J.M. Meyers 1996 I evaluated 3 radio transmitter attachments and designs for adult parrots. Two of the transmitters and attachments were similar to those used previously in the study on fledgling and adult parrots. I designed, in collaboration with the manufacturer, a third transmitter and attachment that provided protection of key areas from chewing and eventual destruction of the attachment or transmitter. This design was used successfully to radio-track parrots an average of 43.4 weeks (range = 35.9-51.6 weeks). It was the only transmitter of the 3 tested to operate without failure (>36 weeks) caused by chewing damage to the transmitter, antenna, collar, or attachment mechanism (Fisher's exact test, 3 df, P = 0.0003). Its adjustable collar, made from 59 kg-test stainless steel wire covered with plastic heat-shrink tubing, was sturdy and easy to apply. Transmitters for parrots should be enclosed in a protective metal case (brass) and have metal crimped tubes (brass or copper) protecting key areas, such as the base of the antenna and mechanism for attachment of the collar. application/pdf en U.S. Fish and Wildlife Service Evaluation of 3 radio transmitters and collar designs for Amazona article