A multipurpose camera system for monitoring Kīlauea Volcano, Hawai'i

Techniques and Methods 13-A2
By: , and 

Links

  • More information: USGS Index Page
  • Document: Report (7.9 MB pdf)
  • Companion Files:
    • Halema'uma'u plume time-lapse MOV (54.7 MB) This video shows an image every 10 minutes, from February 3, 2014, at 0001 Hawai‘i Standard Time (HST) to February 9, 2014, at 2359 HST. The movie shows the commonly fluctuating wind directions typical of winter months, when the normally steady trade winds become unstable. The camera was positioned in the Hawaiian Volcano Observatory observation tower. In the lower right corner of the image is the public overlook at Jaggar Museum.
    • Halema'uma'u lake time-lapse MP4 (7.4 MB) This video shows an image every minute, from February 14, 2014, at 1200 Hawai‘i Standard Time (HST) to February 15, 2014, at 1200 HST. The plot of RSAM (real-time seismic amplitude measurement), which can be taken as a proxy for the amplitude of seismic tremor, is shown below. Spikes in RSAM correspond with the appearance of additional spattering sources on the lake margin, whereas the sustained low level in RSAM after about 0800 on February 15 is an indicator of the absence of spattering at the lake and very quiet activity.
    • Halema'uma'u lake video clips MOV (20.2 MB) Four clips from February 2014 are shown, taken at the following times: (1) February 14, 1200 Hawai‘i Standard Time (HST); (2) February 14, 1800 HST; (3) February 15, 0000 HST; (4) February 15, 0600 HST. Videos are shown at 3× speed.
    • Halema'uma'u lake video clips MP4 (4.7 MB) Four clips from February 2014 are shown, taken at the following times: (1) February 14, 1200 Hawai‘i Standard Time (HST); (2) February 14, 1800 HST; (3) February 15, 0000 HST; (4) February 15, 0600 HST. Videos are shown at 3× speed.
    • Halema'uma'u plume time-lapse MP4 (14.9 MB) This video shows an image every 10 minutes, from February 3, 2014, at 0001 Hawai‘i Standard Time (HST) to February 9, 2014, at 2359 HST. The movie shows the commonly fluctuating wind directions typical of winter months, when the normally steady trade winds become unstable. The camera was positioned in the Hawaiian Volcano Observatory observation tower. In the lower right corner of the image is the public overlook at Jaggar Museum.
    • Halema'uma'u lake time-lapse MOV (19.1 MB) This video shows an image every minute, from February 14, 2014, at 1200 Hawai‘i Standard Time (HST) to February 15, 2014, at 1200 HST. The plot of RSAM (real-time seismic amplitude measurement), which can be taken as a proxy for the amplitude of seismic tremor, is shown below. Spikes in RSAM correspond with the appearance of additional spattering sources on the lake margin, whereas the sustained low level in RSAM after about 0800 on February 15 is an indicator of the absence of spattering at the lake and very quiet activity.
  • Download citation as: RIS | Dublin Core

Abstract

We describe a low-cost, compact multipurpose camera system designed for field deployment at active volcanoes that can be used either as a webcam (transmitting images back to an observatory in real-time) or as a time-lapse camera system (storing images onto the camera system for periodic retrieval during field visits). The system also has the capability to acquire high-definition video. The camera system uses a Raspberry Pi single-board computer and a 5-megapixel low-light (near-infrared sensitive) camera, as well as a small Global Positioning System (GPS) module to ensure accurate time-stamping of images. Custom Python scripts control the webcam and GPS unit and handle data management. The inexpensive nature of the system allows it to be installed at hazardous sites where it might be lost. Another major advantage of this camera system is that it provides accurate internal timing (independent of network connection) and, because a full Linux operating system and the Python programming language are available on the camera system itself, it has the versatility to be configured for the specific needs of the user. We describe example deployments of the camera at Kīlauea Volcano, Hawai‘i, to monitor ongoing summit lava lake activity. 

Study Area

Publication type Report
Publication Subtype USGS Numbered Series
Title A multipurpose camera system for monitoring Kīlauea Volcano, Hawai'i
Series title Techniques and Methods
Series number 13-A2
DOI 10.3133/tm13A2
Year Published 2015
Language English
Publisher U.S. Geological Survey
Publisher location Reston, VA
Contributing office(s) Volcano Science Center
Description Report: iv, 25 p.; 6 videos
Larger Work Type Report
Larger Work Subtype USGS Numbered Series
Larger Work Title Section A: Methods Used in Volcano Monitoring in Book 13 Volcano Monitoring
Public Comments This report is Chapter 2 of Section A: Methods Used in Volcano Monitoring in Book 13 Volcano Monitoring.
Country United States
State Hawai'i
Other Geospatial Kīlauea Volcano
Online Only (Y/N) Y
Additional Online Files (Y/N) Y
Google Analytic Metrics Metrics page
Additional publication details