00SCC02 Operations FACS - Archive of Boomer Seismic Reflection Data Collected During USGS Cruises 00SCC02 and 00SCC04, Barataria Basin, Louisiana, May 12 - 31 and June 17

Find U.S. Geological Survey Coastal and Marine Geology Program Web Information

00SCC02 OPERATIONS FACS

Overview | Equipment | Operations | Crew

Equipment Code	ID	Start Day	Start Hour	Start Minute	End Day	End Hour	End Minute	End Comment
Activity ID: 00SCC02				USGS CMG FACS Operation Log
BOOM	bss00_01a	133	20	36	133	21	47
BOOM	bss00_01b	133	22	47	133	23	01
BOOM	bss00_02	133	22	07	133	22	20
BOOM	bss00_03	134	16	47	134	17	38	No Trigger - Bad Line
BOOM	bss00_04	134	17	48	134	18	08
BOOM	bss00_05	134	20	43	134	22	58	Seis PC locks up
BOOM	bss00_6	136	14	52	136	15	47
BOOM	bss00_06a	136	15	54	136	17	27	Data format changed from SEG-Y, Moto to Elics
BOOM	bss00_07	136	17	47	136	18	27
BOOM	bss00_07a	136	18	33	136	19	43
BOOM	bss00_08	136	19	46	136	22	37	Data format changed back to SEG-Y, Moto from Elics
BOOM	bss00_09	137	13	41	137	14	48	Seis PC crash, PC reset, trigger fail
BOOM	bss00_09a	137	14	54	137	15	08	Seis PC crash, PC reset, trigger fail
BOOM	bss00_09b	137	15	45	137	18	11
BOOM	bss00_10	137	18	15	137	20	07
BOOM	bss00_11	137	20	09	137	21	23
BOOM	bss00_11a	137	21	47		22	02
BOOM	bss00_12	137	22	04	137	23	29
BOOM	bss00_13	138	14	23	138	15	24	Using OYO Plotter
BOOM	bss00_15	138	18	07	138	20	49
BOOM	bss00_16	139	13	57	139	15	21	Switch to Alden Plotter
BOOM	bss00_17	139	15	23	139	17	38
BOOM	bss00_18	139	17	47	139	20	01
BOOM	bss00_19	139	20	05	139	23	00
BOOM	bss00_20	141	13	25	141	16	14	Note: installed relay closure in line @ seismic trigger - logging seismic data @ 6 ms delay, hopefully to get over the 6 ms trigger problem, Note: changed to 5 ms delay.
BOOM	bss00_21	141	16	19	141	17	01
BOOM	bss00_22	141	17	03	141	19	40
BOOM	bss00_23	142	13	04	142	14	47
BOOM	bss00_24	142	14	48	142	16	05
BOOM	bss00_25	142	16	07	142	17	32
BOOM	bss00_26	142	17	37	142	21	57
BOOM	bss00_27	142	21	59	142	22	50
BOOM	bss00_28	143	12	58	143	14	44	Appears all data are correct except for year
BOOM	bss00_28b	143	17	00	143	17	11	Note: Day, Month, Year Incorrect No GPS Connectors GPS antenna cleaned and reconnected Ok - now using cent_rmc.pln
BOOM	bss00_28c	143	17	48	143	18	36	Using Gilbert Nav Graphic
BOOM	bss00_29	143	18	40	143	20	34	No Day or Year Written to the Header
BOOM	bss00_30	143	20	36	143	22	11	Shot Interval=245ms, Record length=24ms, Samp Freq=25KHZ
BOOM	bss00_31	144	14	21	144	16	53	Start roll #6 seismic
BOOM	bss00_32	145	12	40	145	14	42
BOOM	bss00_33	145	15	59	145	17	14	End roll #6 start roll #7
BOOM	bss00_33a	145	17	22	145	17	56
BOOM	bss00_34	145	18	55	145	19	16
BOOM	bss00_35	145	19	59	145	22	09	Had to clean center jet
BOOM	bss00_36	146	12	24	146	16	29	Good seismic *buried pipes @ shot 47430, 15:35
BOOM	bss00_37	146	16	33	146	16	59	AC plug out of Alden - froze up
BOOM	bss00_37a	146	17	01	146	19	39
BOOM	bss00_38	149	12	11	149	13	50
BOOM	bss00_38a	149	13	56	149	17	08	6 ms eliminator box put in trigger line @ 13:38
BOOM	bss00_39	149	18	04	149	19	08
BOOM	bss00_40	149	19	53	149	20	56
BOOM	bss00_41	150	12	02	150	18	20
BOOM	bss00_42	150	18	30	150	20	52
BOOM	bss00_43	150	20	57	150	21	58
BOOM	bss00_44	150	22	16	150	22	58
BOOM	bss00_45	151	13	05	151	16	04	Using cent_rmc.pln nav driver power supply up to 200 Joules
BOOM	bss00_46	151	16	21	151	19	33
BOOM	bss00_47	151	19	38	151	22	15
BOOM	bss00_48	152	12	53	152	17	52
BOOM	bss00_49	152	18	13	152	19	03
BOOM	bss00_50	152	20	00	152	21	56	End roll #8

USGS CMG FACS Operation Log

bss00_01a