Figure 8a
figure 8b

Figure 8. Generalized longitudinal hydrogeologic section across central Yucca Flat showing mechanical effects of underground testing. Underground test locations obtained from U.S. Department of Energy (1994). Cavity dimensions and fracture zones calculated using measurements of cavity radius and working-point depths as summarized in classified listing of test parameters (Lawrence Livermore National Laboratory, written commun., 1991). Locations of sections is shown in figure 9.

Return to WRIR 96-4109||Return to the Index||Go to WRIR 96-4109 Plates

USGS Water home page || USGS home page

The pathname for this page is <fig8.htm>
These pages are maintained by S.C. DeMeo
Last modified Wednesday, 07-Dec-2016 12:41:10 EST