Identification_Information: Citation: Citation_Information: Originator: U.S. Geological Survey (USGS), Pacific Coastal and Marine Science Center (PCMSC), Santa Cruz, CA. Publication_Date: 2014 Title: 2010 Digital Elevation Model (NAVD88) of Coyote Creek and Alviso Slough. Geospatial_Data_Presentation_Form: raster digital data Larger_Work_Citation: Citation_Information: Originator: U.S. Geological Survey (USGS), Pacific Coastal and Marine Science Center (PCMSC), Santa Cruz, CA. Publication_Date: 2014 Title: Bathymetry and Digital Elevation Models of Coyote Creek and Alviso Slough, South San Francisco Bay, California (Version 2, Revised March 2014) Edition: Version 2.0 Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: OF2011-1315 Online_Linkage: http://pubs.usgs.gov/of/2011/1315 Description: Abstract: 2-m resolution bathy/topo DEM of Coyote Creek and Alviso Slough in 2010. Projection = UTM, zone 10 in meters Horizontal Datum = NAD83 (NSRS2007) Vertical Datum = NAVD88, all units in meters. Three separate bathymetric surveys were conducted: the first (USGS Field Activity ID: S-2-10-SF) from January 13-15, 2010, the second (USGS Field Activity ID: S-18-10-SF) from September 11-13, 2010, and the third (USGS Field Activity ID: S-24-10-SF) on December 3, 2010. The combined bathymetric surveys consist of 220 survey lines covering an area of approximately 3.1 square km in waters depths ranging from about 1.0 m to -5.0 m NAVD88. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the bay. The bathymetry grid was resampled to 2m resolution and merged with a bare earth DEM generated from aerial topographic lidar collected by the USGS in 2010. The resulatant DEM includes elevations of the intertidal flats and adjacent topography. Purpose: To establish pre-restoration baseline bathymetry as part of the South Bay Salt Pond Restoration Project (http://www.southbayrestoration.org). Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20100113 Ending_Date: 20101203 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -122.060187436 East_Bounding_Coordinate: -121.974560855 North_Bounding_Coordinate: 37.4706742088 South_Bounding_Coordinate: 37.4231662547 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme_Keyword: geoscientificinformation Theme_Keyword: inlandWaters Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: GCMD SCIENCE PARAMETERS Theme_Keyword: OCEANS > BATHYMETRY > SEAFLOOR TOPOGRAPHY > BATHYMETRY Theme: Theme_Keyword_Thesaurus: GCMD INSTRUMENT PARAMETERS Theme_Keyword: SIDE-SCAN SONAR Theme_Keyword: GPS > Global Positioning System Theme_Keyword: LIDAR > Light Detection and Ranging Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: State of California Place_Keyword: San Francisco Bay Place_Keyword: Alameda County Place_Keyword: Santa Clara County Place_Keyword: Alviso Place_Keyword: Coyote Creek Place_Keyword: Alviso Slough Place_Keyword: Guadalupe Slough Access_Constraints: If physical samples or materials are available, constraints on their on-site access are described in "WR CMG Sample Distribution Policy" at URL: http://walrus.wr.usgs.gov/infobank/programs/html/main/sample-dist-policy.html Use_Constraints: This information is not intended for navigational purposes. Read and fully comprehend the metadata prior to data use. Uses of these data should not violate the spatial resolution of the data. Where these data are used in combination with other data of different resolution, the resolution of the combined output will be limited by the lowest resolution of all the data. Acknowledge the U.S. Geological Survey in products derived from these data. Share data products developed using these data with the U.S. Geological Survey. This database has been approved for release and publication by the Director of the USGS. Although this database has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use. Although this Federal Geographic Data Committee-compliant metadata file is intended to document these data in nonproprietary form, as well as in ArcInfo format, this metadata file may include some ArcInfo-specific terminology. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Pacific Coastal and Marine Science Center Contact_Person: David P Finlayson Contact_Position: Operational Geologist Contact_Address: Address_Type: physical address Address: 400 Natural Bridges Drive City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: USA Contact_Voice_Telephone: (831) 460-7557 Contact_Facsimile_Telephone: (831) 427-4748 Contact_Electronic_Mail_Address: dfinlayson@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: Browse_Graphic_File_Description: Image showing S-2-10-SF survey tracklines. Browse_Graphic_File_Type: JPEG Browse_Graphic: Browse_Graphic_File_Name: Browse_Graphic_File_Description: Image showing S-18-10-SF survey tracklines. Browse_Graphic_File_Type: JPEG Browse_Graphic: Browse_Graphic_File_Name: Browse_Graphic_File_Description: Image showing S-24-10-SF survey tracklines. Browse_Graphic_File_Type: JPEG Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: This bathymetric data has not been independently verified for accuracy. Logical_Consistency_Report: All bathymetric values are derived from the same instruments and processing workflow. Completeness_Report: The raw bathymetry data was filtered in SEA Swath Processor and imported into CARIS HIPS and SIPS for post-processing. Within CARIS a swath angle BASE (Bathymetric with Associated Statistical Error) surface was created at 1 m resolution and the subset editor used to manually eliminate any remaining outliers or artifacts. The average depth within each 1 by 1 m cell was exported as an ASCII text file and imported into Surfer for interpolation using a linear kriging algorithm with a 1-simga nugget of 0.05 m and a 5 by 5 m search radius. The resultant grid was exported to ESRI ArcMap software for display and merging with topographic lidar data. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Uncertainty in the horizontal position of each sounding is a function of the total uncertainty propagated through each of the following component instruments: 1) base station GPS, 2) vessel GPS, 3) intertial motion unit (IMU), 4) water sound velocity model, and 5) beam spreading in the water column. Assuming no systematic errors in the measurement instruments themselves, beam spreading is the dominate source of positional uncertainty. The 1-degree sonar beam of the SWATHplus-M results in horizontal uncertainty ranging from 0.10 m at 10 m slant range, to about 0.45 m at 50 m slant range. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: After filtering the data to remove obvious outliers, the standard deviation of the remaining sounding elevations was calculated for each 1 m by 1 m cell (each containing 19 soundings on average) in CARIS. The mean of the standard deviation for all cells in the survey is 0.05 m and 97% of the cells in the data set have a standard deviation of less than 0.15 m. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey, Coastal and Marine Geology Program Publication_Date: 2011 Title: USGS CMG Field Activity S-2-10-SF Geospatial_Data_Presentation_Form: raster digital data Online_Linkage: Type_of_Source_Media: online Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20100113 Ending_Date: 20100115 Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: S-2-10-SF Source_Contribution: This 2010 field activity collected bathymetric data in San Francisco Bay. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey, Coastal and Marine Geology Program Publication_Date: 2011 Title: USGS CMG Field Activity S-18-10-SF Geospatial_Data_Presentation_Form: raster digital data Online_Linkage: Type_of_Source_Media: online Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20100911 Ending_Date: 20100913 Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: S-18-10-SF Source_Contribution: This 2010 field activity collected bathymetric data in San Francisco Bay. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey, Coastal and Marine Geology Program Publication_Date: 2011 Title: USGS CMG Field Activity S-24-10-SF Geospatial_Data_Presentation_Form: raster digital data Online_Linkage: Type_of_Source_Media: online Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20101203 Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: S-24-10-SF Source_Contribution: This 2010 field activity collected bathymetric data in San Francisco Bay. Process_Step: Process_Description: Sonar Data Collection The bathymetric surveys were conducted using a 234.5 kHz SEA (Systems Engineering & Assessment Ltd) SWATHplus-M phase-differencing sidescan sonar. The sonar was pole-mounted on the 34-foot USGS mapping vessel R/V Parke Snavely, and affixed to a hull brace. Real-time kinematic (RTK) GPS position data were passed through a CodaOctopus F180 intertial measurement unit (IMU) to the sonar hardware and data collection software. Sonar heads, GPS antennae, and the IMU were surveyed in place to a common reference frame with a Geodimeter 640 Total Station. The R/V Snavely was outfitted with three networked workstations and a navigation computer for use by the captain and survey crew for data collection and initial processing. Process_Date: 2010 Process_Step: Process_Description: Geodetic Control Geodetic control for the survey was established using a shore based Global Positioning System (GPS) base station broadcasting Real Time Kinematic (RTK) corrections to the survey vessel via UHF radio link. The base station was located at Moffett Naval Air Station, on a pre-existing benchmark identified as ARC 34. The NGS lists this monument as PID DG6881 (See Appendix A in report for NGS Datasheet). GPS base station coordinates: Reference Frame: NAD83 (NSRS2007) Epoch Date: 2007.00 Latitude: N 37 degrees 25' 34.57880" Longitude: W 122 degrees 02' 05.53373" Orthometric Height: 1.280 m (NAVD88 height modernization project elevation) Process_Date: 2010 Process_Step: Process_Description: Vessel Position and Attitude The R/V Snavely was equipped with a CodaOctopus F180 attitude and positioning system for the duration of the survey. The F180 is running F190 firmware, and receives real-time kinematic (RTK) corrections directly. The RTK GPS data (2 cm error ellipse) are combined with the inertial motion measurements directly within the F190 hardware so that high-precision position and attitude corrections are fed in real-time to the sonar acquisition equipment. The NAD83 (NSRS2007) Epoch 20007.00 3-dimensional reference frame was used for all data acquisition. Process_Date: 2010 Process_Step: Process_Description: Sound Velocity Measurements Sound velocity measurements were collected continuously with an Applied Micro Systems Micro SV deployed on the transducer frame for real-time sound velocity adjustments at the transducer-water interface. The Micro SV is accurate to +/- 0.03 m/s. In addition, sound velocity profiles (SVP) were collected with an Applied Micro Systems, SvPlus 3472. This instrument provides time-of-flight sound-velocity measurements by using invar rods with a sound-velocity accuracy of +/- 0.06 m/s, pressure measured by a semiconductor bridge strain gauge to an accuracy of 0.15 percent (Full Scale) and temperature measured by thermistor to an accuracy of 0.05 degrees Celsius (Applied Microsystems Ltd., 2005). Process_Date: 2010 Process_Step: Process_Description: Sonar Sounding Processing GPS data and measurements of vessel motion are combined in the F180 hardware to produce a high-precision vessel attitude packet. This packet is transmitted to the Swath Processor acquisition software in real-time and combined with instantaneous sound velocity measurements at the transducer head before each ping. Up to 20 pings per second are transmitted with each ping consisting of 2048 samples per side (port and starboard). The returned samples are projected to the seafloor using a ray-tracing algorithm working with the previously measured sound velocity profiles in SEA Swath Processor (version 3.05.18.04). A series of statistical filters are applied to the raw samples that isolate the seafloor returns from other uninteresting targets in the water column. Finally, the processed data is stored line-by-line in both raw (.sxr) and processed (.sxp) trackline files. Processed (.sxp) files were further processed with sxpegn (build 151) by Amy Foxgrover (USGS) to remove erroneous data from the files and make valid gain-normalized amplitude data for processing backscatter data. Process_Date: 2011 Process_Step: Process_Description: Bathymetry Digital Elevation Model Production The raw bathymetry data was filtered in SEA Swath Processor and imported into CARIS HIPS and SIPS for post-processing. Within CARIS a swath angle BASE (Bathymetric with Associated Statistical Error) surface was created at 1 m resolution and the subset editor used to manually eliminate any remaining outliers or artifacts. The average depth within each 1 by 1 m cell was exported as an ASCII text file and imported into Surfer for interpolation using a linear kriging algorithm with a 1-simga nugget of 0.05 m and a 5 by 5 m search radius. The resultant grid was exported to ESRI ArcMap software for display and merging with topographic lidar data. Process_Date: 20110701 Process_Step: Process_Description: Topo/Bathy Digital Elevation Model Production Within ArcMap the bathymetry grid was resampled to 2 m resolution using a bilinear interpolation to match the bare earth lidar DEM provided by the USGS. The bathymetry was then merged with the topographic lidar using the blend algorithm in the "Mosaic to New Raster" tool in Arc Toolbox. The resultant DEM is provided at 2-m resolution with elevations relative to NAVD88. The USGS aerial lidar was collected between June 11th and November 7th of 2010 using a Piper Navajo twin engine aircraft equipped with a 100 kHz Optech ALTM 3100EA lidar system. Acquisition was designed to support a nominal point spacing of 1 meter and collected at low tide to optimize coverage of the intertidal flats. Lidar data was processed by Dewberry to achieve a bare earth ground surface and provided as 2-m resolution hydro-flattened grids. When Dewberry compared the lidar to survey grade GPS points in generally flat, non-vegetated areas, the vertical accuracy of 95% of the positions had errors less than or equal to 18 cm (equivalent to a 9 cm RMSE if evenly distributed). The lidar is projected in UTM coordinate space, zone 10. The vertical datum is NAVD88 and the horizontal datum NAD83 (NSRS2007). For additional information on USGS's ARRA San Francisco Coastal Lidar project or to download the data directly, visit http://lidar.cr.usgs.gov/. The lidar was produced for the USGS according to specific project requirements. This information is provided "as is". Further documentation of this data can be obtained by contacting: USGS/NGTOC, 1400 Independence Road, Rolla, MO 65401. Telephone (573) 308-3612 Process_Date: 20110701 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Robert Kelly Contact_Position: USGS NGTOC Contact_Address: Address_Type: mailing and physical address Address: 1400 Independence Road City: Rolla State_or_Province: MO Postal_Code: 65401 Country: USA Contact_Voice_Telephone: (573) 308-3612 Contact_Electronic_Mail_Address: ckelly@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: raster Raster_Object_Information: Raster_Object_Type: grid cell Row_Count: 2767 Column_Count: 4072 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 10 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -123 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 2.0 Ordinate_Resolution: 2.0 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 (NSRS2007) Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 298.257 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum 1988 (NAVD88) Altitude_Resolution: 0.01 Altitude_Distance_Units: meters Altitude_Encoding_Method: Attribute values Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: Altitude Entity_Type_Definition: Orthometric Altitude (elevation) relative to NAVD88 in meters. Values are positive up. Entity_Type_Definition_Source: NA Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center (PCMSC) Contact_Person: David P Finlayson Contact_Address: Address_Type: mailing and physical address Address: 400 Natural Bridges Drive City: Santa Cruz State_or_Province: CA Postal_Code: 95060-5792 Country: US Contact_Voice_Telephone: (831) 460-7557 Contact_Facsimile_Telephone: (831) 427-4748 Contact_Electronic_Mail_Address: dfinlayson@usgs.gov Resource_Description: Downloadable Data Distribution_Liability: This information is not intended for navigational purposes. This database has been approved for release and publication by the Director of the USGS. Although this database has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ESRI ASCII Grid Format_Version_Number: 1.0 Format_Information_Content: The ASCII file consists of header information containing a set of keywords, followed by cell values in row-major order. The file format is: > > > > > > >{NODATA_VALUE xxx} >row 1 >row 2 >. >. >. >row n > where xxx is a number, and the keyword nodata_value is optional and defaults to -9999. Row 1 of the data is at the top of the grid, row 2 is just under row 1 and so on. The nodata_value is the value in the ASCII file to be assigned to those cells whose true value is unknown. In the grid they will be assigned the keyword NODATA. Cell values are be delimited by spaces. No carriage returns are necessary at the end of each row in the grid (although they are included in this case). The number of columns in the header is used to determine when a new row begins. The number of cell values is equal to the number of rows times the number of columns. Transfer_Size: 30 MB Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://pubs.usgs.gov/of/2011/1315/ Fees: No cost Metadata_Reference_Information: Metadata_Date: 2014 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Amy Foxgrover Contact_Address: Address_Type: mailing address Address: 400 Natural Bridges Drive City: Santa Cruz State_or_Province: California Postal_Code: 95060 Country: USA Contact_Voice_Telephone: (831) 460-7561 Contact_Electronic_Mail_Address: afoxgrover@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998