<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:contributor>D. Kirk Nordstrom</dc:contributor>
  <dc:contributor>Kirk M. Cunningham</dc:contributor>
  <dc:contributor>Martin A. Schoonen</dc:contributor>
  <dc:contributor>Yong Xu</dc:contributor>
  <dc:contributor>Jennifer M. DeMonge</dc:contributor>
  <dc:creator>James W. Ball</dc:creator>
  <dc:date>1998</dc:date>
  <dc:description>Forty-two water analyses are reported for samples collected at 8 hot springs and their&#13;
overflow drainages, two geysers, and two ambient-temperature acid streams in Yellowstone National&#13;
Park during 1994-95. These water samples were collected and analyzed as part of the initial&#13;
research investigations on sulfur redox speciation in the hot springs of Yellowstone and to document&#13;
chemical changes in overflows that affect major ions, redox species, and trace elements. The sulfur&#13;
redox speciation research is a collaboration between the State University of New York (SUNY) at&#13;
Stony Brook and the U.S. Geological Survey (USGS). Four hot springs, Ojo Caliente, Azure, Frying&#13;
Pan, and Angel Terrace, were studied in detail. Analyses were performed adjacent to the sampling&#13;
site or in an on-site mobile lab truck constructed by the USGS, or later in a USGS laboratory.&#13;
Water temperature, specific conductance, pH, Eh, D.O., and dissolved H2S were determined&#13;
adjacent to the sample source at the time of sampling. Alkalinity and F- were determined on-site on&#13;
the day of sample collection. Thiosulfate and polythionates were determined as soon as possible&#13;
(minutes to hours later) by ion chromatography (IC). Other major anions (Cl-, SO4&#13;
2-, Br-) also were&#13;
determined on-site by IC within two days of sample collection. Ammonium, Fe(II), and Fe(total)&#13;
were determined on-site by ultraviolet/visible spectrophotometry within two days of sample&#13;
collection. Later in the USGS laboratory, densities were determined. Concentrations of Ca, Mg,&#13;
Li, Na, and K were determined by flame atomic absorption and emission (Na, K) spectrometry.&#13;
Concentrations of Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe(total), K, Mg, Mn, Na, Ni, Pb, Si, Sr,&#13;
V, and Zn were determined by inductively-coupled plasma optical emission spectrometry. Trace&#13;
concentrations of Al and Mg were determined by Zeeman-corrected graphite furnace atomic&#13;
absorption spectrometry.&#13;
Three important conclusions from the sampling and analyses are: (1) variability in H2S&#13;
concentrations can be caused as much by sampling and preservation artifacts as by actual variations&#13;
in water composition over time, (2) historical determinations of S2O3&#13;
2- were subject to&#13;
overestimation, most likely because of inadequate preservation leading to H2S oxidation, and (3)&#13;
S2O3&#13;
2- is a common constituent of hot spring waters.</dc:description>
  <dc:format>application/pdf</dc:format>
  <dc:identifier>10.3133/ofr98574</dc:identifier>
  <dc:language>en</dc:language>
  <dc:publisher>U.S. Geological Survey</dc:publisher>
  <dc:title>Water-chemistry and on-site sulfur-speciation data for selected springs in Yellowstone National Park, Wyoming, 1994-1995</dc:title>
  <dc:type>reports</dc:type>
</oai_dc:dc>