The Aleutian Basin is the deep water (>3000 m) basin that lies north of the Aleutian Islands adjacent to the Bering Sea continental shelf. The basin, about the size of the state of Texas, is underlain by a 2-9 km-thick flat-lying sequence of mostly Cenozoic sediment and rock that includes diatomaceous silty clay interbedded with turbidities in the upper 1 km. Before 1974, geologic and geophysical investigations in the Aleutian Basin were directed at determining its geologic history; more recently, investigations have also been aimed at assessing the basin's hydrocarbon potential. The four major requirements for hydrocarbon accumulation may be present, namely, structural and stratigraphic traps, source rocks, reservoir beds, and an adequate thermal and sedimentation history. Energy resource investigations by the US Geological Survey indicate that: (1) numerous structural features (gentle folds, diapirs, basement ridges) are present in the central and eastern parts of the basin, (2) acoustic features (VAMP's _ Velocity AMPlitude features) that may be due to trapped gases within the sedimentary section are common (over 350 identified) in the central basin, (3) concentrations of organic gases, primarily methane, in the upper 1-3 m beneath the seafloor are very small, they increase with depth, and they are highest in areas near VAMP's, and (4) both the thermal gradient and the sediment thickness are sufficiently great to allow hydrocarbon maturation at depth, if source rocks are present. Adverse conditions in the Aleutian Basin such as excessive water depths and severe weather pose difficult technical problems for the recovery of hydrocarbons that may be present. The data nevertheless suggest the basin is a promising site for hydrocarbon accumulations and therefore warrants further exploration.