Browse the USGS Publication Warehouse

Publications for publication type Article and publication subtype Journal Article

Investigating the influence of nitrate nitrogen on post-smolt Atlantic salmon Salmo salar reproductive physiology in water recirculation aquaculture systems, 2017, Aquacultural Engineering (78) - Part A
Performance and application of a fluidized bed limestone reactor designed for control of alkalinity, hardness and pH at the Warm Springs Regional Fisheries Center, 2017, Aquacultural Engineering (77) -
Comparison of hydraulics and particle removal efficiencies in a mixed cell raceway and Burrows pond rearing system, 2016, Aquacultural Engineering (74) -
Phosphorus removal from aquaculture effluents at the Northeast Fishery Center in Lamar, Pennsylvania using iron oxide sorption media, 2016, Aquacultural Engineering (72-73) -
Application of a fluidized bed reactor charged with aragonite for control of alkalinity, pH and carbon dioxide in marine recirculating aquaculture systems, 2016, Aquacultural Engineering (70) -
Carbon dioxide stripping in aquaculture -- part II: development of gas transfer models, 2012, Aquacultural Engineering (47) -
Carbon dioxide stripping in aquaculture -- part III: model verification, 2012, Aquacultural Engineering (47) -
Carbon dioxide stripping in aquaculture. part 1: terminology and reporting, 2012, Aquacultural Engineering (47) -
Comparative performance of CO₂ measuring methods: marine aquaculture recirculation system application, 2011, Aquacultural Engineering (44) - 1
Modeling Carbon Dioxide, pH and Un-Ionized Ammonia Relationships in Serial Reuse Systems, 2009, Aquacultural Engineering (40) - 1
Modeling carbon dioxide, pH, and un-ionized ammonia relationships in serial reuse systems, 2009, Aquacultural Engineering (40) - 1
Use of avoidance response by rainbow trout to carbon dioxide for fish self-transfer between tanks, 2007, Aquacultural Engineering (37) - 3
Minimizing noise in fiberglass aquaculture tanks: Noise reduction potential of various retrofits, 2007, Aquacultural Engineering (37) - 2
Design of a computerized, temperature-controlled, recirculating aquaria system, 2006, Aquacultural Engineering (35) - 2
Limestone fluidized bed treatment of acid-impacted water at the Craig Brook National Fish Hatchery, Maine, USA, 2006, Aquacultural Engineering (34) - 2
Comparative performance of fixed-film biological filters: Application of reactor theory, 2006, Aquacultural Engineering (34) - 3
Screening and evaluation of polymers as flocculation aids for the treatment of aquacultural effluents, 2005, Aquacultural Engineering (33) - 4
Validation of two dilution models to predict chloramine-T concentrations in aquaculture facility effluent, 2004, Aquacultural Engineering (30) - 3-4
Feasibility of measuring dissolved carbon dioxide based on head space partial pressures, 2004, Aquacultural Engineering (30) - 3-4
Evaluation of chemical coagulation-flocculation aids for the removal of suspended solids and phosphorus from intensive recirculating aquaculture effluent discharge, 2003, Aquacultural Engineering (29) - 1-2
Factors influencing the nitrification efficiency of fluidized bed filter with a plastic bead medium, 2002, Aquacultural Engineering (26) - 1
Factors influencing the nitrification efficiency of fluidized bed filter with a plastic bead medium, 2001, Aquacultural Engineering (26) - 1
Hydraulic characteristics of a rectangular mixed-cell rearing unit, 2000, Aquacultural Engineering (24) - 1
Importance of rearing-unit design and stocking density to the behavior, growth and metabolism of lake trout (Salvelinus namaycush), 1998, Aquacultural Engineering (19) - 1
Modeling gas transfer in a spray tower oxygen absorber, 1997, Aquacultural Engineering (16) -
Modeling gas transfer and biological respiration in a recirculating aquaculture system, 1996, Aquacultural Engineering (15) - 5
Gas-phase axial dispersion in a spray tower, 1996, Aquacultural Engineering (15) - 1
Influence of tank design and hydraulic loading on the behavior, growth, and metabolism of rainbow trout (Oncorhynchus mykiss), 1995, Aquacultural Engineering (14) - 1
Gas supersaturation in surface waters of aquaculture ponds, 1994, Aquacultural Engineering (13) - 1
Effect of subatmospheric pressure on the performance of an automated packed-column nitrogen desorption system, 1994, Aquacultural Engineering (13) - 1
Design of packed columns for commercial oxygen addition and dissolved nitrogen removal based on effluent criteria, 1990, Aquacultural Engineering (9) - 5
Modeling the effects of serial off-gas reuse on the performance of a hooded surface oxygen obsorption system, 1990, Aquacultural Engineering (9) - 2
Gas transfer within a multi-stage packed column oxygen absorber: Model development and application, 1990, Aquacultural Engineering (9) - 1
Gas phase axial dispersion in a packed column oxygen absorber, 1989, Aquacultural Engineering (8) - 6
A bioassay for production capacity assessment, 1988, Aquacultural Engineering (7) -
Design of airlift pumps for water circulation and aeration in aquaculture, 1987, Aquacultural Engineering (6) - 2
Total gas pressure and oxygen and nitrogen saturation in warmwater ponds aerated with airlift pumps, 1984, Aquacultural Engineering (3) - 2
Feasibility of saltwater gradient ponds as a heat supply for hatchery rearing water, 1984, Aquacultural Engineering (3) - 1
Effective flow-through vacuum degasser for fish hatcheries, 1983, Aquacultural Engineering (2) - 4