Link to USGS home page Link to USGS home page
Coastal and Marine Geology Program
Coastal & Marine Geology Program > Coastal Classification Mapping Project > Open File Report 2004-1044

Coastal Classification Atlas

Eastern Panhandle of Florida Coastal Classification Maps - Lighthouse Point to St. Andrew Bay Entrance Channel

USGS Open File Report 2004-1044

Robert A. Morton, Russell L. Peterson

Report Home Maps Overview Mapping Methods Coastal Classifications Geologic Setting Coastal Processes Coastal Vulnerability Classification Summary References

Mapping Methods

A coastal storm hazard assessment involves two different activities. The first is classification of ground conditions and the second is translation of that information into a storm hazard vulnerability index. Present ground morphology and any man-made alterations of the land were first interpreted in the laboratory using three independent visual sources:

  1. airborne color video surveys,
  2. 35 mm aerial color slides, and
  3. Digital Orthophoto Quarter Quadrangles (DOQQs) obtained from the U.S. Geological Survey EROS Data Center in Sioux Falls, South Dakota (
The video tapes and slides are oblique low-altitude photographs of the beach obtained during helicopter surveys with horizontal positions determined by a Global Positioning System (GPS). Dates of the various surveys are presented in Table 1.

Table 1. Types of imagery used for mapping and the dates they were acquired.
Type of Imagery Date
Aerial Oblique Video Survey July, 2001
Digital Orthophoto Quarter Quadrangle January, 1999
Lidar Survey November, 1998
Ground Observation and Map Verification November, 2002

The video surveys, slides, and DOQQs were used to prepare the coastal classification units (Fig. 2) and to interpret the geomorphological and cultural attributes of each coastal segment. Elevations of the land surface adjacent to the barren backbeach were obtained by processing lidar data. The highest elevations of the foredunes or beach crest (where dunes are absent) are shown as a series of dots. Each dot is color coded to represent a narrow range of elevations. The units of elevation are decimeters, or tenths of meters.

In some local areas there are substantial differences between the backbeach position observed on the DOQQs and those observed on the lidar surveys. These differences are attributed generally to coastal dynamics and specifically to beach erosion, spit accretion, or inlet migration. Examples of discrepancies between the DOQQs and lidar surveys are shown on the St. Teresa SE map. The dates of the surveys (Table 1) will indicate which beach position is most recent. In all areas, the lidar survey will be more recent than the DOQQ survey.

Coastal & Marine Geology Program > Coastal Classification Mapping Project > Open File Report 2004-1044

[an error occurred while processing this directive]