Thermal conductivity measurements in porous mixtures of methane hydrate and quartz sand
Geophysical Research Letters
By: W.F. Waite, B.J. deMartin, S.H. Kirby, J. Pinkston, and C.D. Ruppel
Links
- More information: Publisher Index Page (via DOI)
- Download citation as: RIS | Dublin Core
Abstract
Using von Herzen and Maxwell's needle probe method, we measured thermal conductivity in four porous mixtures of quartz sand and methane gas hydrate, with hydrate composing 0, 33, 67 and 100% of the solid volume. Thermal conductivities were measured at a constant methane pore pressure of 24.8 MPa between -20 and +15??C, and at a constant temperature of -10??C between 3.5 and 27.6 MPa methane pore pressure. Thermal conductivity decreased with increasing temperature and increased with increasing methane pore pressure. Both dependencies weakened with increasing hydrate content. Despite the high thermal conductivity of quartz relative to methane hydrate, the largest thermal conductivity was measured in the mixture containing 33% hydrate rather than in hydrate-free sand. This suggests gas hydrate enhanced grain-to-grain heat transfer, perhaps due to intergranular contact growth during hydrate synthesis. These results for gas-filled porous mixtures can help constrain thermal conductivity estimates in porous, gas hydrate-bearing systems.
| Publication type | Article |
|---|---|
| Publication Subtype | Journal Article |
| Title | Thermal conductivity measurements in porous mixtures of methane hydrate and quartz sand |
| Series title | Geophysical Research Letters |
| DOI | 10.1029/2002GL015988 |
| Volume | 29 |
| Issue | 24 |
| Year Published | 2002 |
| Language | English |
| Contributing office(s) | Woods Hole Coastal and Marine Science Center |
| Description | 83 p. |
| First page | 1 |
| Last page | 82 |
| Google Analytic Metrics | Metrics page |