FEMFLOW3D; a finite-element program for the simulation of three-dimensional aquifers; version 1.0

Open-File Report 97-810
The USGS does not support this software or technical questions for the software associated with the publication.
By:  and 



This document describes a computer program that simulates three-dimensional ground- water systems using the finite-element method. The program was developed to simulate regional ground-water systems, but it can be applied to small-scale problems as well. This program can be used to simulate both confined and water-table aquifers. The program simulates a linearized three-dimensional free-surface ground-water system with a fixed grid. FEMFLOW3D is applicable to the simulation of various free-surface ground-water systems for which the change in aquifer thickness is small relative to the overall aquifer thickness. The finite-element method provides flexibility in the design of a geometric grid that represents the physical dimensions of an aquifer system. For example, features that can be well represented with a finite-element grid include irregular, random geographic and geologic features; irregular boundaries; and increased detail within localized areas of particular interest within the study area. The structure of the computer program consists of a main program, which serves as a simple driver, and a set of subroutines in which the calculations are performed. The background, mathematical basis, structure, and inputs for each of the subroutines are described in the document where applicable. Each subroutine generally handles (1) a part of the mathematical calculations related to the finite-element method, (2) a specific feature of the hydrologic system, or (3) special features related to the management input or output data. Hydrologic features that can be represented with the program include stream-aquifer interactions, phreatophytic evapotranspiration, highly permeable fault zones, land subsidence, and land-aquifer interactions associated with land-use activities. The program can also represent the primary features associated with complex irrigation systems, such as irrigated agriculture, and can calculate the ground-water recharge that results from these activities. Three boundary conditions, including specified-head boundaries, specified-flux boundaries, and variable-flux boundaries, can be represented with the program. The program also provides a method for identifying aquifer and river-bed parameters that can be used in the calibration of models. This document also includes model validation, source code, and example input and output files. Model validation was performed using four test problems. For each test problem, the results of a model simulation with FEMFLOW3D were compared with either an analytic solution or the results of an independent numerical approach. The source code, written in the ANSI x3.9-1978 FORTRAN standard, and the complete input and output of an example problem are listed in the appendixes.
Publication type Report
Publication Subtype USGS Numbered Series
Title FEMFLOW3D; a finite-element program for the simulation of three-dimensional aquifers; version 1.0
Series title Open-File Report
Series number 97-810
DOI 10.3133/ofr97810
Edition -
Year Published 1998
Language ENGLISH
Publisher U.S. Dept. of the Interior, U.S. Geological Survey ;Information Services [distributor],
Description vii, 338 p. :ill. ;28 cm. +1 computer disk (3 1/2 in.)
Google Analytic Metrics Metrics page
Additional publication details