David A. Lockner K. Iwata H. Tanaka J.D. Byerlee Diane E. Moore 2001 The frictional strength of brucite gouge has been measured at hydrothermal conditions to 450°C. At room temperature, brucite has a coefficient of friction, μ ≈ 0.30, making it one of the weakest minerals identified to date. With increasing temperature at a constant effective normal stress, the coefficient of friction of brucite decreases to a minimum of μ ≈ 0.20 near 300°C, and μ ≈ 0.22–0.24 in the temperature range 350–450°C. Brucite has a sheeted crystal structure, and its low frictional strength may be attributed to the relatively weak bonds between the layers. In addition, the temperature dependence of μ to ≈300°C can be explained in terms of the anomalously large coefficient of thermal expansion of brucite, which will further weaken the interlayer bonds. Brucite is a common constituent of serpentinite, and at ≈300°C, where brucite is weakest, all the major serpentine minerals have μ ≥ 0.5. The maximum expected brucite content of a serpentinite is close to 20% by weight or volume. That amount of disseminated brucite will lower the coefficient of friction of serpentinite by ≤10–15% in the deeper parts of the seismogenic zone. However, the effect will be much greater if shear can be concentrated along brucite-lined slip surfaces in the serpentinite body. application/pdf 10.3133/ofr01320 en U.S. Geological Survey How brucite may affect the frictional properties of serpentinite reports