Identification_Information: Citation: Citation_Information: Originator: Christopher G. Smith Originator: Marci E. Marot Originator: Alisha M. Ellis Originator: Cathryn J. Wheaton Originator: Julie C. Bernier Originator: C. Scott Adams Publication_Date: 20150501 Title: Assateague Island surface and subsurface sediment physical parameters data from the spring and fall sampling trips of 2014 Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: 2015-1169 Online_Linkage: http://dx.doi.org/10.3133/ofr20151169 Larger_Work_Citation: Citation_Information: Originator: Christopher G. Smith Originator: Marci E. Marot Originator: Alisha M. Ellis Originator: Cathryn J. Wheaton Originator: Julie C. Bernier Originator: C. Scott Adams Publication_Date: 20150501 Title: Sedimentological and radiochemical characteristics of marsh deposits from Assateague Island and adjacent vicinity, Maryland and Virginia, following Hurricane Sandy Edition: 1.0 Geospatial_Data_Presentation_Form: multimedia presentation Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: 2015-1169 Publication_Information: Publication_Place: St. Petersburg, Florida Publisher: U.S. Geological Survey - St. Petersburg Coastal and Marine Science Center Online_Linkage: http://dx.doi.org/10.3133/ofr20151169 Description: Abstract: The influence of tropical and extratropical cyclones on coastal wetlands and marshes is highly variable in both space and time and depends on a number of climatic, geologic, and physical variables. The impacts storms can be either positive or negative with respect to the wetland and marsh ecosystems. Small to moderate amounts of inorganic sediment added during storms or other events helps to abate pressure from sea-level rise. However, if the volume of sediment is large and the resulting deposits thick, the organic substrate may compact causing submergence and a loss in elevation. Similarly, thick deposits of coarse inorganic sediment may also alter the hydrology of the site and impede vegetative processes. Alternative impacts associated with storms include shoreline erosion at the marsh edge as well as potential emergence. Predicting the outcome of these various responses and potential long-term implications can be obtained from a systematic assessment of both historical and recent event deposits. The objectives of this study are to 1) characterize the surficial sediment of the relict to recent washover fans and back-barrier marshes, and 2) characterize the sediment of 6 marsh cores from the back-barrier marshes and a single marsh island core near the mainland. These geologic data will be integrated with other remote sensing data collected along Assateague Island, Maryland / Virginia and assimilated into an assessment of coastal wetland response to storms. Purpose: The file includes all bulk lithologic analysis results from marsh and sandy overwash surface sediments collected on Assateague Island and the mainland of Maryland and Virginia in March/April and October 2014 by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center. Supplemental_Information: This publication contains data for two field activities conducted in 2014: Spring March 26 – April 4, 2014; and fall October 21 – 30, 2014. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20140326 Ending_Date: 20141030 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -75.46667 East_Bounding_Coordinate: -75.11111 North_Bounding_Coordinate: 38.26667 South_Bounding_Coordinate: 37.82222 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: marsh Theme_Keyword: sediment Theme_Keyword: surface Theme_Keyword: physical parameters Theme_Keyword: water content Theme_Keyword: dry bulk density Theme_Keyword: porosity Theme_Keyword: loss on ignition Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: Maryland Place_Keyword: Virginia Place_Keyword: Assateague Island Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: sediment Stratum_Keyword: surface Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: March 2014 Temporal_Keyword: April 2014 Temporal_Keyword: October 2014 Access_Constraints: none Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Position: Research Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: US Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Data_Set_Credit: U.S. Geological Survey Native_Data_Set_Environment: Microsoft Windows Server 2008 R2 Version 6.1 (Build 7601XXXXX) Service Pack 1; Microsoft Excel Version 2010 Use_Constraints: The U.S. Geological Survey requests that it be referenced as the originator of this dataset in any future products or research derived from these data. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The physical parameters reported in the tables were analyzed at the USGS SPCMSC sedimentology lab. These lithologic data have not been independently verified for accuracy. Replicate analyses of loss on ignition are reported for quality assurance. Logical_Consistency_Report: The data includes sample ID, date collected, water content, dry bulk density, porosity, and loss on ignition. Completeness_Report: This is a complete processed physical parameters data file for the spring and fall Assateague Island surficial sediment seasonal comparison archive. Lineage: Process_Step: Process_Description: In the field, the top 1-centimeter of undisturbed surface material was subsampled for sediment characterization, placed in individual storage bags, and stored on ice. The surface samples were transported to the USGS SPCMSC. Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Position: Research Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Process_Step: Process_Description: In the laboratory, samples were homogenized in the sample bag and a subsample of each 1-cm interval was processed for basic sediment characteristics (dry bulk density and porosity). Water content, porosity and dry bulk density were determined using water mass lost during drying. Approximately 20 – 30 milliliters (mL) of each wet subsample was packed into a graduated syringe with 0.5 mL resolution. The wet sediment was then extracted into a pre-weighed aluminum tray and the weight of the wet sediment was recorded. The wet sediment and tray were placed in a drying oven for approximately 48 hours at 60°C. Water content (θ ) was determined as the mass of water (mass lost when dried) relative to the initial wet sediment mass. Porosity was estimated from the report equation in the document. Salt-mass contributions were removed from the porosity values under the assumption that pore water salinity was equivalent to average salinity of 25. Dry bulk density was calculated from the report equation in the document. Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Position: Research Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Process_Step: Process_Description: Organic matter (OM) content was determined using a similar mass loss technique, commonly referred to as loss on ignition (LOI). The dry sediment from the processing described above was homogenized using a porcelain mortar and pestle. Approximately 1 – 5 grams (g) of dry sediment was placed into a pre-weighed porcelain crucible. The mass of the dried sediment was recorded with an analytical balance to a precision of 0.01 g. The samples were then placed into a laboratory muffle furnace with stabilizing temperature control. The furnace was ramped to 110°C over a 30 minute interval and then held at 110°C for 2 hours. Samples were removed and weighed to determine excess moisture loss. Samples were then placed back in the furnace. The furnace was then ramped to 550°C over a 30 minute interval and then held at 550°C for 6 hours. The furnace temperature was then lowered to 60°C and held at this temperature until the sediments could be reweighed. The latter step prevents the absorption of moisture, which can affect the measurement. Samples were reweighed using the same balance and to a precision of 0.01 g. The mass lost during the 6 hour baking period relative to the initial dry mass is used as a metric of OM content (modified from Dean, 1974). Data are reported as a ratio of mass (milligrams, mg) of organic matter to mass (g) of dry sediment (post-110 oC drying). Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Position: Research Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: 14CTB_Spring&Fall2014_Surface Sediment_Physical Data.xlsx, 14CTB_Marsh Core Physical Data.xlsx,14CTB_71R Auger Core Physical Data.xlsx Entity_Type_Definition: Physical lithological parameter results of surface sediment collected on Assateague Island and the mainland of Maryland and Virginia. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Sample ID Attribute_Definition: Sample identification number Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Character string Attribute: Attribute_Label: Date Collected Attribute_Definition: The date the sample was collected Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 03/26/2014 Range_Domain_Maximum: 10/26/2014 Attribute: Attribute_Label: Depth (cm) Attribute_Definition: Sample identification number Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Character string Attribute: Attribute_Label: Water Content (g-water/g-wet) Attribute_Definition: The ratio of mass of water to the mass of wet sediment in the individual sample interval, measured in grams of water per grams of wet sediment Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 0.92 Attribute: Attribute_Label: Dry Bulk Density (g/cm^3) Attribute_Definition: Dry bulk density of the sediment measured in grams per cubic centimeter. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.08 Range_Domain_Maximum: 1.66 Attribute: Attribute_Label: Porosity Attribute_Definition: Porosity in each sample interval measured in cubic centimeter of void space per cubic centimeter of wet sediment. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.42 Range_Domain_Maximum: 0.97 Attribute: Attribute_Label: Loss On Ignition (g-OM/g-dry) Attribute_Definition: The ratio of the mass of organic matter combusted at 450 Celsius to the pre-combusted mass of dry sediment measured in grams of organic matter to grams of dry sediment. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0003 Range_Domain_Maximum: 0.6458 Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Distribution_Liability: This publication was prepared by an agency of the United States Government. Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of the data on any other system, nor shall the act of distribution imply any such warranty. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Standard_Order_Process: Fees: none Digital_Form: Digital_Transfer_Information: Format_Name: Zip archive Format_Version_Number: 1 Format_Specification: .zip Transfer_Size: 0.081 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://pubs.er.usgs.gov/publication/ofr20151169/data/14CTB_Physical_Data.zip Resource_Description: Downloadable data Custom_Order_Process: none Technical_Prerequisites: These spreadsheets included in this .zip file were created for use with Microsoft Excel 2010. They may also be viewed with the Microsoft Excel viewer or by downloading a Microsoft Compatibility Pack to view with older versions of Microsoft Excel. The .zip file also contains comma delimited files (.csv) of the physical parameter data for surface and subsurface sediments. The .csv data files contains the tabular data in plain text and may be viewed with a standard text editor. Metadata_Reference_Information: Metadata_Date: 20150501 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Christopher G. Smith Contact_Position: Research Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: cgsmith@usgs.gov Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: none Metadata_Security_Information: Metadata_Security_Classification_System: None Metadata_Security_Classification: Unclassified Metadata_Security_Handling_Description: None Metadata_Use_Constraints: The U.S. Geological Survey requests that it be referenced as the originator of this dataset in any future products or research derived from these data.