Various parameters of the internal structure of a debris-avalanche deposit from ancestral Mount Shasta (size and percentage of block facies in each exposure, number and width of jigsaw cracks, and number of rounded clasts in matrix facies) were measured in order to study flow and emplacement mechanisms. Three types of coherent blocks were identified: blocks of massive or brecciated lava flows or domes, blocks of layered volcaniclastic deposits, and blocks of accidental material, typically from sedimentary units underlying Shasta Valley. The mean maximum dimension of the three largest blocks of layered volcaniclastic material is 220 m, and that of the lava blocks, 110 m. This difference may reflect plastic deformation of blocks of layered volcaniclastic material; blocks of massive or brecciated volcanic rock deformated brittly and may have split into several smaller blocks. The blocks in the deposit are one order of magnitude larger, and the height of collapse 1100 m higher, than the Pungarehu debris-avalanche deposit at Mount Egmont, New Zealand, although the degree of fracturing is about the same.This suggests either that the Shasta source material was less broken, or that the intensity of any accompanying explosion was smaller at ancestral Mount Shasta. The Shasta debris-avalanche deposit covered the floor of a closed basin; the flanks of the basin may have retarded the opening of jigsaw cracks and the formation of stretched and deformed blocks such as those of the Pungarehu debris-avalanche deposit. ?? 1986 Springer-Verlag.