We conducted deformation experiments on Carrara marble in the aragonite and calcite stability fields to observe the synkinematic transformation of calcite to aragonite, and to identify any relationships between transformation and deformation or sample strength. Deformation-induced microstructures in calcite crystals varied most significantly with temperature, ranging from limited slip and twinning at 400°C, limited recrystallization at 500°C, widespread recrystallization at 600 and 700°C, to grain growth at 800–900°C. Variations in confining pressure from 0.3 to 2.0 GPa have no apparent effect on calcite deformation microstructures. Aragonite grew in 10⁻⁶-10⁻⁷ s⁻¹strain rate tests conducted for 18–524 h at confining pressures of 1.7–2.0 GPa and temperatures of 500–600°C. As in our previously reported hydrostatic experiments on this same transformation, the aragonite nucleated on calcite grain boundaries. The extent of transformation varied from a few percent conversion near pistons at 400°C, 2.0 GPa and 10⁻⁴ s⁻¹ strain rate in a 0.8 h long experiment, to 98% transformation in a 21-day test at a strain rate of 10⁻⁷ s⁻⁷, a temperature of 600°C and a pressure of 2.0 GPa. At 500°C, porphyroblastic 100–200 μm aragonite crystals grew at a rate faster than 8 × 10⁻¹m s⁻¹. At 600°C, the growth of aragonite neoblasts was slower, ≈6 × 10⁻¹ m s ⁻¹, and formed ‘glove-and-finger’ cellularprecipitation-like textures identical to those observed in hydrostatic experiments. The transformation to aragonite is not accompanied by a shear instability or anisotropic aragonite growth, consistent with its relatively small volume change and latent heat in comparison with compounds that do display those features.