Water resources of Beaver Valley, Utah
Location and extent of area examined. Beaver Valley is located in Beaver County, in southwestern Utah, about 175 miles south of Salt Lake. It lies between the Tushar Mountains on the east and the Beaver Mountains on the west. The principal town of the valley is Beaver, which is most conveniently reached from Milford, a station on the San Pedro, Los Angeles and Salt Lake Railroad. The valley, together with its neighboring highlands, occupies the eastern third of Beaver County, an area of about 1,200 square miles. A large part of this area, however, is rocky upland and unproductive desert, the tillable land comprising a comparatively small area in the immediate vicinity of the streams.
Purpose and scope of work. The purpose of this paper is to present information concerning the waters of Beaver Valley and to point out ways and means of increasing their usefulness. The presence of a large amount of water in Beaver Valley results from local topograhic conditions, the water being supplied by precipitation in the highland to the east. Its conservation and distribution result from geologic conditions, the water being held in loose gravel and sand, which are more or less confined between ridges of consolidated rocks. The rock basins were formed partly by erosion and partly by faulting and surface deformation. In order to accomplish the purpose in view it is therefore necessary to describe the geographic and geologic conditions in Beaver Valley and neighboring regions.
The investigation included the determination of the flow of streams and springs, of the manner of occurrence and quantity of the underground waters as shown by the geologic and geographic conditions of the region and by the distribution of springs and wells, and of the chemical character of the waters with reference to their adaptability to domestic use and to irrigation. The chemical data were obtained (a) by field assays, which are approximately correct and probably of sufficient accuracy to be of value in comparing the various waters; (b) by more exact analyses, some of which were made in the laboratory of the United States Geological Survey by W. M. Barr, and others by Herman Harms, State chemist of Utah, for the San Pedro, Los Angeles and Salt Lake Railroad; and (c) by sanitary analyses, made also by Herman Harms.
Cooperation. The work was done during the summer of 1906, the United States Geological Survey cooperating with the State of Utah through Caleb Tanner, State engineer, and with the county of Beaver through the supervisors of the county. In collecting the information the writer was assisted by J. F. Hoyt, of Nephi, Utah.
|Publication Subtype||USGS Numbered Series|
|Title||Water resources of Beaver Valley, Utah|
|Series title||Water Supply Paper|
|Publisher||U.S. Government Printing Office|
|Publisher location||Washington, D.C.|
|Contributing office(s)||Utah Water Science Center|
|Other Geospatial||Beaver Valley|
|Google Analytic Metrics||Metrics page|