the water column be supplied in the DEP file. If one is not supplied, then it calculates a value based on the first electrode pair. For this cruise instruments deployed in the field at the same time as the CRP data collection recorded water salinity and temperature. The salinity was measured at 23 ppt with an average water temperature of 15 degrees Celsius. Based on these values, the calculated water resistivity value is 0.34 ohm-m. This calculation was done using the website <http://www2.sese.uwa.edu.au/~hollings/pilot/denscalc.html> and using the 1/conductivity for the result. The water resistivity value was added to the appropriate place in the DEP files so that a known water resistivity value would be used in the calculations.
Source_Used_Citation_Abbreviation: *.dep
Process_Date: 200809
Source_Produced_Citation_Abbreviation: *wres.dep
Process_Step:
Process_Description:
EarthImager version 2.2.8 build 562 was then used to process the data files. The *.ini file accompanying the results contains the parameters used during the processing. These parameters include: minimum voltage: 0.02; minimum abs(V/I): 2E-5; max repeat error: 3%; min apparent res: 0.03; max apparent res: 1000; max reciprocal error: 5%; remove negative resistivity, smooth model inversion; finite element method; Cholesky decomposition; Dirichlet boundary condition; thickness incremental factor: 1.1; depth factor: 1.1; max number of CG iterations: 100; stop criteria: number of iterations 8; max RMS 3%; error reduction 5%; L2Norm; CRP processing using a 65% overlap. These INI files can be loaded in EarthImager to help maintain consistent processing parameters for other datasets. When the files are processed, numerous files are generated. Because of the "roll-along" nature of the processing, each line takes several iterations of processing which are then combined into a single output. The output consists of numerous files including JPEG images and text files representing the XYZ position of each resistivity value. Because the files collected on this day are so short, the roll-along component of the processing was unnecessary. For this reason, the JPEG image and the XYZ data had to be saved manually. First, just the inverted resistivity line is displayed using View - Inverted Resistivity Section. Then the image can be saved using File - Save Image. The JPEG files produced use a color scale for the resistivity that is based on the data extent from that particular file. And finally, the XYZ data had to be saved manually using File - Save Data in XYZ format. The XYZ output file extension is DAT instead of XYZ. This DAT file has three columns of information: distance along line in meters, depth in meters, and resistivity value in ohm-m. Automatically generated is the file with the LLT extension. The LLT file has four columns of information: longitude in decimal degrees, latitude in decimal degrees, depth in meters, and resistivity value in ohm-m. The white line appearing in most of the JPEG images is the seafloor position based on the bathymetry. An instance where the white line is not visible indicates that the seafloor was not reached with the system. Many of these lines are in water too deep or almost too deep for the system. You can process an individual line as many times as you want and the software places the results in incrementing folder names starting with trial1. These data represent trial4 which is the processing with the water resistivity value.
Source_Used_Citation_Abbreviation: *lin.stg
Source_Used_Citation_Abbreviation: *wres.dep
Process_Date: 200809
Source_Produced_Citation_Abbreviation: *.ini
Source_Produced_Citation_Abbreviation: *.llt
Source_Produced_Citation_Abbreviation: *.xyz or *.dat
Source_Produced_Citation_Abbreviation: *.jpg
Process_Step:
Process_Description:
The XYZ output file was then loaded into Matlab version 7.5.0.342 (R2007b), along with the depth information from the DEP file, to create a new JPEG image with the same color scale for all the data files. In this manner, the JPEG images can be compared directly. Care was taken to try to get the vertical and horizontal scales uniform as well, although this was not always possible due to Matlab limitations. These images reside in the "matlabimages" folder (a sub-folder of the processed data folder). These JPEG images include a black line within the resistivity profile which represents the sediment water interface based on the depth values from the DEP file. The local Matlab script used to load the data was cp_lis_15m.m, while the local Matlab script used to export the JPEG image was exportfig.m.
Source_Used_Citation_Abbreviation: *.xyz or *.dat
Source_Used_Citation_Abbreviation: *wres.dep
Process_Date: 201010
Source_Produced_Citation_Abbreviation: *.jpg
Process_Step:
Process_Description:
Corel PhotoPaint v. 11 was used to crop excess white space from around the MATLAB resistivity profile JPEG images, saving the JPEGs with the same filename.
Source_Used_Citation_Abbreviation: *.jpg
Process_Date: 201010
Source_Produced_Citation_Abbreviation: *.jpg
Process_Step:
Process_Description:
A bash shell script, run under CYGWIN version 1.5.1, was used to incorporate the imagename prefix into the title of the EarthImager resistivity JPEG images. The shell script uses the convert command which is part of the ImageMagick (v. 6.4) software package. The script is as follows:
#!/bin/bash
files=`ls *.jpg | cut -d. -f1`
for file in $files
do
	if [[ $file == *Long* ]];
		then
		convert -gravity North -font Arial -pointsize 20 -annotate -120+0 $file $file.jpg added_name3/$file.jpg
	elif [[ $file == *Short* ]];
		then
		convert -gravity North -font Arial -pointsize 24 -annotate -50+0 $file $file.jpg added_name3/$file.jpg
	else convert -gravity North -font Arial -pointsize 24 -annotate -50+0 $file $file.jpg added_name3/$file.jpg
	fi
done
Source_Used_Citation_Abbreviation: *.jpg
Process_Date: 201109
Source_Produced_Citation_Abbreviation: *.jpg

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Geographic:
Latitude_Resolution: 0.000001
Longitude_Resolution: 0.000001
Geographic_Coordinate_Units: Decimal degrees
Geodetic_Model:
Horizontal_Datum_Name: D_WGS_1984
Ellipsoid_Name: WGS_1984
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257224
Vertical_Coordinate_System_Definition:
Depth_System_Definition:
Depth_Datum_Name: Local surface
Depth_Resolution: 0.1
Depth_Distance_Units: meters
Depth_Encoding_Method: Explicit depth coordinate included with horizontal coordinates

Distribution_Information:
Distributor:
Contact_Information:
Contact_Person_Primary:
Contact_Person: VeeAnn A. Cross
Contact_Organization: U.S. Geological Survey
Contact_Position: Marine Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: Woods Hole Coastal and Marine Science Center
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700 x2251
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: vatnipp@usgs.gov
Resource_Description: Downloadable Data
Distribution_Liability:
Neither the U.S. government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: WinZip
Format_Version_Number: 9.0
Format_Information_Content:
The WinZip file contains all the processed CRP data from May 13, 2008 as well as the associated metadata files.
Transfer_Size: 3.3 MB
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name:
<https://pubs.usgs.gov/of/2011/1041/data/resistivity/proc_resis/northport/may13_proc.zip>
Network_Resource_Name: <https://pubs.usgs.gov/of/2011/1041/html/catalog.html>
Offline_Option:
Offline_Media: CD-ROM
Recording_Capacity:
Recording_Density: 640
Recording_Density_Units: MB
Recording_Format: ISO9660
Fees: None.
Technical_Prerequisites:
The data are provided in a WinZip compressed file. The user must have software capable of uncompressing the archive. In addition, portions of the processed data are available in a format compatible with AGI Geosciences EarthImager software. The user must have software capable of reading the AGI format in order to process these data. The data are also available in an XYZ ASCII format.

Metadata_Reference_Information:
Metadata_Date: 20120112
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: VeeAnn A. Cross
Contact_Organization: U.S. Geological Survey
Contact_Position: Marine Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: Woods Hole Coastal and Marine Science Center
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700 x2251
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: vatnipp@usgs.gov
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Extensions:
Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
Profile_Name: ESRI Metadata Profile

Generated by mp version 2.9.6 on Thu Jan 12 17:07:48 2012