Amplification of seismic waves by the Seattle basin, Washington state

Bulletin of the Seismological Society of America
By: , and 

Links

Abstract

Recordings of the 1999 Mw 7.6 Chi-Chi (Taiwan) earthquake, two local earthquakes, and five blasts show seismic-wave amplification over a large sedimentary basin in the U.S. Pacific Northwest. For weak ground motions from the Chi-Chi earthquake, the Seattle basin amplified 0.2- to 0.8-Hz waves by factors of 8 to 16 relative to bedrock sites west of the basin. The amplification and peak frequency change during the Chi-Chi coda: the initial S-wave arrivals (0–30 sec) had maximum amplifications of 12 at 0.5–0.8 Hz, whereas later arrivals (35–65 sec) reached amplifications of 16 at 0.3–0.5 Hz. Analysis of local events in the 1.0- to 10.0-Hz frequency range show fourfold amplifications for 1.0-Hz weak ground motion over the Seattle basin. Amplifications decrease as frequencies increase above 1.0 Hz, with frequencies above 7 Hz showing lower amplitudes over the basin than at bedrock sites. Modeling shows that resonance in low-impedance deposits forming the upper 550 m of the basin beneath our profile could cause most of the observed amplification, and the larger amplification at later arrival times suggests surface waves also play a substantial role. These results emphasize the importance of shallow deposits in determining ground motions over large basins.

Study Area

Publication type Article
Publication Subtype Journal Article
Title Amplification of seismic waves by the Seattle basin, Washington state
Series title Bulletin of the Seismological Society of America
DOI 10.1785/0120010292
Volume 93
Issue 2
Year Published 2003
Language English
Publisher Seismological Society of America
Description 13 p.
First page 533
Last page 545
Country United States
State Washington
Other Geospatial Seattle basin
Google Analytic Metrics Metrics page
Additional publication details