ei_contours_1m_dd - interpolated swath bathymetry contours collected by the U.S. Geological Survey - Woods Hole Coastal and Marine Science Center surrounding the nearshore of the Elizabeth Islands, MA, 2010 (ESRI polyline shapefile)

Metadata also available as - [Questions & Answers] - [Parseable text]

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator: U.S. Geological Survey
Publication_Date: 2012
Title:
ei_contours_1m_dd - interpolated swath bathymetry contours collected by the U.S. Geological Survey - Woods Hole Coastal and Marine Science Center surrounding the nearshore of the Elizabeth Islands, MA, 2010 (ESRI polyline shapefile)
Edition: 1.0
Geospatial_Data_Presentation_Form: vector digital data
Series_Information:
Series_Name: Open-File Report
Issue_Identification: 2011-1184
Publication_Information:
Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA
Publisher: U.S. Geological Survey, Coastal and Marine Geology Program
Online_Linkage:
<https://pubs.usgs.gov/of/2011/1184/GIS_catalog/bathy/ei_contours_1m.zip>
Larger_Work_Citation:
Citation_Information:
Originator: Elizabeth A. Pendleton
Originator: David C. Twichell
Originator: David S. Foster
Originator: Charles R. Worley
Originator: Barry J. Irwin
Originator: William W. Danforth
Publication_Date: 2012
Title:
High-Resolution Geophysical Data From the Sea Floor Surrounding the Western Elizabeth Islands, Massachusetts
Edition: 1.0
Series_Information:
Series_Name: Open-File Report
Issue_Identification: 2011-1184
Publication_Information:
Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA
Publisher: U.S. Geological Survey, Coastal and Marine Geology Program
Online_Linkage: <https://pubs.usgs.gov/of/2011/1184/>
Description:
Abstract:
These data were collected under a cooperative agreement between the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS), Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center (WHCMSC). Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of seafloor geology are important first steps toward protecting fish habitat, delineating marine resources, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters of coastal Massachusetts, primarily in water depths of 2-30 meters. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports (<http://woodshole.er.usgs.gov/project-pages/coastal_mass/html/current_map.html>). The data collected in this study area located around the western extent of the Elizabeth Islands includes high resolution bathymetry, acoustic-backscatter intensity, seismic-reflection, and navigation data. These data were collected during a nearshore cruise in September 2010 onboard the R/V Rafael using the following equipment: an SEA Ltd SwathPlus interferometric sonar (234 kHz), Klein 3000 dual frequency sidescan sonar, an Edgetech 424 chirp subbottom profiling system, and 4 GPS antennae. More information about the cruise conducted as part of the project: Geologic Mapping of the Seafloor Offshore of Massachusetts can be found on the Woods Hole Coastal and Marine Science Center Field Activity webpage: <http://quashnet.er.usgs.gov/data/2010/10003/>
Purpose:
These contours represent approximately 24.5 square km of bathymetric data that were collected in 2010. These data are used to define the sea-floor morphology surrounding the nearshore of the western Elizabeth Islands, Massachusetts.
Time_Period_of_Content:
Time_Period_Information:
Range_of_Dates/Times:
Beginning_Date: 20100910
Ending_Date: 20100916
Currentness_Reference: Data were not collected on 20100915 due to weather conditions.
Status:
Progress: Complete
Maintenance_and_Update_Frequency: None planned
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -70.993323
East_Bounding_Coordinate: -70.848939
North_Bounding_Coordinate: 41.461142
South_Bounding_Coordinate: 41.388292
Keywords:
Theme:
Theme_Keyword_Thesaurus: General
Theme_Keyword: U.S. Geological Survey
Theme_Keyword: USGS
Theme_Keyword: Woods Hole Coastal and Marine Science Center
Theme_Keyword: WHCMSC
Theme_Keyword: Coastal and Marine Geology Program
Theme_Keyword: CMGP
Theme_Keyword: bathymetry
Theme_Keyword: swath bathymetry
Theme_Keyword: interferometry
Theme_Keyword: sea-floor morphology
Theme_Keyword: WHCMSC field activity serial number 2010-003-FA
Theme_Keyword: contours
Theme_Keyword: R/V Rafael
Theme_Keyword: Info Bank ID R-3-10-BZ
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Category
Theme_Keyword: oceans
Theme_Keyword: oceans and coastal
Theme_Keyword: oceans and estuaries
Theme_Keyword: elevation
Place:
Place_Keyword_Thesaurus: General
Place_Keyword: North America
Place_Keyword: Atlantic Ocean
Place_Keyword: Massachusetts
Place_Keyword: Cuttyhunk Island
Place_Keyword: Nashawena Island
Place_Keyword: Elizabeth Islands
Place_Keyword: Buzzards Bay
Place_Keyword: Vineyard Sound
Place_Keyword: Quicks Hole
Place_Keyword: Cuttyhunk Harbor
Place_Keyword: Sow and Pigs Reef
Place_Keyword: Penikese Island
Place_Keyword: Gull Island
Place_Keyword: United States
Access_Constraints: None
Use_Constraints:
Not to be used for navigation. The Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: David C. Twichell
Contact_Organization: U.S. Geological Survey
Contact_Position: Oceanographer
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700x2266
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: dtwichell@usgs.gov
Browse_Graphic:
Browse_Graphic_File_Name: <https://pubs.usgs.gov/of/2011/1184/GIS_catalog/bathy/contours.png>
Browse_Graphic_File_Description:
Woods Hole Coastal and Marine Science Center Swath interferometric bathymetry contours surrounding the nearshore of the Elizabeth Islands, MA
Browse_Graphic_File_Type: PNG
Native_Data_Set_Environment:
Microsoft Windows 7 Enterprise Service Pack 1; ArcGIS Desktop 9.3 Service Pack 1; Build 1850
Cross_Reference:
Citation_Information:
Originator: Calder, B.R.
Publication_Date: 2003
Title: Automatic Statistical Processing of Multibeam Echosounder Data
Geospatial_Data_Presentation_Form: document
Series_Information:
Series_Name: International Hydrographic Review
Issue_Identification: Volume 4
Publication_Information:
Publication_Place: The Netherlands
Publisher: INT HYDROGRAPHIC BUREAU

Data_Quality_Information:
Logical_Consistency_Report: Any spurious data points were removed during processing.
Completeness_Report:
All the bathymetric data from cruise 2010-003-FA were used to generate this shapefile, however, l13f1 and l22f1 were corrupted during acquisition, so these lines are not complete. The generator shorted out causing write errors in the raw swath file.
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report:
The navigation for these data was acquired with a Coda Octopus F180 Differential Global Positioning System + Wide Area Augmentation System (DGPS+WAAS); they are accurate to + or - 1 to 2 meters, horizontally. All DGPS data are referenced to WGS84, and the horizontal distance between the pole-mounted interferometric sonar transducers, 0.5m below the sea surface, and the DGPS antennae located on the same pole on the bow of the R/V Rafeal, 2.5 m above the sea surface, are corrected.
Vertical_Positional_Accuracy:
Vertical_Positional_Accuracy_Report:
The theoretical vertical resolution of the SEA Ltd SwathPlus interferometric sonar is 1 % of water depth, approximately 0.03 to 0.25 m within the study area. An Octopus F180 Attitude and Positioning system was used to correct for vessel roll, pitch, heave, and yaw, which has a theoretical vertical accuracy of a few mm. Tidal offsets were corrected to MLLW using RTK GPS heights. Field tests using submerged targets suggest that the vertical accuracy of the RTK tidal correction is less than 30 cm. Gridding algorithms and cell sizes for these data could introduce errors as great as 3 m along the edges of the data. Gridding-induced errors are likely much smaller (< 0.2 m) for most of the study. Changes in ship draft due to water and fuel usage were not considered. Total vertical accuracy for these data are assumed to be + or - 50 cm.
Lineage:
Source_Information:
Source_Citation:
Citation_Information:
Originator: U.S. Geological Survey
Type_of_Source_Media: disc
Source_Time_Period_of_Content:
Time_Period_Information:
Range_of_Dates/Times:
Beginning_Date: 20100910
Ending_Date: 20100916
Source_Currentness_Reference: Data were not collected on 20100915 due to weather conditions.
Source_Contribution:
Swath data acquisition at sea (2010): These bathymetric data were collected with a 234 kHz SEA Ltd Swathplus interferometric sonar mounted on the bow of the R/V Rafael of Woods Hole, MA. Data were acquired between Sept. 10, 2010 and Sept. 18, 2010. All data were acquired with SwathPlus Software (version: 3.7.0). Tracklines are spaced 100 m apart in the shore parallel direction.
Process_Step:
Process_Description:
SwathPlus Software (version: 3.7.0) was used to acquire the raw swath data (*.sxr) and output a processed soundings file (*.sxp). Several bathy filters were applied to the processed file within SwathPlus to remove erroneous soundings and reduce the density of the data. Corrections were also applied for speed of sound changes (using sound velocity profiles), ship motion, GPS antennae offsets, and transducer depth and angle below the surface. Bathy filters included a low amplitude (100%), range (1-m below the surface), box (2-m to avoid nadir), alongtrack 1 (depth difference of 10-m, window size 10-m, and learn rate of 0.6), alongtrack 2 (depth difference of 1-m, window size 1-m, and learn rate of 0.9), and a mean filter (0.1-m).Several lines (l91f1-l100f1) were in very shallow water between Nashawena and Cuttyhunk. The filters used above for the majority of the survey were not tracking the seafloor well in very shallow water. All filters except the low amplitude and mean filter were turned off for these shallow water lines, to allow more data into the processed file. This procedure resulted in more editing later in CARIS, but it preserved more good data as well.
Process_Date: 2010
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth A. Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700x2259
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov
Process_Step:
Process_Description:
CARIS (version: HIPS and SIPS 7.0; service pack 2) was used to further process, finalize, and create a surface from the bathy files (*.sxp) from SwathPlus. CARIS processing with HIPS (hydrographic information processing system) has a workflow that ensures the user has done all necessary corrections to the soundings before creating a final gridded surface. The workflow starts with creating a vessel file (the R/V Rafael for this cruise). The vessel file contains any information related to GPS, MRU, and water level offsets that weren't included during acquisition using SwathPlus. Additionally, the user can report any errors in offsets (i.e. MRU to transducer measurement error, usually around 1-2 cm), which will later be used to calculate TPU (total propagated uncertainty), which is a requirement for CUBE (Combined Uncertainty and Bathymetry Estimator) editing (Calder, 2003). The next steps in the HIPS workflow include creating a project and converting the *.sxp data to CARIS HDCS (hydrographic cesar) format. Sound velocity corrections are the next step in data processing. Errors in soundings due to additional sound refraction not accounted for by sound velocity profiles were done using the CARIS refraction editor. These artifacts can be recognized in a cross-swath profile of a relatively flat patch of sea floor. When viewing the swath data across a profile, the sea floor will appear to have a "frown" or "smile" when in fact the data should be flat across the profile. Insufficient and/or erroneous sound velocity information results in an under or over-estimate of water depth, which increases with distance from the center of the swath. Next a tide correction was applied in CARIS (described in the next process step) and merged with the soundings, and then the TPU was calculated in order to utilize the CUBE editor, which is an uncertainty based data cleaning tool that creates a 'best estimate' surface for the soundings. The cube surface is then used to further QC the soundings. Some lines required swath editing or subset editing as well as automated filtering, especially in the shallow water areas (l91f1-l100f1). The final step in the workflow was to finalize the surface (at 2.5 m resolution) and export it from CARIS in XYZ format, which can then be imported to other programs.
Process_Date: 2010
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth A. Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700x2259
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov
Process_Step:
Process_Description:
In order to apply a tidal correction to the soundings, an offset from Mean Sea Level MSL) to Mean Lower Low Water (MLLW) (-0.676 m) was entered into the HYPACK configuration file for the RTK device (dev 0) setup prior to the survey. This value was calculated by setting a DGPS antenna on a number of survey stations around Buzzard's Bay and using the bench mark sheets in conjunction with the DGPS height calculations to determine the offset from MLLW to MSL. Calculated HYPACK RTK water level heights were then extracted from the raw HYPACK files using an AWK script (parseNovatelHypackTides.awk), which calculates the MLLW tide value for each Julian day of the survey. An offset of 2.9 meters was added to each calculated tide value (TID 0) to compensate for the RTK antenna to water line offset, and then the sign was inverted. Since HYPACK reports water level heights relative to MLLW, heights above the MLLW datum are reported as negative values because they are above the datum per standard surveying XYZ convention. The file resulting from running the AWK script produces a file of MLLW tidal height corrections formatted in the CARIS TID file format: YYYY/MM/DD HH:MM 0.00 where 0.00 is the correct water level height. The RTK heights were then merged into the processed CARIS depth soundings in the bathy processing workflow using the Tide load and Merge functions.
Process_Date: 2010
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth A. Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700 x2259
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov
Process_Step:
Process_Description:
The 2.5 meter tide corrected base surface that was finalized and exported from CARIS was gridded in ArcMap (version 9.3) using 3D Analyst - natural neighbors. An output cell-size of 2.5 meters was used, and NoData values were interpolated within the domain. A shapefile polygon representing the survey boundary was used to clip the grid to the extent of the data. Contours were then created from the interpolated grid using 3D Analyst - Surface Analysis - Contour. Contours were created every meter, and the base contour was -1.
Process_Date: 20110504
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Country: USA
Contact_Voice_Telephone: 508-548-8700 x2259
Contact_Facsimile_Telephone: 508-457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: String
Point_and_Vector_Object_Count: 5977
Raster_Object_Information:
Raster_Object_Type: pixel
Row_Count: 3194
Column_Count: 4866
Vertical_Count: 1

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Geographic:
Latitude_Resolution: 0.000001
Longitude_Resolution: 0.000001
Geographic_Coordinate_Units: Decimal degrees
Geodetic_Model:
Horizontal_Datum_Name: D_WGS_1984
Ellipsoid_Name: WGS_1984
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257224
Vertical_Coordinate_System_Definition:
Depth_System_Definition:
Depth_Datum_Name: Mean lower low water
Depth_Resolution: 0.1 meters
Depth_Distance_Units: meters
Depth_Encoding_Method: Implicit coordinate

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: ei_contours_1m_dd
Entity_Type_Definition: 1-m bathymetric contours
Entity_Type_Definition_Source: U.S. Geological Survey
Attribute:
Attribute_Label: FID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain:
Sequential unique whole numbers that are automatically generated.
Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Coordinates defining the features.
Attribute:
Attribute_Label: CONTOUR
Attribute_Definition: water depth
Attribute_Definition_Source: U.S. Geological Survey
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: -27
Range_Domain_Maximum: -1
Attribute_Units_of_Measure: meters
Attribute_Measurement_Resolution: 1

Distribution_Information:
Distributor:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth A. Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Rd.
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Contact_Voice_Telephone: (508) 548-8700x2259
Contact_Facsimile_Telephone: (508) 457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov
Resource_Description: Downloadable Data
Distribution_Liability:
Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: WinZip
Format_Version_Number: 14.5
Format_Information_Content:
This WinZip file contains a shapefile of bathymetric contours in the nearshore surrounding the Elizabeth Islands, MA, and the associated metadata.
File_Decompression_Technique: Use WinZip or pkUnzip
Transfer_Size: 10.0 MB
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name:
<https://pubs.usgs.gov/of/2011/1184/GIS_catalog/bathy/ei_contours_1m.zip>
Network_Resource_Name: <https://pubs.usgs.gov/of/2011/1184/html/GIS_catalog.html>
Access_Instructions: Data can be downloaded via the World Wide Web (WWW)
Offline_Option:
Offline_Media: DVD-ROM
Recording_Capacity:
Recording_Density: 4.75
Recording_Density_Units: Gbytes
Recording_Format: UDF
Fees: None
Technical_Prerequisites:
This zip file contains data available in Environmental Systems Research Institute (ESRI) polyline shapefile format. The user must have ArcGIS or ArcView 3.0 or greater software to read and process the data file. In lieu of ArcView or ArcGIS, the user may utilize another GIS application package capable of importing the data. A free data viewer, ArcExplorer, capable of displaying the data is available from ESRI at www.esri.com.

Metadata_Reference_Information:
Metadata_Date: 20111118
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Elizabeth A. Pendleton
Contact_Organization: U.S. Geological Survey
Contact_Position: Geologist
Contact_Address:
Address_Type: mailing and physical address
Address: 384 Woods Hole Road
City: Woods Hole
State_or_Province: MA
Postal_Code: 02543-1598
Country: USA
Contact_Voice_Telephone: 508-548-8700 x2259
Contact_Facsimile_Telephone: (508)-457-2310
Contact_Electronic_Mail_Address: ependleton@usgs.gov
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Access_Constraints: None
Metadata_Use_Constraints: None
Metadata_Extensions:
Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
Profile_Name: ESRI Metadata Profile

Generated by mp version 2.8.25 on Fri Nov 18 14:46:38 2011