LIQUEFACTION POTENTIAL OF SEDIMENT IN THE NORTHERN BERING SEA.
By: William J. Winters
Edited by: Chaney Ronald C.Demars Kenneth R.
Links
- The Publications Warehouse does not have links to digital versions of this publication at this time
- Download citation as: RIS | Dublin Core
Abstract
The liquefaction potential of sediment in Norton Sound and the northern Bering Sea was evaluated by estimating the liquefaction susceptibility of the material from in-situ and laboratory tests in terms of earthquake and wave loads required to liquefy the material, and then comparing estimated behavior with anticipated loadings caused by frequent storm waves in the relatively shallow water depths and infrequent earthquakes. In-situ cone penetration tests (CPT) were performed at 13 stations. After the CPT data were transformed into equivalent standard penetration test (SPT) blow counts, analyses were performed that determined earthquake accelerations and sustained relative storm wave heights that would cause liquefaction. Vibratory core samples, up to 6 m long, were obtained in silty sand grading to sandy silt near many of the CPT locations. Results of cyclic triaxial tests performed on those samples were used to calculate earthquake accelerations and sustained storm wave heights that would liquefy the sediment.
Suggested Citation
Winters, W.J., 1985, LIQUEFACTION POTENTIAL OF SEDIMENT IN THE NORTHERN BERING SEA., in ASTM Special Technical Publication, San Diego, CA, USA, p. 454-472.
| Publication type | Conference Paper |
|---|---|
| Publication Subtype | Conference Paper |
| Title | LIQUEFACTION POTENTIAL OF SEDIMENT IN THE NORTHERN BERING SEA. |
| ISBN | 0803104316 |
| Year Published | 1985 |
| Language | English |
| Publisher | ASTM |
| Publisher location | Philadelphia, PA, USA |
| Larger Work Title | ASTM Special Technical Publication |
| First page | 454 |
| Last page | 472 |
| Conference Title | Strength Testing of Marine Sediments: Laboratory and In-Situ Measurements. |
| Conference Location | San Diego, CA, USA |