Daniel J. Goode 1999 <p>MOC3D is a general-purpose computer model developed by the U.S. Geological Survey (USGS) for simulation of three-dimensional solute transport in ground water (Konikow and others, 1996). The model is an update to the widely used USGS two-dimensional solute-transport model (MOC) and is implemented as an optional “package” for the ground-water flow model MODFLOW (Harbaugh and McDonald, 1996). Directly coupling the time-tested MOC transport algorithms with the widely used MODFLOW program makes MOC3D a powerful tool for simulation of solute transport in ground water in many hydrogeologic settings. The model simulates transport processes that include:</p><ul><li>Advection - Transport of dissolved solutes at the same rate as the average ground-water flow velocity.</li><li>Diffusion - Spreading of solute from areas of high concentration to areas of low concentration, caused by “random” molecular motion</li><li>Dispersion - Diffusion-like spreading of solute that is caused primarily by spatial variability in aquifer properties, which results in spatial variability in transport velocity.</li><li>Retardation - Reduction in the apparent solute velocity, compared to the ground-water velocity, caused by linear equilibrium sorption on aquifer materials.</li><li>Decay - Disappearance of solute caused by reactions such as radioactive decay or biodegradation that are proportional to concentration.</li><li>Growth - Creation (or disappearance) of solute mass caused by reactions that proceed independent of the solute concentration, such as some cases of biodegradation</li><li>Double-porosity exchange - rate-limited exchange of solute mass between mobile and immobile zones; for example, between fractures and the rock matrix.</li></ul> application/pdf 10.3133/fs08699 en U.S. Geological Survey Simulating contaminant attenuation, double-porosity exchange, and water age in aquifers using MOC3D reports