With backscatter intensity, the intensity of the acoustic return from the sea floor from the multibeam system, is a function of the properties of the surficial sediments and of the bottom roughness. Generally, a strong return (light gray tones) is associated with rock or coarse-grained sediment, and a weak return (dark gray tones) with fine-grained sediments. However, the micro-topography, such as ripples, burrows, and benthic populations also affect the reflectivity of the sea floor. Direct observations, using bottom photography or video, and surface samples, are needed to verify interpretations of the backscatter intensity data. The backscatter data have a weak striping that runs parallel to the ship's track. Some of the striping is the result of poor data return at nadir that appears as evenly-spaced thin speckled lines. Some striping is also due to critical angle effects, where the intensity of return varies as a function of the angle of incidence of the incoming sound on the seafloor (Hughes-Clark and others, 1997).
U.S. Geological Survey, 2006, CAPESOUTHMOS_MER4M.TIF - 4-m Image of the Southern Half of the Backscatter Intensity Mosaic of the Sea Floor off Eastern Cape Cod from USGS Cruise 98015 (Mercator): Open-File Report 2005-1048, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.This is part of the following larger work.Online Links:
- <http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/capesouthmos_mer4m.zip>
- <http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/capesouthmos_mer4m.tif>
- <http://pubs.usgs.gov/of/2005/1048/htmldocs/data_catalog.htm>
- <http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/>
Poppe, L.J., Paskevich, V.F., Butman, B., Valentine, P.C., Danforth, W.W., Foster, D.S., and Blackwood, D.S., 2006, Geological Interpretation of Bathymetric and Backscatter Imagery of the Sea Floor off Eastern Cape Cod, Massachusetts: Open-File Report 2005-1048, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.Online Links:
This is a Raster data set. It contains the following raster data types:
The map projection used is Mercator.
Planar coordinates are encoded using row and column
Abscissae (x-coordinates) are specified to the nearest 4.000000
Ordinates (y-coordinates) are specified to the nearest 4.000000
Planar coordinates are specified in meters
The horizontal datum used is D_WGS_1984.
The ellipsoid used is WGS_1984.
The semi-major axis of the ellipsoid used is 6378137.000000000000000000.
The flattening of the ellipsoid used is 1/298.257223563000030000.
(508) 548-8700 x2314 (voice)
(508) 457-2310 (FAX)
lpoppe@usgs.gov
To release a digital map (GeoTIFF image) derived from multibeam observations that shows sea floor backscatter intensity (a measure of sea floor texture and roughness) at a spatial resolution of 4 m/pixel.
After the echo sounder data were logged onto the hard disk of the Sun workstation, a suite of processing software developed by the Ocean Mapping Group (www.omg.unb.ca/~jhc/SwathEd.html) was used to correct for artifacts and errors that may have been introduced during data collection. This software also enhanced the corrected data by resolving beam pattern and aspect ratio distortions and by imposing a linear contrast stretch before it generated bathymetric and sidescan sonar image mosaics in a Mercator projection. All data processing described here is initiated using Silicon Graphics workstations as soon as each acquisition file is closed by the Simrad Mermaid workstation (usually at the end of each survey line). Additional processing was done in the lab to correct for fluctuations in sea level during the survey and for artifacts in the data files that were not corrected in the field (see below).
(2) The processing and editing steps on board the ship were:
(A.) Demultiplex, or unravel, the acquired Simrad data files using RT to generate separate files containing navigation, depth soundings, sidescan sonar backscatter values, and sound velocity information.
(B.) Automatically reject bad data (autoRejectSoundings). For the multibeam soundings, reject data outside expected depth ranges (operator's decision based on nautical chart data); for navigation data, reject fixes with poor GPS statistics.
(C.) Edit the navigation data on-screen using jview to remove undesirable points, including turns at the ends of survey lines.
(D.) Edit the multibeam soundings on-screen using swathed to remove individual anomalous soundings.
(E). Merge tidal information and the corrected navigation back (mergetide and mergenav) into the data files. Tidal information was obtained from predicted tides using the Xtide program <http://www.flaterco.com/xtide/xtide.html>), which generated predicted tides based on the harmonic coefficients for Chatham provided by the Xtide program.
(F.) Map the bathymetric soundings from each processed data file onto a Mercator grid using weigh_grid (a SwathEd utility) with node spacings and scale selected by the operator. The grid file (capesouth.r4) was a floating point binary file.
Person who carried out this activity:
(508) 548-8700 x2274 (voice)
(508) 457-2310 (FAX)
bdanforth@usgs.gov
Data sources produced in this process:
Person who carried out this activity:
(508) 548-8700 x2274 (voice)
(508) 457-2310 (FAX)
bdanforth@usgs.gov
Data sources produced in this process:
Poppe, L.J., Foster, D.S., and Danforth, W.W., 2006, Character and distribution of exposed glaciodeltaic deposits off outer Cape Cod, Massachusetts, and their effects on hydrogeology and benthic habitats: Geo-Marine Letters v. 26, Springer, Germany.
Navigation was by differential GPS.
All collected data were processed and used to produce this dataset.
Are there legal restrictions on access or use of the data?
- Access_Constraints: None
- Use_Constraints:
- Public domain data are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey (USGS) as the source of this information.
(508) 548-8700 x2314 (voice)
(508) 457-2310 (FAX)
lpoppe@usgs.gov
Downloadable Data
Although all data have been used by the USGS, no warranty, expressed or implied, is made by the USGS as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials.Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. government.
| Data format: | GeoTIFF format backscatter mosaic, GeoTIFF world file and associated metadata in format TIFF GeoTIFF Size: 0.000 |
|---|---|
| Network links: |
<http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/capesouthmos_mer4m.zip> <http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/capesouthmos_mer4m.tif> <http://pubs.usgs.gov/of/2005/1048/htmldocs/data_catalog.htm> <http://pubs.usgs.gov/of/2005/1048/data/backscatter/mosaic/mercator/> |
| Media you can order: |
DVD-ROM
(Density 4.7
Gbytes)
(format UDF)
|
This image is available as a GeoTIFF image with an accompanying world file. To utilize this data, the user must have an image viewer, image processing or GIS software package capable of importing a GeoTIFF image.
(508) 548-8700 x2314 (voice)
(508) 457-2310 (FAX)
lpoppe@usgs.gov
