A large subaerial landslide entered Taan Fiord, Alaska, on 17 October 2015 producing a tsunami with runup to 193 m. We use LiDAR data to show the slide volume to be 76 + 3/−4 million cubic meters and that 51,000,000 m³ entered Taan Fiord. In 2016, we mapped the fjord with multibeam bathymetry and high‐resolution seismic data. Landslide and postlandslide deposits extend 6 km downfjord, are up to 70 ± 11 m thick, and have a total volume of ~147,000,000 m³. Seismic data image a blocky landslide unit and two units deposited immediately after the landslide. The blocky landslide unit is ~65,000,000 m³. We infer it consists dominantly of subaerially derived material and secondarily of fjord floor sediment. The overlying units are likely megaturbidites presumably deposited within minutes to days after the landslide. We infer that these deposits dominantly consist of fjord floor material mobilized and suspended as the slide entered and traveled downfjord. The lower postlandslide unit is up to 35 ± 6 m thick, and the upper unit is up to 12 ± 3 m thick. These deposits are distinctive and will leave a lasting record of the event. This subaerial‐to‐submarine landslide deposit is distinct from other submarine landslide deposits studied in Alaskan fjords because it has a much greater thickness, larger and more angular blocks, distinctive postlandslide megaturbidites, and a higher‐amplitude acoustic signature of the blocky deposit. The tight constraints on the landslide source and deposit volumes, topography, bathymetry, and tsunami runup heights and flow directions should make this a benchmark site for landslide‐tsunami models.