<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:creator>S. P. Garabedian</dc:creator>
  <dc:date>1992</dc:date>
  <dc:description>The occurrence and movement of water in the regional aquifer 
system that underlies the eastern Snake River Plain, Idaho, de- 
pend on the transmissivity and storage capacity of rocks that 
compose the geologic framework and on the distribution and 
amount of recharge and discharge of water within that frame- 
work. On a regional scale, most water moves horizontally through 
interflow zones in Quaternary basalt of the Snake River Group. 
In recharge and discharge areas, water also moves vertically 
along joints and interfingering edges of basalt flows. Aquifer 
thickness is largely unknown, but geophysical studies suggest 
that locally the Quaternary basalt may exceed several thousand 
feet. Along the margins of the plain, sand and gravel several 
hundred feet thick transmit large volumes of water.
Regional ground-water movement is generally from northeast 
to southwest, from areas of recharge to areas of discharge. Re- 
charge is from seepage of surface water used for irrigation, 
stream and canal losses, underflow from tributary drainage ba- 
sins, and infiltration of precipitation. Aquifer discharge is largely 
spring flow to the Snake River and water pumped for irrigation. 
Major springs are near American Falls Reservoir and along the 
Snake River from Milner Dam to King Hill.
Regional ground-water flow was simulated with numerical 
models. Initially, a two-dimensional steady-state model that in- 
cluded a nonlinear, least-squares regression technique was used 
to estimate aquifer properties. Later, a three-dimensional steady- 
state and transient model was used to replace the two-dimen- 
sional model. Three-dimensional model results indicated that 
average total transmissivity ranged from about 0.05 to 120 feet 
squared per second and vertical leakance ranged from about 
3 x 10&lt;sup&gt;-10&lt;/sup&gt; to 5 x 10&lt;sup&gt;-6&lt;/sup&gt; feet per second per foot of aquifer thickness.
The three-dimensional transient model was used to compare 
measured and estimated long-term changes in ground-water dis- 
charge and water levels with simulated values. Initial head con- 
ditions used in transient simulations were derived from a 
steady-state solution of estimated preirrigation hydrologic condi- 
tions. Transient simulations were 5-year stress periods beginning 
in 1891 and ending in 1980. Recharge for each stress period from 
1926 to 1980 was estimated from surface-water irrigation, pre- 
cipitation, and streamflow records. Recharge for stress periods 
from 1891 to 1925 was based on the average value for stress peri- 
ods from 1926 to 1980 and was indexed to estimated irrigated 
acreages. Average annual tributary drainage-basin underflow for 
stress periods from 1891 to 1910 was calculated by using basin- 
yield equations. Underflow for stress periods from 1911 to 1980 
was varied by use of streamflow records.
Transient simulations reasonably approximated measured 
changes in aquifer head and ground-water discharge that re- 
sulted from use of surface water for irrigation. Irrigation with 
surface water peaked in about 1950; subsequent increases in irri- 
gation have been supplied largely by ground water. The three-
dimensional model simulated water-level declines and reduced 
ground-water discharge caused in part by increases in ground- 
water pumping.
The transient model was used to simulate aquifer changes 
from 1981 to 2010 in response to three hypothetical development 
alternatives: (1) Continuation of 1980 hydrologic conditions, (2) 
increased pumpage, and (3) increased recharge. Simulation of 
continued 1980 hydrologic conditions for 30 years indicated that 
head declines of 2 to 8 feet might be expected in the central part 
of the plain. The magnitude of simulated head declines was con- 
sistent with head declines measured during the 1980 water year. 
Larger declines were calculated along model boundaries, but 
these changes may have resulted from underestimation of tribu- 
tary drainage-basin underflow and inadequate aquifer definition. 
Simulation of increased ground-water pumpage (an additional 
2,400 cubic feet per second) for 30 years indicated head declines 
of 10 to 50 feet in the central part of the plain. These relatively 
large head declines were accompanied by increased simulated 
river leakage of 50 percent and decreased spring discharge of 20 
percent. The effect of increased recharge (800 cubic feet per sec- 
ond) for 30 years was a rise in simulated heads of 0 to 5 feet in 
the central part of the plain.</dc:description>
  <dc:format>application/pdf</dc:format>
  <dc:identifier>10.3133/pp1408F</dc:identifier>
  <dc:language>en</dc:language>
  <dc:publisher>U.S. Government Printing Office</dc:publisher>
  <dc:title>Hydrology and digital simulation of the regional aquifer system, eastern Snake River Plain, Idaho</dc:title>
  <dc:type>reports</dc:type>
</oai_dc:dc>