thumbnail

Water, Energy, and Biogeochemical Model (WEBMOD), user’s manual, version 1

Techniques and Methods 6-B35
By:  and 
https://doi.org/10.3133/tm6B35

Links

Abstract

The Water, Energy, and Biogeochemical Model (WEBMOD) uses the framework of the U.S. Geological Survey (USGS) Modular Modeling System to simulate fluxes of water and solutes through watersheds. WEBMOD divides watersheds into model response units (MRU) where fluxes and reactions are simulated for the following eight hillslope reservoir types: canopy; snowpack; ponding on impervious surfaces; O-horizon; two reservoirs in the unsaturated zone, which represent preferential flow and matrix flow; and two reservoirs in the saturated zone, which also represent preferential flow and matrix flow. The reservoir representing ponding on impervious surfaces, currently not functional (2016), will be implemented once the model is applied to urban areas. MRUs discharge to one or more stream reservoirs that flow to the outlet of the watershed. Hydrologic fluxes in the watershed are simulated by modules derived from the USGS Precipitation Runoff Modeling System; the National Weather Service Hydro-17 snow model; and a topography-driven hydrologic model (TOPMODEL). Modifications to the standard TOPMODEL include the addition of heterogeneous vertical infiltration rates; irrigation; lateral and vertical preferential flows through the unsaturated zone; pipe flow draining the saturated zone; gains and losses to regional aquifer systems; and the option to simulate baseflow discharge by using an exponential, parabolic, or linear decrease in transmissivity. PHREEQC, an aqueous geochemical model, is incorporated to simulate chemical reactions as waters evaporate, mix, and react within the various reservoirs of the model. The reactions that can be specified for a reservoir include equilibrium reactions among water; minerals; surfaces; exchangers; and kinetic reactions such as kinetic mineral dissolution or precipitation, biologically mediated reactions, and radioactive decay. WEBMOD also simulates variations in the concentrations of the stable isotopes deuterium and oxygen-18 as a result of varying inputs, mixing, and evaporation. This manual describes the WEBMOD input and output files, along with the algorithms and procedures used to simulate the hydrology and water quality in a watershed. Examples are presented that demonstrate hydrologic processes, weathering reactions, and isotopic evolution in an alpine watershed and the effect of irrigation on water flows and salinity in an intensively farmed agricultural area.

Suggested Citation

Webb, R.M.T., and Parkhurst, D.L., 2017, Water, Energy, and Biogeochemical Model (WEBMOD), user’s manual, version 1: U.S. Geological Survey Techniques and Methods, book 6, chap. B35, 171 p., https://doi.org/10.3133/tm6B35.

ISSN: 2328-7055 (online)

Table of Contents

  • Preface
  • Abstract
  • Introduction
  • Quick Start Guide
  • Hydrologic Processes
  • Geochemical Processes
  • Example Problems
  • Summary
  • References
Publication type Report
Publication Subtype USGS Numbered Series
Title Water, Energy, and Biogeochemical Model (WEBMOD), user’s manual, version 1
Series title Techniques and Methods
Series number 6-B35
DOI 10.3133/tm6B35
Year Published 2017
Language English
Publisher U.S. Geological Survey
Publisher location Reston, VA
Contributing office(s) Branch of Regional Research, National Research Program - Central Branch
Description xiv, 171 p.
Larger Work Type Report
Larger Work Subtype USGS Numbered Series
Larger Work Title Section B: Surface Water in Book 6: Modeling Techniques
Public Comments This report is Chapter 35 of Section B: Surface Water in Book 6 Modeling Techniques
Online Only (Y/N) Y
Google Analytic Metrics Metrics page
Additional publication details