These datasets were compiled in support of U.S. Geological Survey Data Series 456, Design and Installation of a Groundwater Monitoring-Well Network in the High Plains Aquifer, Colorado. These datasets were developed as part of a cooperative project between the U.S. Geological Survey and the Colorado Department of Agriculture. The purpose of the project was to design a 30-well network and install 20 of the 30 wells to characterize water quality in the High Plains aquifer in areas of irrigated agriculture in Colorado. The five datasets are described as follows and are further described in Data Series 456: (1) ds472_dtw: This dataset represents the depth to groundwater in the High Plains Aquifer in Colorado in 2000. This grid was used to determine areas where the depth to water was less than 200 feet below land surface. (2) Ds472_sat: This dataset represents the saturated thickness of the High Plains aquifer within Colorado in 2000. This grid was used to determine areas where the saturated thickness was greater than 50 feet. (3) Ds472_equalareas: This dataset includes 30 equal-area polygons overlying the High Plains Aquifer in Colorado having a depth to water less than 200 feet, a saturated thickness greater than 50 feet, and underlying irrigated agricultural lands. (4) Ds472_randomsites: This dataset includes 90 randomly-generated potential groundwater sampling sites. This dataset provides a first, second, and third choice placed within the 30 equal area polygons of dataset dsXX_equalareas. (5) Ds472_welldata: This dataset includes point locations and well completion data for the 20 wells installed as part of this project. The datasets that pertain to this report can be found on the U.S. Geological Survey's NSDI (National Spatial Data Infrastructure) Node, the links are provided on the sidebar.