<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:contributor>J. E. Terry</dc:contributor>
  <dc:creator>A. H. Ludwig</dc:creator>
  <dc:date>1979</dc:date>
  <dc:description>Proposed construction of a series of locks and dams in the Red River in Louisiana will cause a permanent increase in average river stage. The potentiometric surface of the shallow alluvial aquifer and the water table in the fine-grained material confining the aquifer will be affected. The purpose of this study, using digital-modeling techniques, was to predict the average postconstruction potentiometric surface (steady state) and the water table (nonsteady state) so that potential effects of the water-level changes could be evaluated. Plans for lock and dam 3 at realined mile 111 (kilometer 179) above the mouth of the Red River call for a pool elevation of 87 feet (27 meters) and will cause an average increase in river stage ranging from 21 to 3.5 feet (l.4 to 1.1 meters). As a result, ground-water levels will be raised to near land surface in low areas east of the river from the damsite to Aloha and in a 0.5-mile (0.8-kilometer) strip along the west side extending 9 miles (14 kilometers) above the dam. The potentiometric surface may be above land surface locally near the dam. The magnitude of ground-water-level fluctuations near the river will be reduced to less than half the preconstruction range.</dc:description>
  <dc:format>application/pdf</dc:format>
  <dc:identifier>10.3133/ofr79920</dc:identifier>
  <dc:language>en</dc:language>
  <dc:publisher>U.S. Geological Survey</dc:publisher>
  <dc:title>Preconstruction and postconstruction ground-water levels, Lock and Dam 3, Red River Valley, Louisiana</dc:title>
  <dc:type>reports</dc:type>
</oai_dc:dc>