Measurement of chloride concentration and water equivalent in precipitation and recharge at a site can be extrapolated to determine available moisture in a nearby basin. This method also may be extrapolated to a basin with similar climatic characteristics if precipitation, vegetation, and topographic data are available. The average accuracy of the total of evaporation, recharge, and runoff (assuming no storage) was about 10% of total precipitation. Soil-moisture measurements indicate the entire 10% error in moisture balance can be attributed to annual changes in storage. Data requirements for the method are considerably less than data requirements for energy-budget methods to determine available moisture.

Potential applications of the method to hydrologic problem-solving are:

1. (1) Estimating total available moisture from chloride concentrations in groundwater or surface water or both.

2. (2) Modeling paleoclimate scenarios and evaluating their correctness by comparison with paleo-groundwater chloride concentrations.

3. (3) Providing an independent comparison for water budgets obtained by energy-budget methods. Obviously the method cannot be applied readily to systems with a lithologic source of chloride. Most systems primarily consisting of tuff, intrusive volcanic rock, nonmarine sediments, quartzite, and other metamorphic rocks will be suitable for application of the model.